DATASHEET SEARCH SITE | WWW.ALLDATASHEET.COM

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 14

Technical content

1.1 General description

device is perfectly suited as a device in the frequency range from 728 MHz to 821 MHz. [1] Test signal: 3GPP test model 1; 64 DPCH; PAR = 7.2 dB at 0.01 % probability on CCDF.

1.2 Features and benefits

1.3 Applications

Table 1. Performance VGSq(peaking) =V GSq(carrier)  0.55 V.

2.1 Pinning

2.2 Pin description

The exposed backside of the package is the ground terminal of the device. Table 2. Pin description

Table 2. Pin description …continued Table 3. Ordering information Table 4. Limiting values In accordance with the Absolute Maximum Rating System (IEC 60134).

[1] When operated with a 1-carrier W-CDMA with PAR = 7.2 dB. Table 5. Thermal characteristics Table 6. DC characteristics Tcase = 25 C; unless otherwise specified. Table 7. RF Characteristics measured in an Ampleon production circuit.

[1] Pulsed CW power sweep measurement (  =1 0% , tp = 100 s). [2] S-parameters measured in a demo circuit. Table 8. Typical performance frequency band demo circuit.

821 MHz

[1] American Technical Ceramics type 600F or capacitor of same quality. [2] Murata or capacitor of same quality.

8.1 Ruggedness in a Doherty operation

Table 9. Demo test circuit list of components See Figure 3 for component layout.

Product data sheet Rev. 1 — 4 February 2021 7 of 14 BLM9D0708-05AM LDMOS 1-stage integrated Doherty MMIC

8.2 Graphs

VDS =2 8V ; IDq =1 2m A ; VGS(amp)peak = 1.55 V; (1) f = 728 MHz (2) f = 774.5 MHz (3) f = 821 MHz V DS =2 8V ; IDq =1 2m A ; VGS(amp)peak =1 . 5 5V . Test signal: 1-carrier W-CDMA; 3GPP test model 1; 64 DPCH; PAR = 7.2 dB at 0.01 % probability CCDF. (1) f = 728 MHz (2) f = 774.5 MHz (3) f = 821 MHz Fig 4. Power gain and drain efficiency as function of output power; typical values Fig 5. Power gain and drain efficiency as function of output power; typical values VDS =2 8V ; IDq =1 2m A ; VGS(amp)peak =1 . 5 5V . Test signal: 1-carrier W-CDMA; 3GPP test model 1; 64 DPCH; PAR = 7.2 dB at 0.01 % probability CCDF. (1) f = 728 MHz (2) f = 774.5 MHz (3) f = 821 MHz Fig 6. Adjacent channel power ratio (5 MHz) as a function of output power; typical values amp01581 20 24 28 32 36 40 12 20 14 30 16 40 18 50 20 60 22 70 PL (dBm) GpGp (dB)(dB)(dB) ηDηD (%)(%)(%)(1)(1)(1) (2)(2)(2) (3)(3)(3) (1)(1)(1) (2)(2)(2) (3)(3)(3) GpGp ηDηD amp01582 20 22 24 26 28 30 32 34 36 12 20 14 30 16 40 18 50 20 60 22 70 PL (dBm) GpGp (dB)(dB)(dB) ηDηD (%)(%)(%)(1)(1)(1) (2)(2)(2) (3)(3)(3) (1)(1)(1) (2)(2)(2) (3)(3)(3) GpGp ηDηD amp01583 20 22 24 26 28 30 32 34 -50 -45 -40 -35 -30 -25 PL (dBm) ACPRACPR5M5MACPR5M (dBc)(dBc)(dBc) (1)(1)(1) (2)(2)(2) (3)(3)(3)

Product data sheet Rev. 1 — 4 February 2021 8 of 14 BLM9D0708-05AM LDMOS 1-stage integrated Doherty MMIC VDS =2 8V ; IDq =1 2m A ; VGS(amp)peak = 1.55 V; f = 774.5 MHz. Test signal: 2-carrier pulsed CW; tp = 100 s;  =1 0% . (1) IMD low (2) IMD high Fig 7. VBW capability amp01585 1 10 102 103 -100 -80 -60 -40 -20 carrier spacing (MHz) IMDIMDIMD (dBc)(dBc)(dBc) (1)(1)(1) (2)(2)(2) (1)(1)(1) (2)(2)(2) (1)(1)(1) (2)(2)(2) IMD3IMD3IMD3 IMD5IMD5IMD5 IMD7IMD7IMD7

Product data sheet Rev. 1 — 4 February 2021 9 of 14 BLM9D0708-05AM LDMOS 1-stage integrated Doherty MMIC 9. Package outline Fig 8. Package outline LGA-7x7-20-2 (sheet 1 of 2) DETAIL A SCALE 50 : 1 SECTION B-B SCALE 80:1 Cropped view See detail A Section B-B LGA-7x7-20-2 Package outline drawing: Revision: Sheet 1 of 2 Revision date: 30-Dec-19 Tolerances unless otherwise stated: Dimension: B 0.10 Angle: B 1° Third angle projectionLGA-7x7-20-2 units in mm. Publication 7.00 7.00 Terminal 1 index area 20 16 Terminal 1 index area 0.98 B A L 0.100A (0.98) H 0.050 C 0.025B 0.010 (1) Exposed metal Solder resist CF0.050 (2) C 6.80 6.80 4.90 4.90 L0.100 B 0.42 (20x) 0.50 (20x) 1.03 (16x) F 0.100 C F 0.100C

