DATASHEET SEARCH SITE | WWW.ALLDATASHEET.COM
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 16
Technical content
1.1 General description
the frequency range from HF to 2 GHz.
1.2 Features and benefits
1.3 Applications
Table 1. Typical performance
Table 2. Pinning Table 3. Ordering information Table 4. Limiting values In accordance with the Absolute Maximum Rating System (IEC 60134).
Table 5. Thermal characteristics
6.0 K/W
Table 6. DC characteristics Tj = 25 C; unless otherwise specified. Table 7. RF characteristics Table 8. AC characteristics Tj =2 5 C; unless otherwise specified.
Product data sheet Rev. 3 — 8 July 2021 4 of 16 BLP15H9S10; BLP15H9S10G Power LDMOS transistor 7. Test information
7.1 Ruggedness in class-AB operation
The BLP15H9S10 and BLP15H9S10G are capable of withstanding a load mismatch corresponding to VSWR = 30 : 1 through all phases under the following conditions: VDS =5 5V ; IDq =5m A ; PL = 13 W; f = 1400 MHz; pulsed CW (tp = 100 s; =2 0% ) . VGS = 0 V; f = 1 MHz. Fig 1. Output capacitance as a function of drain-source voltage; typical values per section amp01445 0 10 20 30 40 50 60 70 VDS (V) CossossCoss (pF)(pF)(pF)
7.2 Test circuit
[1] American Technical Ceramics type 800A or capacitor of same quality. Printed-Circuit Board (PCB): Rogers RO4350; thickness = 0.762 mm. See Table 9 for a list of components. Table 9. List of components For test circuit see Figure 2.
Product data sheet Rev. 3 — 8 July 2021 6 of 16 BLP15H9S10; BLP15H9S10G Power LDMOS transistor
7.3 Graphical data
7.3.1 Pulsed CW performance measured in production RF test circuit
VDS =5 0V ; IDq = 5 mA; f = 1400 MHz; tp = 100 s; =2 0% . VDS =5 0V ; IDq = 5 mA; f = 1400 MHz; tp = 100 s; =2 0% . (1) P L(1dB) = 40.4 dBm (10.8 W) (2) P L(3dB) = 40.9 dBm (12.2 W) Fig 3. Power gain and drain efficiency as function of output power; typical values Fig 4. Output power as a function of input power; typical values amp01447 0 2 4 6 8 10 12 14 16 0 18 20 20 40 22 60 24 80 PL (W) GpGp (dB)(dB)(dB) ηDηD (%)(%)(%) GpGp ηDηD
Product data sheet Rev. 3 — 8 July 2021 7 of 16 BLP15H9S10; BLP15H9S10G Power LDMOS transistor VDS = 50 V; f = 1400 MHz; tp = 100 s; =2 0% . (1) I Dq = 2 mA (2) I Dq = 5 mA (3) I Dq = 10 mA (4) I Dq = 20 mA (5) I Dq = 30 mA (6) I Dq =4 0m A (7) I Dq = 50 mA VDS =5 0V ; f=1 4 0 0M H z ; tp = 100 s; =2 0% . (1) I Dq = 2 mA (2) I Dq = 5 mA (3) I Dq = 10 mA (4) I Dq = 20 mA (5) I Dq = 30 mA (6) I Dq =4 0m A (7) I Dq = 50 mA Fig 5. Power gain as a function of output power; typical values Fig 6. Drain efficiency as a function of output power; typical values amp01449 0 2 4 6 8 10 12 14 PL (W) GpGp (dB)(dB)(dB) (7)(7)(7) (6)(6)(6) (5)(5)(5) (4)(4)(4) (3)(3)(3) (2)(2)(2) (1)(1)(1) amp01450 0 2 4 6 8 10 12 14 PL (W) ηDηD (%)(%)(%) (1)(1)(1) (2)(2)(2) (3)(3)(3) (4)(4)(4) (5)(5)(5) (6)(6)(6) (7)(7)(7)
Product data sheet Rev. 3 — 8 July 2021 8 of 16 BLP15H9S10; BLP15H9S10G Power LDMOS transistor IDq = 5 mA; f = 1400 MHz; tp = 100 s; =2 0% . (1) V DS = 50 V (2) V DS = 45 V (3) V DS = 40 V (4) V DS = 35 V (5) V DS = 30 V (6) V DS = 25 V IDq = 5 mA; f = 1400 MHz; tp = 100 s; =2 0% . (1) V DS = 50 V (2) V DS = 45 V (3) V DS = 40 V (4) V DS = 35 V (5) V DS = 30 V (6) V DS = 25 V Fig 7. Power gain as a function of output power; typical values Fig 8. Drain efficiency as a function of output power; typical values amp01451 0 2 4 6 8 10 12 14 PL (W) GpGp (dB)(dB)(dB) (1)(1)(1) (2)(2)(2)(3)(3)(3) (4)(4)(4) (5)(5)(5) (6)(6)(6) amp01452 0 2 4 6 8 10 12 14 PL (W) ηDηD (5)(5)(5) (6)(6)(6)
