BTS140A SIEMENS | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 9

Technical content

Features

  • N channel
  • Enhancement mode
  • Temperature sensor with thyristor characteristic
  • The drain pin is electrically shorted to the tab Pin 1 2 3 GDS Type V DS ID R DS(on) Package Ordering Code BTS 140A 50 V 42 A 0.028 Ω TO-220AB C67078-S5011-A2 Maximum Ratings Parameter Symbol Values Unit Drain-source voltage VDS 50 V Drain-gate voltage,RGS = 20 kΩ VDGR 50 Gate-source voltage VGS ± 20 Continuous drain current,TC = 65°C ID 42 A ISO drain current TC = 85° C,VGS = 10 V,VDS = 0.5 V ID-ISO 13.5 Pulsed drain current,TC = 25°C ID puls 168 Short circuit current,Tj = – 55 ... + 150°C ISC 80 Short circuit dissipation,Tj = – 55 ... + 150°C PSCmax 1200 W Power dissipation Ptot 125 Operating and storage temperature range Tj,Tstg – 55 ... + 150 °C DIN humidity category, DIN 40 040 – E – IEC climatic category, DIN IEC 68-1 – 55/150/56 Thermal resistance Chip-case Chip-ambient Rth JC Rth JA ≤ 1.0 ≤ 75 K/W

Electrical Characteristics

at Tj = 25°C, unless otherwise specified. Parameter Symbol Values Unit min. typ. max. Static Characteristics Drain-source breakdown voltage VGS = 0, ID = 0.25 mA V(BR)DSS 50 – – V Gate threshold voltage VGS =VDS , ID = 1 mA VGS(th) 2.5 3.0 3.5 Zero gate voltage drain current VGS = 0 V,VDS = 50 V Tj = 25°C Tj = 125°C IDSS 0.1 1.0 100 µA Gate-source leakage current VGS =± 20 V,VDS = 0 Tj = 25°C Tj = 150°C IGSS 2.0 100 4.0 nA µA Drain-source on-state resistance VGS = 10 V, ID =32 A RDS(on) – 0.024 0.028 Ω Dynamic Characteristics Forward transconductance VDS ≥ 2× ID × RDS(on)max,ID = 32 A gfs 12 26 – S Input capacitance VGS = 0, VDS = 25 V,f = 1 MHz C iss – 1800 2400 pF Output capacitance VGS = 0, VDS = 25 V,f = 1 MHz C oss – 800 1200 Reverse transfer capacitance VGS = 0, VDS = 25 V,f = 1 MHz C rss – 280 450 Turn-on timeton, (ton =td(on) +tr) VCC = 25 V,VGS = 10 V,ID = 3 A,RGS = 50Ω td(on) –3 5 5 0 n s tr – 85 130 Turn-off timetoff, (toff =td(off) +tf) VCC = 25 V,VGS = 10 V,ID = 3 A,RGS = 50Ω td(off) – 220 280 tf – 140 180 BTS 140A

Electrical Characteristics (cont’d) at Tj = 25°C, unless otherwise specified. Parameter Symbol Values Unit min. typ. max. Reverse Diode Continuous source current IS – – 42 A Pulsed source current ISM – – 168 Diode forward on-voltage IF = 84 A,VGS = 0 VSD – 1.8 2.2 V Reverse recovery time I F = IS, diF/dt = 100 A/µs,VR = 30 V t rr –8 0 – ns Reverse recovery charge IF = I S, diF/dt = 100 A/µs,VR = 30 V Q rr – 0.14 – µC Temperature Sensor Forward voltage ITS(on) = 10 mA,Tj = – 55 ... + 150°C Sensor override,tp ≤ 100µs VTS(on) 1.4 1.50 V Forward current Sensor override,tp ≤ 100µs ITS(on) 600 mA Holding current,VTS(off) = 5 V, Tj = 25°C Tj = 150°C IH 0.05 0.05 0.1 0.2 0.5 0.3 Switching temperature VTS = 5 V TTS(on) 150 – – Turn-off time VTS = 5 V,ITS(on) = 2 mA toff 0.5 – 2.5 µs BTS 140A

Examples for short-circuit protection atTj = – 55 ... + 150°C, unless otherwise specified. Parameter Symbol Examples Unit 12 – Drain-source voltage VDS 15 30 – V Gate-source voltage VGS 6.2 5.0 – Short-circuit current ISC ≤ 80 ≤ 40 – A Short-circuit dissipation PSC ≤ 1200 ≤ 1200 – W Response time Tj = 25°C, before short circuit tSC(off) ≤ 20 ≤ 25 – ms BTS 140A Short-circuit protectionISC =f (VDS ) Parameter:V GS Diagram to determineISC forTj= – 55 ... +150°C Max. gate voltageVGS(SC) =f (VDS ) Parameter:Tj= – 55 ... + 150°C

Max. power dissipationPtot =f (TC ) Typical output characteristicsID =f (VDS ) Parameter:tp =8 0µs Typ. drain-source on-state resistance RDS(on) =f (ID ) Parameter:V GS Safe operating areaID =f (VDS ) Parameter:D = 0.01,TC =2 5°C BTS 140A

Drain-source on-state resistance RDS(on) =f (Tj) Parameter:ID = 32 A,VGS = 10 V (spread) Typ. transfer characteristic ID =f (VGS ) Parameter:tp = 80µs,VDS = 25 V Gate threshold voltageVGS(th) =f (Tj) Parameter:V DS =VGS ,ID = 1 mA Typ. transconductancegfs =f (ID ) Parameter:tp = 80µs,VDS = 25 V BTS 140A

Continuous drain currentID = f (TC ) Parameter:VGS ≥ 10 V Typ. gate-source leakage current IGSS = f (TC ) Parameter:VGS = 20 V,VDS = 0 Forward characteristics of reverse diode IF =f (VSD ) Parameter:T j,tp = 80µs (spread) Typ. capacitancesC =f (VDS ) Parameter:VGS = 0,f= 1 MHz BTS 140A

Transient thermal impedanceZthJC =f (tp) Parameter:D =tp/T BTS 140A

3.79.5 9.9 4.6 0.75 1.05 2.542.54 17.5 2.8 12.8 0.5 2.4 13.5 9.2 15.6 1.3 4.4 GPT05155 3) max. 14.5 by dip tinning press burr max. 0.05 2) dip tinning 1) punch direction, burr max. 0.04 2) 1