BSDX0025D4D

BSDX0811BARO SENSORTECHNICS | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 5

Technical content

Signal conditioned high precision pressure transducers 1/5February 2009 / 631 www.sensortechnics.com

FEATURES

barometric range 800...1100 mbar

• Absolute, gage or differential pressure
• 0.5 to 4.5 V ratiometric output
• Precision ASIC conditioning
• Temperature compensated
• Total accuracy ±0.5 to ±1.0 %FSS SPECIFICATIONS ELECTRICAL CONNECTION Maximum ratings Supply voltage VS 4.75 V to 5.25 VDC max. 6.50 VDC Output current Sink 2 mA Source 2 mA Lead temperature (2 - 4 sec.) 250°C Temperature ranges Compensated 0 to +85 °C Operating -20 to +105 °C Storage -40 to +125 °C Vibration 10 g at 20 - 2000 Hz Shock 100 g for 11 ms Caution!The sensor is not reverse polarity protected. Incorrect applications of excitation voltage or ground to the wrong pin can cause electrical failure. Application of supply voltage above the maximum can cause electrical failure. BSDX 15 nF 220 nF 5 6 7 8 4 +Vs Vout GND3 N/C N/C Note: Capacitor 220 nF required between +Vs and GND and 15 nF between Vout and GND. It is important to place the capacitors as close to the pins as possible! Pins 4, 5, 6, 7 and 8 are internal device connections and should not be connected for any reason!

Signal conditioned high precision pressure transducers 2/5February 2009 / 631 www.sensortechnics.com PRESSURE RANGES SPECIFICATIONS (VS = 5.0 VDC , TA = 25°C) traPr ebmune gnarerusserPt sruBe russerp 1 ).pyt(ytivitisneS ORAB1180XDSB0 011ot008) a(rabm2 rab )a( 3.31 rab/V R2A0001XDSB1 ot0 rab )a( 20 .4 R2A0002XDSB2 ot04 2 R2A0005XDSB5 ot00 18 .0 R4D5200XDSB5 2ot0 rabm )d,g( 2.0 rab )d,g( 061 R4D/R2G0500XDSB0 5ot05 3.00 8 R4D/R2G0010XDSB0 01ot05 3.00 4 R4D/R2G0520XDSB0 52ot01 6 1 R4D/R2G0050XDSB0 05ot01 8 R4D/R2G0001XDSB1 ot0 rab )d,g( R4D/R2G0002XDSB2 ot04 2 R4D/R2G0005XDSB5 ot00 18 .0 D4D0100XDSB0 1±ot0 rabm )d( 2.0 rab )d( 002 D4D5200XDSB5 2±ot02 .00 8 D4D0500XDSB0 5±ot05 3.00 4 D4D0010XDSB0 01±ot05 3.00 2 D4D0520XDSB0 52±ot01 8 D4D0050XDSB0 05±ot01 4 D4D0001XDSB1 ±ot0) d(rab2 2 Specification notes: 1. If maximum burst pressure is exceeded, even momentarily, the package may leak or burst, or the pressure sensing die may fracture. 2. Full Scale Span (FSS) is the algebraic difference between the output signal for the highest and lowest specified pressure. Span is ratiometric to the supply voltage. 3. Total accuracy is the combined error from offset and span calibration, linearity, pressure hysteresis, and temperature effects. Linearity is the measured deviation based on a straight line. Hysteresis is the maximum output difference at any point within the operating pressure range for increasing and decreasing pressure. Calibration errors include the deviation of offset and full scale from nominal values. 4. Delay time between sampling and signal change at the output. 5. The smallest change in the output voltage, given any change in pressure.