Product data sheet Rev. 3 — 8 July 2021 9 of 16 BLP15H9S10; BLP15H9S10G Power LDMOS transistor 8. Package outline Fig 9. Package outline SOT1482-1 (sheet 1 of 2) SOT1482-1 Package outline drawing: Revision: Sheet 1 of 2 Revision date: 1/4/2017 Tolerances unless otherwise stated: Dimension: B 0.05 Angle: B 1° Third angle projectionSOT1482-1 units in mm. Exposed Heatsink Flash/bleed allowed hatched area (2x) 4.95 (#2) L0.25 A 1.78B 0.1 (#4) 11.16B 0.1 PIN 1 10.67 B0.1 (#4) 0.24 B 0.025 1.04 3.8 m in. 4.5 m ax. 7.4 min. 8.7 max. Compound allowed 0.2() 1.2 1() 0.5 B0.1 1.57 9.65 (#1)A 2.03 6.1 (#1) 5.92 L0.2 B B
Product data sheet Rev. 3 — 8 July 2021 10 of 16 BLP15H9S10; BLP15H9S10G Power LDMOS transistor Fig 10. Package outline SOT1482-1 (sheet 2 of 2) DETAIL B SCALE 50 : 1 B SOT1482-1 Package outline drawing: Revision: Sheet 2 of 2 Revision date: 1/4/2017 Tolerances unless otherwise stated: Dimension: B 0.05 Angle: B 1° Third angle projectionSOT1482-1 units in mm. Drawing Notes Items Description (1) Dimensions are excluding mold protrusion. The mold protrusion is maximum 0.15 mm per side. See also detail B. (2) The lead dambar (metal) protrusions are not included. Add 0.14 mm max to the total lead dimension at the dambar location. (3) The leads and exposed heatsink ar e plated with matte Tin (Sn). (4) Dimensions (Heatsink ears) 10,67 and 1,78 do not include mouldprotrusion. Overall Max. dimensions incl. mould (5) Lead coplanarity over the leads is 0,1 mm. maximum. (6) Surfaces may remain unplated (not solderable surfaces) Lead Dambar protrusion (#2) (0.3 max.) (0.55 max.) 0.15 max. (#1)
Product data sheet Rev. 3 — 8 July 2021 11 of 16 BLP15H9S10; BLP15H9S10G Power LDMOS transistor Fig 11. Package outline SOT1483-1 (sheet 1 of 2) DETAIL A SCALE 25 : 1 A SOT1483-1 Package outline drawing: Revision: Sheet 1 of 2 Revision date: 2/21/2017 Tolerances unless otherwise stated: Dimension: /g66 0.05 Angle: /g66 1° Third angle projectionSOT1483-1 units in mm. 4.95 (#2) 8.13/g66 0.10 1.57 0.50 /g660.10 5.92 0.24 /g660.025 2.03 2.08() PIN 1 Exposed Heatsink 0.00 - 0.10 2/g96 - 8/g96 0.25 0.43 - 0.63 /g760.25 A 9.65 (#1)A Seating Plane Gage Plane 6.10 (#1) 3.8 m in. 4.5 m ax. 7.4 min. 8.7 max. Flash/bleed allowed hatched area (2x) 1.78/g66 0.10 (#4) Compound allowed 0.20() /g760.2 B B
Product data sheet Rev. 3 — 8 July 2021 12 of 16 BLP15H9S10; BLP15H9S10G Power LDMOS transistor Fig 12. Package outline SOT1483-1 (sheet 2 of 2) DETAIL B SCALE 50 : 1 B SOT1483-1 Package outline drawing: Revision: Sheet 2 of 2 Revision date: 2/21/2017 Tolerances unless otherwise stated: Dimension: /g66 0.05 Angle: /g66 1° Third angle projectionSOT1483-1 units in mm. Drawing Notes Items Description (1) Dimensions are excluding mold protrusion. The mold protrusion is maximum 0.15 mm per side. See also detail B. (2) The lead dambar (metal) protrusions are not included. Add 0.14 mm max to the total lead dimension at the dambar location. (3) The leads and exposed heatsink ar e plated with matte Tin (Sn). (4) Dimensions (Heatsink ears) 10,67 and 1,78 do not include mouldprotrusion. Overall Max. dimensions incl. mould (5) Surfaces may remain unplated (not solderable surfaces). Lead Dambar protrusion (#2) 0.15 max. (#1) (0.55 max.) (0.3 max.)
