BTS121A SIEMENS | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 9

Technical content

Features

  • N channel
  • Logic level
  • Enhancement mode
  • Temperature sensor with thyristor characteristic
  • The drain pin is electrically shorted to the tab Pin 1 2 3 GDS Type V DS ID R DS(on) Package Ordering Code BTS 121A 100 V 22 A 0.1 Ω TO-220AB C67078-S5010-A2 Maximum Ratings Parameter Symbol Values Unit Drain-source voltage VDS 100 V Drain-gate voltage,RGS = 20 kΩ VDGR 100 Gate-source voltage VGS ± 10 Continuous drain current,TC = 25°C ID 22 A ISO drain current TC = 85°C, VDS = 10 V,VDS = 0.5 V ID-ISO 3.5 Pulsed drain current,TC = 25°C ID puls 88 Short circuit current,Tj = – 55 ... + 150°C ISC 68 Short circuit dissipation,Tj = – 55 ... + 150°C VDS ≤ 50 V /VDS ≤ 15 V PSCmax W Power dissipation Ptot 95 Operating and storage temperature range Tj,Tstg – 55 ... + 150 °C DIN humidity category, DIN 40 040 – E – IEC climatic category, DIN IEC 68-1 – 55/150/56 Thermal resistance Chip-case Chip-ambient Rth JC Rth JA ≤ 1.32 ≤ 75 K/W

Electrical Characteristics

at Tj = 25 ˚C, unless otherwise specified. Parameter Symbol Values Unit min. typ. max. Static Characteristics Drain-source breakdown voltage VGS = 0, ID = 0.25 mA V(BR)DSS 100 – – V Gate threshold voltage VGS =VDS , ID = 1 mA VGS(th) 1.5 2.0 2.5 Zero gate voltage drain current VGS = 0 V,VDS = 100 Tj = 25°C Tj = 125°C IDSS 0.1 1.0 100 µA Gate-source leakage current VGS =± 20 V,VDS = 0 Tj = 25°C Tj = 150°C IGSS 100 nA µA Drain-source on-state resistance VGS = 4.5 V, ID = 9.5 A RDS(on) – 0.085 0.1 Ω Dynamic Characteristics Forward transconductance VDS ≥ 2× ID × RDS(on)max,ID = 9.5 A gfs 81 4 – S Input capacitance VGS = 0, VDS = 25 V,f = 1 MHz C iss – 1200 1500 pF Output capacitance VGS = 0, VDS = 25 V,f = 1 MHz C oss – 320 580 Reverse transfer capacitance VGS = 0, VDS = 25 V,f = 1 MHz C rss – 160 260 Turn-on timeton, (ton =td(on) +tr) VCC = 30 V,VGS = 5 V,ID = 3 A,RGS = 50Ω td(on) –2 5 4 0 n s tr – 110 170 Turn-off timetoff, (toff =td(off) +tf) VCC = 30 V,VGS = 5 V,ID = 3 A,RGS = 50Ω td(off) – 210 270 tf – 100 130 BTS 121A

Electrical Characteristics (cont’d) at Tj = 25°CC, unless otherwise specified. Parameter Symbol Values Unit min. typ. max. Reverse Diode Continuous source current IS – – 19 A Pulsed source current ISM ––7 6 Diode forward on-voltage IF = 38 A,VGS = 0 VSD – 1.35 1.7 V Reverse recovery time IF = IS, diF/dt = 100 A/µs,VR = 30 V t rr – 150 – ns Reverse recovery charge IF = IS, diF/dt = 100 A/µs,VR = 30 V Q rr – 0.58 – µC Temperature Sensor Forward voltage ITS(on) = 5 mA,Tj = – 55 ... + 150°C Sensor override,tp ≤ 100µs VTS(on) 1.3 1.4 V Forward current Sensor override,tp ≤ 100µs ITS(on) 5.0 600 mA Holding current,VTS(off) = 5 V, Tj = 25°C Tj = 150°C IH 0.05 0.05 0.1 0.2 0.5 0.3 Switching temperature VTS = 5 V TTS(on) 150 – – Turn-off time VTS = 5 V,ITS(on) = 2 mA toff 0.5 – 2.5 µs BTS 121A

Examples for short-circuit protection atTj = – 55 ... + 150°C, unless otherwise specified. Parameter Symbol Examples Unit 12 – Drain-source voltage VDS 15 30 – V Gate-source voltage VGS 5.5 4.0 – Short-circuit current ISC 66.7 26.7 – A Short-circuit dissipation PSC 1000 800 – W Response time Tj = 25°C, before short circuit tSC(off) ≤ 25 ≤ 25 – ms BTS 121A Short-circuit protectionISC =f (VDS ) Parameter:V GS DiagramtodetermineISC forTj=–55...+150˚C Max. gate voltageVGS(SC) =f (VDS ) Parameter:Tj= – 55 ... + 150°C

Max. power dissipationPtot =f (TC ) Typical output characteristicsID =f (VDS ) Parameter:tp =8 0µs Typ. drain-source on-state resistance RDS(on) =f (ID ) Parameter:V GS Safe operating areaID =f (VDS ) Parameter:D = 0.01,TC =2 5°C BTS 121A

Drain-source on-state resistance RDS(on) =f (Tj) Parameter:ID = 4.5 A,VGS = 9.5 V Typ. transfer characteristic ID =f (VGS ) Parameter:tp = 80µs,VDS = 25 V Gate threshold voltageVGS(th) =f (Tj) Parameter:V DS =VGS ,ID = 1 mA (spread) Typ. transconductancegfs =f (ID ) Parameter:tp = 80µs,VDS = 25 V BTS 121A

Continuous drain currentID = f (TC ) Parameter:VGS ≥ 10 V Typ. gate-source leakage current IGSS = f (TC ) Parameter:VGS = 20 V,VDS = 0 Forward characteristics of reverse diode IF =f (VSD ) Parameter:T j,tp = 80µs (spread) Typ. capacitancesC =f (VDS ) Parameter:VGS = 0,f= 1 MHz BTS 121A

Transient thermal impedanceZthJC =f (tp) Parameter:D =tp/T BTS 121A

SMD Version E 3045 C67078-S5010-A5 3.79.5 9.9 4.6 0.75 1.05 2.542.54 17.5 2.8 12.8 0.5 2.4 13.5 9.2 15.6 1.3 4.4 GPT05155 3) max. 14.5 by dip tinning press burr max. 0.05 2) dip tinning 1) punch direction, burr max. 0.04 2) 1