1017 TIME-ELECTRONICS | Alldatasheet
Document overview
- Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
- PDF pages: 2
Technical content
Features
- DC voltage 10 nV to 100 V
- DC current 100 nA to 100 mA
- Resistance 10 mΩ to 10 kΩ
- Accuracy 0.005 % (50 ppm)
- 1 ppm setting resolution
- Noise < 2 ppm (0.1 to 1 Hz)
- Stability < 5 ppm/day, < 25 ppm/yr
- Deviation control - voltage and current
- Battery or mains operation Portable Operation The 1017 can be powered from mains supply or by the internal rechargeable battery pack. Battery operation enables good performance where earth loop and noise pick-up occurs. When the calibrator is plugged into the mains supply the internal batteries will automatically start to recharge. If unplugged from the mains during operation the internal batteries will continue to power the instrument. Full charge allows 12 hours typical use. An LED indicator on the front panel displays the battery condition.
1017 Voltage/Current/Resistance Calibrator
Time Electronics Ltd, Unit 5, T O N Business Park, 2-8 Morley Road, T onbridge, Kent, TN9 1RA, United Kingdom T : +44 (0) 1732 355993 | F: +44 (0) 1732 350198 | mail@timeelectronics.co.uk | www.timeelectronics.com v2c Due to continuous development Time Electronics reserves the right to change specifications without prior notice. Technical Specifications The above accuracies are independent of thermal emfs which can be 2 μV or more depending on the type of leads and connections used. General Specifications