BYM10-50 GE | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 2

Technical content

SURFACE MOUNT GLASS PASSIVATED JUNCTION RECTIFIER Reverse Voltage -50 to 1600 Volts Forward Current -1.0 Ampere

FEATURES

♦ Plastic package has Underwriters Laboratory Flammability Classification 94V-0 ♦ Capable of meeting environmental standards of MIL-S-19500 ♦ For surface mount applications ♦ High temperature metallurgically bonded construction ♦ Glass passivated cavity-free junction ♦ High temperature soldering guaranteed: 450°C/5 seconds at terminals. Complete device submersible temperature of 265°C for 10 seconds in solder bath MECHANICAL DATA Case: JEDEC DO-213AB molded plastic over glass body Terminals:Plated terminals, solderable per MIL-STD-750, Method 2026 Polarity:Two bands indicate cathode-end -1st band denotes device type and 2nd band denotes repetitive peak reverse voltage rating Mounting Position:Any Weight:0.0046 ounce, 0.116 gram MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Ratings at 25°C ambient temperature unless otherwise specified. BYM10 BYM10 SYMBOLS -50 -100 -200 -400 -600 -800 -1000 UNITS Standard recovery device: 1st band is white GL41A GL41B GL41D GL41G GL41J GL41K GL41M GL41T GL41Y Polarity color bands (2nd Band) Gray Red Orange Y ellow Green Blue Violet White Brown Maximum repetitive peak reverse voltage V RRM 50 100 200 400 600 800 1000 1300 1600 Volts Maximum RMS voltage V RMS 35 70 140 280 420 560 700 910 1120 Volts Maximum DC blocking voltage V DC 50 100 200 400 600 800 1000 1300 1600 Volts Maximum average forward rectified current (SEE FIG. 1) I(AV) 1.0 Amp Peak forward surge current 8.3ms single half sine-wave superimposed on rated load (JEDEC Method) I FSM 30.0 Amps Maximum instantaneous forward voltage at 1.0A VF 1.1 1.2 Volts Maximum DC reverse current T A=25°C 10.0 at rated DC blocking voltage T A=125°C IR 50.0 µA Maximum full load reverse current full cycle average at TA=75°C IR(AV) 30.0 µA Typical junction capacitance (NOTE 1) C J 8.0 pF Typical thermal resistance (NOTE 2) R Θ JA 75.0 (NOTE 3) R Θ JT 30.0 °C/W Operating junction and storage temperature range TJ, TSTG -65 to +175 °C NOTES: (1) Measured at 1.0 MHZ and applied reverse voltage of 4.0 VDC (2) Thermal resistance from junction to ambient, 0.24 x 0.24” (6.0 x 6.0mm) copper pads to each terminal (3) Thermal resistance from junction to terminal, 0.24 x 0.24” (6.0 x 6.0mm) copper pads to each terminal SOLDERABLE ENDS 1st BAND 0.022 (0.56) 0.018 (0.46) 0.205 (5.2) 0.185(4.7) D1= 0.105 0.095 (2.67) (2.41) D2 = D1 + 0 - 0.008 (0.20) 1st band denotes type and positive end (cathode) DO213AB Dimensions in inches and (millimeters) *Glass-plastic encapsulation technique is covered by Patent No. 3,996,602 and brazed-end cap assembly by Patent No. 3,930,306 PATENTED* 2nd band denotes voltage type 2nd BAND

0.25 0.5 0.75 1.0 11 0 1 0 0 5.0 11 0 1 0 0 0.01 0.1 0 2 04 06 08 0 1 0 0 0.01 0.1 0.01 0.1 1 10 100 0.1 100 RATINGS AND CHARACTERISTIC CURVES BYM10-50 THRU BYM10-600 / GL41A THRU GL41Y FIG. 1 - FORWARD CURRENT DERATING CURVE TERMINAL TEMPERATURE, °C AVERAGE FORWARD RECTIFIED CURRENT, AMPERES FIG. 2 - MAXIMUM NON-REPETITIVE PEAK FORWARD SURGE CURRENT NUMBER OF CYCLES AT 60 H Z PEAK FORWARD SURGE CURRENT, AMPERES FIG. 3 - TYPICAL INSTANTANEOUS FORWARD CHARACTERISTICS FIG. 4 - TYPICAL REVERSE CHARACTERISTICS INSTANTANEOUS FORWARD CURRENT, AMPERES INSTANTANEOUS REVERSE CURRENT, MICROAMPERES INSTANTANEOUS FORWARD VOLTAGE, VOLTS FIG. 5 - TYPICAL JUNCTION CAPACITANCE JUNCTION CAPACITANCE, pF REVERSE VOLTAGE, VOLTS TJ=TJ max. 8.3ms SINGLE HALF SINE-WAVE (JEDEC Method) TJ=25°C TJ=25°C PULSE WIDTH=300 µs 1% DUTY CYCLE TJ=25°C f=1.0 MHZ Vsig=50mVp-p 60 HZ RESISTIVE OR INDUCTIVE LOAD TJ=100°C PERCENT OF RATED PEAK REVERSE VOLTAGE, % GL41A THRU GL41M GL41T THRU GL41Y GL41A-J GL41K-Y GL41A - M FIG. 6 - TYPICAL TRANSIENT THERMAL IMPEDANCE TRANSIENT THERMAL IMPEDANCE ( °C/W) t, PULSE DURATION, sec MOUNTED ON 0.20 x 0.27” (5 x 7mm) COPPER PAD AREAS