Signal conditioned high precision pressure transducers 3/5February 2009 / 631 www.sensortechnics.com PERFORMANCE CHARACTERISTICS 0.5 to 4.5 ratiometric output (VS = 5.0 VDC , TA = 25°C) All BSDX...R and BSDX0811BARO All BSDX...D4D scitsiretcarahC. niM. pyT. xaMs tinU erusserpdeificepstsewoltatesffO. ..5200XDSB ...0500XDSB ORAB1180XDSB 64.00 5.04 5.0 V srehtolla8 4.00 5.02 5.0 )SSF(napselacslluF 2 00.4 tuptuoelacslluF. ..5200XDSB ...0500XDSB ORAB1180XDSB 64.40 5.44 5.4 srehtolla8 4.40 5.42 5.4 )C°58ot0(ycaruccalatoT 3 ...5200XDSB ...0500XDSB ORAB1180XDSB 0.1± SSF% srehtolla5 .0± etarelpmaS0 01z H yaledesnopseR 4 37.21 1.41s m petsnoitazitnauQ 5 ORAB1180XDSB5 Vmsrehtolla2 noitpmusnoctnerruC 6A m scitsiretcarahC. niM. pyT. xaMs tinU tesffoerusserporeZ. ..0100XDSB ...5200XDSB ...0500XDSB 64.20 5.24 5.2 V srehtolla8 4.20 5.22 5.2 )SSF(napselacslluF 2 00.4 tuptuOe russerpdeificeps.xamta. ..0100XDSB ...5200XDSB ...0500XDSB 64.40 5.44 5.4 srehtolla8 4.40 5.42 5.4 erusserpdeificeps.nimta. ..0100XDSB ...5200XDSB ...0500XDSB 64.00 5.04 5.0 srehtolla8 4.00 5.02 5.0 )C°58ot0(ycaruccalatoT 3 ...0100XDSB ...5200XDSB ...0500XDSB 0.1± SSF% srehtolla5 .0± etarelpmaS0 01z H yaledesnopseR 4 37.21 1.41s m petsnoitazitnauQ 5 2V m noitpmusnoctnerruC 6A m

Signal conditioned high precision pressure transducers 4/5February 2009 / 631 www.sensortechnics.com PHYSICAL DIMENSIONS D4 package G2 package A2 package third angle projection dimensions in mm (inches) 16.89 (0.665) 1.27 typ (0.050 typ) 13.97 (0.550) 16.64 ±0.64 (0.655 ±0.025) 8.89 (0.350) 7.87 typ (0.310 typ) 4.5 (0.177) 2.54 typ (0.100 typ) 8.26 typ (.325 typ) 1.78 (0.070) 3.63 (0.143) 3.38 (0.133) 8.13 (0.320) 0.51 typ (0.02 typ) Low pressure port High pressure port 2.29 (0.090) 4.5 (0.177) 16.64 ±0.64 (0.655 ±0.025) 16.89 (0.665)1.27 typ (0.050 typ) 13.97 (0.550) 8.89 (0.350) 8.0 typ (0.315 typ) 2.29 typ (0.090 typ) 8.46 (0.333) 2.54 typ (0.100 typ) 0.51 typ (0.02 typ) 2 ° typ 16.89 (0.665) 1.27 typ (0.050 typ) 13.97 (0.550) 3.15 (0.124) 4.9 (0.193) 16.64 ±0.64 (0.655 ± 0.025) 8.89 (0.350)5.08 (0.200) 2.29 typ (0.090 typ) 4.5 (0.177) 2.54 typ (0.100 typ) 0.51 typ (0.02 typ) 6.99 (0.275) 1.19 typ (0.047 typ) 2.79 typ (0.11 typ)

Signal conditioned high precision pressure transducers 5/5February 2009 / 631 www.sensortechnics.com Sensortechnics reserves the right to make changes to any products herein. Sensortechnics does not assume any liability arising out of the application or use of any product or circuit described herein, neither does it convey any license under its patent rights nor the rights of others.

ORDERING INFORMATION

egnarerusserPe tulosbAe gaGe gaG/laitnereffiD rabm52ot0- R 4D5200XDSB rabm05ot0R 2G0500XDSBR 4D0500XDSB rabm001ot0R 2G0010XDSBR 4D0010XDSB rabm052ot0R 2G0520XDSBR 4D0520XDSB rabm005ot0R 2G0050XDSBR 4D0050XDSB rabm0011ot008O RAB1180XDSB- - rab1ot0R 2A0001XDSBR 2G0001XDSBR 4D0001XDSB rab2ot0R 2A0002XDSBR 2G0002XDSBR 4D0002XDSB rab5ot0R 2A0005XDSBR 2G0005XDSBR 4D0005XDSB rabm01±ot0 D4D0100XDSB rabm52±ot0 D4D5200XDSB rabm05±ot0 D4D0500XDSB rabm001±ot0 D4D0010XDSB rabm052±ot0 D4D0520XDSB rabm005±ot0 D4D0050XDSB rab1±ot0 D4D0001XDSB ELECTRICAL CONNECTIONS BSDX...A2R, BSDX...BARO Other pressure ranges or calibrations are available on request Note: Pins 4, 5, 6, 7 and 8 are internal device connections and should not be connected for any reason! Vs (pin 1) identifier Vs (pin 1) identifier Vs (pin 1) identifier N/C N/C N/C N/C N/C N/C N/C N/C N/C N/C N/C N/C +Vs Vout GND N/C +Vs Vout GND N/C +Vs Vout GND N/C