BM14C ZEMIC | Alldatasheet

Document overview

  • Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
  • PDF pages: 4

Technical content

Specifications and dimensions are subject to change without notice and do not constitute any liability whatsoever. Zemic Europe B.V. T: +31 76 50 39480 Nr. 2024.01 BM14C Rev8 info@zemic.nl Page 1/4 www.zemiceurope.com Short Description

  • Stainless steel IP68 Compression load cell Test Certificate no. D09-07.03 Revision 1
  • Hermetically sealed
  • Suitable for vehicle and hopper scales and vehicle testing facilities
  • Built-in surge arrestors
  • High accuracy
  • Current calibrated (SC-option) Available Models Capacity Accuracy Full Article Description 0.5t C3 Excluded from OIML BM14C-C3-0.5t-15B-SC 1t C3 Excluded from OIML BM14C-C3-1t-15B-SC 2t C3 Excluded from OIML BM14C-C3-2t-15B-SC 3t C3 Excluded from OIML BM14C-C3-3t-15B-SC 5t C3 Excluded from OIML BM14C-C3-5t-15B-SC 10t C3/C4 BM14C-C3/C4-10t-15B-SC 20t C3/C4 BM14C-C3/C4-20t-15B-SC 25t C3/C4 BM14C-C3/C4-25t-15B-SC 30t C3/C4 BM14C-C3/C4-30t-15B-SC 40t C3/C4 BM14C-C3/C4-40t-15B-SC 50t C3/C4 BM14C-C3/C4-50t-15B-SC

Specifications and dimensions are subject to change without notice and do not constitute any liability whatsoever. Zemic Europe B.V. T: +31 76 50 39480 Nr. 2024.01 BM14C Rev8 info@zemic.nl Page 2/4 www.zemiceurope.com Technical Specifications BM14C Accuracy Class C3 OIML R60 C3 OIML R60 C4 Output Sensitivity ( = FS ) mV/V 2.0 ± 0.002 Maximum Capacity ( Emax ) t 0.5, 1, 2, 3, 5 10, 20, 25, 30, 40, 50 Max. Number of Load Cell Intervals nLC 3000 4000 Ratio of min. LC Verification Interval Y = Emax / vmin 10000 15000 Combined Error %FS ≤± 0.023 ≤± 0.0174 Creep Error (30 minutes) %FS ≤± 0.016 ≤± 0.012 Temperature Effect on Zero (ZTC) %FS/10°C ≤± 0.015 ≤± 0.010 Temperature Effect on Sensitivity (STC) %FS/10°C ≤± 0.011 ≤± 0.009 Zero Balance %FS ≤ ± 1.0 Safe Overload %FS 150 Ultimate Overload %FS 300 Excitation, Recommended Voltage V 5 ~ 12 Excitation, Maximum Voltage V 18 Input Resistance Ω 700 ± 7 Output Resistance Ω 703 ± 4 Insulation Resistance (50V) MΩ ≥5000 Compensated Temperature °C -10 ~ +40 Operating Temperature °C -35 ~ +65 Storage Temperature °C -40 ~ +70 Package Weight kg 0.5t – 5t: 2.4 10t – 25t: 2.9 30t – 50t: 3.4 Element Material Stainless steel Ingress Protection (acc. to EN 60529) IP68 ATEX Classification (optional) II 1G Ex ia IIC T4 Ga II 1D Ex ia IIIC T 200 135°C Da II 3G Ex ic IIC T4 Gc Wiring Features: Cable type: Shielded, 4 conductor cable, conductor AWG 22 Cable diameter: Ø 5mm Cable length: 15m for C3 / 18m for C4 above 30t Cable jacket: Polyurethane Shield not connected to element 4-Wire Connection Diagram Excitation (+) Signal (-) Excitation (-) Signal (+) Shield Red White Black Green Transparent

Specifications and dimensions are subject to change without notice and do not constitute any liability whatsoever. Zemic Europe B.V. T: +31 76 50 39480 Nr. 2024.01 BM14C Rev8 info@zemic.nl Page 3/4 www.zemiceurope.com Dimensions in mm Front View Side View Bottom View Isometric View Dimension Capacity ØD L SR1 SR2 H H1 0.5 – 5t 40 20 25 150 14 31.5 10 – 30t 40 20 37.5 150 14 31.5 40 – 50t 50 25 200 200 22 24.5

Specifications and dimensions are subject to change without notice and do not constitute any liability whatsoever. Zemic Europe B.V. T: +31 76 50 39480 Nr. 2024.01 BM14C Rev8 info@zemic.nl Page 4/4 www.zemiceurope.com Available Accessories BM-14-414 0.5 – 50t Mount

  • Stainless steel mount
  • Easy load cell access
  • Lift-off protection
  • Controlled horizontal movement
  • Rocker support included with mount delivery BM-14-910 0.5t – 30t Mounting Set
  • Complete mounting set with LC dummy
  • Stainless steel
  • Easy installation due to transport plate
  • Self-aligning construction
  • Lift-off protection
  • Optional stay-rod available BY-14-103 10 – 50t Rocker Support Set
  • Easy installation
  • Good self-aligning ability
  • Stainless steel
  • Anti-reversal ability
  • Can be used under hazardous environments
  • Also available in alloy steel version (part: HY-14-104-10-30t) HM-14-403 10 – 50t Support Plates
  • Compact construction
  • Easy installation
  • Self-aligning construction
  • Nickel plated alloy steel
  • To be used with BY-14-103 & HY-14-104 Rocker Support sets HM-14-434 10 – 50t Tank Mount
  • Nickel plated alloy steel
  • Easy load cell access
  • Lift-off protection
  • Controlled horizontal movement HM-14-911 0.5t – 30t Mounting Set
  • Complete mounting set with LC dummy
  • Nickel plated alloy steel
  • Easy installation due to transport plate
  • Self-aligning construction
  • Optional stay-rod available
  • Lift-off protection M 1 1 20 20 2 0 150 1 5 225 150 209 199 169 5 1 11 5 1 10 10 20 20 2 0 150 1 5 225 150 209 199