[1] CDM classification C2B is granted to any part t hat passes after exposure to an ESD pulse of 750 V. [2] HBM classification 1C is granted to any part that passes after exposure to an ESD pulse of 1000 V. electrostatic sensitive devices. Table 10. ESD sensitivity Table 11. Abbreviations Table 12. Revision history
Product data sheet Rev. 3 — 8 July 2021 14 of 16 BLP15H9S10; BLP15H9S10G Power LDMOS transistor 12. Legal information
12.1 Data sheet status
[1] Please consult the most recently issued document before initiating or completing a design. [2] The term ‘short data sheet’ is explained in section “Definitions”. [3] The product status of device(s) described in this document may have changed since this document was published and may differ in case of multiple devices. The latest product status information is available on the Internet at URL http://www.ampleon.com.
12.2 Definitions
Draft — The document is a draft version only. The content is still under internal review and subject to formal approval, which may result in modifications or additions. Ampleon does not give any representations or warranties as to the accuracy or completeness of information included herein and shall have no liability for the consequences of use of such information. Short data sheet — A short data sheet is an extract from a full data sheet with the same product type number(s) and title. A short data sheet is intended for quick reference only and should not be relied upon to contain detailed and full information. For detailed and full information see the relevant full data sheet, which is available on request via the local Ampleon sales office. In case of any inconsistency or conflict with the short data sheet, the full data sheet shall prevail. Product specification — The information and data provided in a Product data sheet shall define the specification of the product as agreed between Ampleon and its customer, unless Ampleon and customer have explicitly agreed otherwise in writing. In no event however, shall an agreement be valid in which the Ampleon product is deemed to offer functions and qualities beyond those described in the Product data sheet.
12.3 Disclaimers
Maturity — The information in this document can only be regarded as final once the relevant product(s) has passed the Release Gate in Ampleon's release process. Prior to such release this document should be regarded as a draft version. Limited warranty and liability — Information in this document is believed to be accurate and reliable. However, Ampleon does not give any representations or warranties, expressed or implied, as to the accuracy or completeness of such information and shall have no liability for the consequences of use of such information. Ampleon takes no responsibility for the content in this document if provided by an information source outside of Ampleon. In no event shall Ampleon be liable for any indirect, incidental, punitive, special or consequential damages (including - without limitation - lost profits, lost savings, business interruption, costs related to the removal or replacement of any products or rework charges) whether or not such damages are based on tort (including negligence), warranty, breach of contract or any other legal theory. Notwithstanding any damages that customer might incur for any reason whatsoever, Ampleon’s aggregate and cumulative liability towards customer for the products described herein shall be limited in accordance with the Terms and conditions of commercial sale of Ampleon. Right to make changes — Ampleon reserves the right to make changes to information published in this document, including without limitation specifications and product descriptions, at any time and without notice. This document supersedes and replaces all information supplied prior to the publication hereof. Suitability for use — Ampleon products are not designed, authorized or warranted to be suitable for use in life support, life-critical or safety-critical systems or equipment, nor in applications where failure or malfunction of an Ampleon product can reasonably be expected to result in personal injury, death or severe property or environmental damage. Ampleon and its suppliers accept no liability for inclusion and/or use of Ampleon products in such equipment or applications and therefore such inclusion and/or use is at the customer’s own risk. Applications — Applications that are described herein for any of these products are for illustrative purposes only. Ampleon makes no representation or warranty that such applications will be suitable for the specified use without further testing or modification. Customers are responsible for the design and operation of their applications and products using Ampleon products, and Ampleon accepts no liability for any assistance with applications or customer product design. It is customer’s sole responsibility to determine whether