BYM13-20 GE | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 2
Technical content
SURFACE MOUNT SCHOTTKY BARRIER RECTIFIER Reverse Voltage - 20 to 60 Volts Forward Current - 1.0 Ampere
FEATURES
♦ Plastic package has carries Underwriters Laboratory Flammability Classifications 94V-0 ♦ For surface mounted applications ♦ Metal silicon junction, majority carrier conduction ♦ High surge capability ♦ Low power loss, high efficiency ♦ High current capability, low forward voltage drop ♦ For use in low voltage, high frequency inverters, free wheeling and polarity protection applications ♦ Guardring for overvoltage protection ♦ High temperature soldering guaranteed: 250°C/10 seconds at terminals MECHANICAL DATA Case: JEDEC DO-213AB molded plastic body Terminals:Solder plated, solderable per MIL-STD-750, Method 2026 Polarity:Two bands indicate cathode end 1st band denotes device type 2nd band denotes voltage type Mounting Position:Any Weight:0.116 gram, 0.0041 ounce MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Ratings at 25°C ambient temperature unless otherwise specified. BYM13 SYMBOLS -20 -30 -40 -50 -60 UNITS Denotes Schottky devices: 1st band is orange SGL41-20 SGL41-30 SGL41-40 SGL41-50 SGL41-60 Polarity color bands (2nd band) voltage type Gray Red Orange Y ellow Green Maximum repetitive peak reverse voltage V RRM 20 30 40 50 60 Volts Maximum RMS voltage V RMS 14 21 28 35 42 Volts Maximum DC blocking voltage V DC 20 30 40 50 60 Volts Maximum average forward rectified current (SEE FIG. 1) I(AV) 1.0 Amp Peak forward surge current 8.3ms single half sine-wave superimposed I FSM 30.0 Amps on rated load (JEDEC Method) Maximum instantaneous forward voltage at 1.0AVF 0.50 0.70 Volts (NOTE 1) Maximum reverse current T A=25°C 0.5 at rated DC blocking voltage(NOTE 1) TA=100°C IR 10 5.0 mA Typical junction capacitance (NOTE 2) C J 110 80.0 pF Maximum thermal resistance (NOTE 4) R Θ JA 75.0 (NOTE 3) R Θ JT 30.0 °C/W Operating junction temperature range T J -55 to +125 -55 to +150 °C Storage temperature range T STG -55 to +150 °C NOTES: (1) Pulse test: 300µs pulse width, 1% duty cycle (2) Measured at 1 MHz and applied reverse voltage of 4.0 Volts (3) Thermal resistance junction to terminal, 0.24 x 0.24” (6.0 x 6.0mm) copper pads to each terminal (4) Thermal resistance junction to ambient, 0.24 x 0.24” (6.0 x 6.0mm) copper pads to each terminal DO-213AB Dimensions in inches and (millimeters)
0 25 50 75 100 125 150 175 0.25 0.50 0.75 1.0 1 100 5.0 0.01 0.1 10.0 0.1 1 10 40 100 100 400 0 20 40 60 80 100 0.001 0.01 0.1 100 RATINGS AND CHARACTERISTIC CURVES BYM13-20 THRU BYM13-60, SGL41-20 THRU SGL41-60 TJ=125°C TJ=150°C FIG. 1 - FORWARD CURRENT DERATING CURVE TERMINAL TEMPERATURE, °C AVERAGE FORWARD CURRENT, AMPERES FIG. 2 - MAXIMUM NON-REPETITIVE PEAK FORWARD SURGE CURRENT NUMBER OF CYCLES AT 60 Hz PEAK FORWARD SURGE CURRENT, AMPERES FIG. 3 - TYPICAL INSTANTANEOUS FORWARD CHARACTERISTICS FIG. 4 - TYPICAL REVERSE CHARACTERISTICS INSTANTANEOUS FORWARD CURRENT, AMPERES INSTANTANEOUS REVERSE CURRENT, MILLIAMPERES INSTANTANEOUS FORWARD VOLTAGE, VOLTS PERCENT OF RATED PEAK REVERSE VOLTAGE, % FIG. 5 - TYPICAL JUNCTION CAPACITANCE JUNCTION CAPACITANCE, pF REVERSE VOLTAGE, VOLTS AT RATED Td 8.3ms SINGLE HALF SINE-WAVE (JEDEC Method) TJ=75°C TJ=25°C TJ=25°C SGL41-20 - SGL41-40 SGL41-50 & SGL41-60 PULSE WIDTH = 300 µs 1% DUTY CYCLE TJ=25°C f=1.0 MHz Vsig=50mVp-p P .C.B. MOUNTED on 0.24 x 0.24” (6.0 x 6.0mm) COPPER LAND AREAS SGL41-20 - SGL41-40 SGL41-50 & SGL41-60 TJ=125°C RESISTIVE OR INDUCTIVE LOAD SGL41-20 - SGL41-40 SGL41-50 & SGL41-60 SGL41-20 -SGL41-40 SGL41-50 & SGL41-60