BTM901X INFINEON | Alldatasheet
Document overview
- Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
- PDF pages: 7
Technical content
Features
- Path resistance of typ. 175 m Ω at 25°C
- Pulse current: - 5.2 A for t pulse ≤ 1 s at 85°C - 4.2 A for t pulse ≤ 10 s at 85°C
- Supply voltage range from 7 V to 18 V
- Extended supply voltage range from 4.5 V to 40 V
- Current limitation of min. 10 A
- Slew rate selection
- Protection and diagnostics: overcurrent, undervoltage, overtemperature, open load detection, current sense, cross current protection
- Status flag diagnosis with feedback of current sense
- SPI interface in BTM9011
- Half-bridge mode
- Green product (RoHS compliant) Potential applications
- Automotive unidirectional and bidirectional brushed DC motors
- Door modules
- Mirror modules
- Body control modules
- Other inductive or resistive loads in the automotive field Product validation
- Qualified for automotive applications
- Product validation according to AEC-Q100
Description
The BTM9010/BTM9011 is an integrated H-bridge for automotive motor drive applications. This monolithic device is implemented in BCD technology, and assembled in PG-TSDSO-14 which has an exposed pad to ensure better thermal performance. The device provides intelligent protection features against overtemperature, undervoltage, overcurrent, short circuit and crosscurrent. Moreover, the device also provides current sense and open load diagnostic as diagnosis features. The information of the output current and the error flag is presented at IS pin. BTM901x Product brief Please read the sections "Important notice" and "Warnings" at the end of this document 1.0 2024-06-04 Product brief www.infineon.com
M OUT A OUTB μC BTM9010 SDI1 BTM9011 SCLK SDO1 CS SDI2 BTM9011 SCLK SDO2 CS SDI3 BTM9011 SCLK SDO3 μC SDISDI SDOSDO CSCS SCLKSCLK CS VDDIOVDDIO VDD_EXT Device 1 Device 2 Device 3 M M M Type Package Marking BTM9010 PG-TSDSO-14 BTM9010 BTM9011 PG-TSDSO-14 BTM9011 BTM901x Product brief 2 1.0 2024-06-04 Product brief
3 1.0 2024-06-04 Product brief
1 Absolute maximum ratings
Stress above the absolute maximum ratings listed in this chapter may cause permanent damage to the device. Exposure to absolute maximum rating conditions for extended periods may affect device reliability. Table 1 Absolute maximum rating Tj = -40°C to 150°C; all voltages with respect to ground, positive current flowing into pin (unless otherwise specified) Parameter Symbol Values Unit Note or condition P-Number Min. Typ. Max. Voltages Supply voltage VS -0.3 – 40 V – P_GPC_01_1 Output voltage VOUTX -0.3 – VS + 0.3 V – P_GPC_01_02 Voltage of logic pins VINA / VSDI, VINB / VSCKL, VSEL / VCS, VPWM / VSDO Current sense pin VIS -0.3 – 40 V – P_GPC_01_15 Voltage between VS and IS pin VSIS -0.3 – 40 V – P_GPC_01_04 Temperatures Junction temperature Tj -40 – 150 °C – P_GPC_01_09 Storage Temperature Tstg -55 – 150 °C – P_GPC_01_10 ESD susceptibility ESD susceptibility all pins (HBM) VESD(HBM, local) -2 – 2 kV HBM1) P_GPC_01_11 ESD susceptibility OUT vs GND, VS vs GND (HBM) VESD(HBM, global) -4 – 4 kV HBM1) P_GPC_01_12 ESD susceptibility all pins (CDM) VESD(CDM) -500 – 500 V CDM2) P_GPC_01_13 ESD susceptibility corner pins (CDM) VESD(CDM, corner) -750 – 750 V CDM2) P_GPC_01_14 1) ESD susceptibility, human body model (HBM), according to AEC Q100-002 (1.5 kΩ, 100 pF). 2) ESD susceptibility, charged device model (CDM), according to AEC Q100-011. BTM901x Product brief 4 1.0 2024-06-04 Product brief
2 Package
5 1.0 2024-06-04 Product brief
Revision history
1.0 2024-06-04 Initial release BTM901x Product brief 6 1.0 2024-06-04 Product brief
All referenced product or service names and trademarks are the property of their respective owners. Edition 2024-06-04 Published by Infineon Technologies AG
81726 Munich, Germany
© 2024 Infineon Technologies AG All Rights Reserved. Do you have a question about any aspect of this document? Email: erratum@infineon.com Document reference IFX-fgl1716790833794 Important notice The information given in this document shall in no event be regarded as a guarantee of conditions or characteristics (“Beschaffenheitsgarantie”). With respect to any examples, hints or any typical values stated herein and/or any information regarding the application of the product, Infineon Technologies hereby disclaims any and all warranties and liabilities of any kind, including without limitation warranties of non-infringement of intellectual property rights of any third party. In addition, any information given in this document is subject to customer’s compliance with its obligations stated in this document and any applicable legal requirements, norms and standards concerning customer’s products and any use of the product of Infineon Technologies in customer’s applications. The data contained in this document is exclusively intended for technically trained staff. It is the responsibility of customer’s technical departments to evaluate the suitability of the product for the intended application and the completeness of the product information given in this document with respect to such application. Warnings Due to technical requirements products may contain dangerous substances. For information on the types in question please contact your nearest Infineon Technologies office. Except as otherwise explicitly approved by Infineon Technologies in a written document signed by authorized representatives of Infineon Technologies, Infineon Technologies’ products may not be used in any applications where a failure of the product or any consequences of the use thereof can reasonably be expected to result in personal injury.