the Ampleon product is suitable and fit for the customer’s applications and products planned, as well as for the planned application and use of customer’s third party customer(s). Customers should provide appropriate design and operating safeguards to minimize the risks associated with their applications and products. Ampleon does not accept any liability related to any default, damage, costs or problem which is based on any weakness or default in the customer’s applications or products, or the application or use by customer’s third party customer(s). Customer is responsible for doing all necessary testing for the customer’s applications and products using Ampleon products in order to avoid a default of the applications and the products or of the application or use by customer’s third party customer(s). Ampleon does not accept any liability in this respect. Limiting values — Stress above one or more limiting values (as defined in the Absolute Maximum Ratings System of IEC 60134) will cause permanent damage to the device. Limiting values are stress ratings only and (proper) operation of the device at these or any other conditions above those given in the Recommended operating conditions section (if present) or the Characteristics sections of this document is not warranted. Constant or repeated exposure to limiting values will permanently and irreversibly affect the quality and reliability of the device. Terms and conditions of commercial sale — Ampleon products are sold subject to the general terms and conditions of commercial sale, as published at http://www.ampleon.com/terms, unless otherwise agreed in a valid written individual agreement. In case an individual agreement is concluded only the terms and conditions of the respective agreement shall apply. Ampleon hereby expressly objects to applying the customer’s general terms and conditions with regard to the purchase of Ampleon products by customer. No offer to sell or license — Nothing in this document may be interpreted or construed as an offer to sell products that is open for acceptance or the grant, conveyance or implication of any license under any copyrights, patents or other industrial or intellectual property rights. Document status[1][2] Product status[3] Definition Objective [short] data sheet Development This document contains da ta from the objective specification for product development. Preliminary [short] data sheet Qualification This document contains data from the preliminary specification. Product [short] data sheet Production This docu ment contains the product specification.
Product data sheet Rev. 3 — 8 July 2021 15 of 16 BLP15H9S10; BLP15H9S10G Power LDMOS transistor Export control — This document as well as the item(s) described herein may be subject to export control regulations. Export might require a prior authorization from competent authorities. Non-automotive qualified products — Unless this data sheet expressly states that this specific Ampleon product is automotive qualified, the product is not suitable for automotive use. It is neither qualified nor tested in accordance with automotive testing or application requirements. Ampleon accepts no liability for inclusion and/or use of non-automotive qualified products in automotive equipment or applications. In the event that customer uses the product for design-in and use in automotive applications to automotive specifications and standards, customer (a) shall use the product without Ampleon’s warranty of the product for such automotive applications, use and specifications, and (b) whenever customer uses the product for automotive applications beyond Ampleon’s specifications such use shall be solely at customer’s own risk, and (c) customer fully indemnifies Ampleon for any liability, damages or failed product claims resulting from customer design and use of the product for automotive applications beyond Ampleon’s standard warranty and Ampleon’s product specifications. Translations — A non-English (translated) version of a document is for reference only. The English version shall prevail in case of any discrepancy between the translated and English versions.
12.4 Trademarks
Notice: All referenced brands, product names, service names and trademarks are the property of their respective owners. 13. Contact information For more information, please visit: http://www.ampleon.com For sales office addresses, please visit: http://www.ampleon.com/sales
BLP15H9S10; BLP15H9S10G Power LDMOS transistor © Ampleon Netherlands B.V. 2021. All rights reserved. For more information, please visit: http://www.ampleon.com For sales office addresses, please visit: http://www.ampleon.com/sales Date of release: 8 July 2021 Document identifier: BLP15H9S10_BLP15H9S10G Please be aware that important notices concerning this document and the product(s) described herein, have been included in section ‘Legal information’. 14. Contents