Product data sheet Rev. 1 — 4 February 2021 10 of 14 BLM9D0708-05AM LDMOS 1-stage integrated Doherty MMIC Fig 9. Package outline LGA-7x7-20-2 (sheet 2 of 2) LGA-7x7-20-2 Package outline drawing: Revision: Sheet 2 of 2 Revision date: 30-Dec-19 Tolerances unless otherwise stated: Dimension: B 0.10 Angle: B 1° Third angle projectionLGA-7x7-20-2 units in mm. Drawing Notes Item Description 1 Metal thickness of solder pads.

2 Flatness with respect to exposed metal

[1] CDM classification C2A is granted to any part that passes after exposure to an ESD pulse of 500 V. [2] HBM classification 1C is granted to any part that passes after exposure to an ESD pulse of 1000 V. electrostatic sensitive devices. Table 10. ESD sensitivity Table 11. Abbreviations Table 12. Revision history

Product data sheet Rev. 1 — 4 February 2021 12 of 14 BLM9D0708-05AM LDMOS 1-stage integrated Doherty MMIC 13. Legal information

13.1 Data sheet status

[1] Please consult the most recently issued document before initiating or completing a design. [2] The term ‘short data sheet’ is explained in section “Definitions”. [3] The product status of device(s) described in this document may have changed since this document was published and may differ in case of multiple devices. The latest product status information is available on the Internet at URL http://www.ampleon.com.

13.2 Definitions

Draft — The document is a draft version only. The content is still under internal review and subject to formal approval, which may result in modifications or additions. Ampleon does not give any representations or warranties as to the accuracy or completeness of information included herein and shall have no liability for the consequences of use of such information. Short data sheet — A short data sheet is an extract from a full data sheet with the same product type number(s) and title. A short data sheet is intended for quick reference only and should not be relied upon to contain detailed and full information. For detailed and full information see the relevant full data sheet, which is available on request via the local Ampleon sales office. In case of any inconsistency or conflict with the short data sheet, the full data sheet shall prevail. Product specification — The information and data provided in a Product data sheet shall define the specification of the product as agreed between Ampleon and its customer, unless Ampleon and customer have explicitly agreed otherwise in writing. In no event however, shall an agreement be valid in which the Ampleon product is deemed to offer functions and qualities beyond those described in the Product data sheet.

13.3 Disclaimers

Maturity — The information in this document can only be regarded as final once the relevant product(s) has passed the Release Gate in Ampleon's release process. Prior to such release this document should be regarded as a draft version. Limited warranty and liability — Information in this document is believed to be accurate and reliable. However, Ampleon does not give any representations or warranties, expressed or implied, as to the accuracy or completeness of such information and shall have no liability for the consequences of use of such information. Ampleon takes no responsibility for the content in this document if provided by an information source outside of Ampleon. In no event shall Ampleon be liable for any indirect, incidental, punitive, special or consequential damages (including - without limitation - lost profits, lost savings, business interruption, costs related to the removal or replacement of any products or rework charges) whether or not such damages are based on tort (including negligence), warranty, breach of contract or any other legal theory. Notwithstanding any damages that customer might incur for any reason whatsoever, Ampleon’s aggregate and cumulative liability towards customer for the products described herein shall be limited in accordance with the Terms and conditions of commercial sale of Ampleon. Right to make changes — Ampleon reserves the right to make changes to information published in this document, including without limitation specifications and product descriptions, at any time and without notice. This document supersedes and replaces all information supplied prior to the publication hereof. Suitability for use — Ampleon products are not designed, authorized or warranted to be suitable for use in life support, life-critical or safety-critical systems or equipment, nor in applications where failure or malfunction of an Ampleon product can reasonably be expected to result in personal injury, death or severe property or environmental damage. Ampleon and its suppliers accept no liability for inclusion and/or use of Ampleon products in such equipment or applications and therefore such inclusion and/or use is at the customer’s own risk. Applications — Applications that are described herein for any of these products are for illustrative purposes only. Ampleon makes no representation or warranty that such applications will be suitable for the specified use without further testing or modification. Customers are responsible for the design and operation of their applications and products using Ampleon products, and Ampleon accepts no liability for any assistance with applications or customer product design. It is customer’s sole responsibility to determine whether the Ampleon product is suitable and fit for the customer’s applications and products planned, as well as for the planned application and use of customer’s third party customer(s). Customers should provide appropriate design and operating safeguards to minimize the risks associated with their applications and products. Ampleon does not accept any liability related to any default, damage, costs or problem which is based on any weakness or default in the customer’s applications or products, or the application or use by customer’s third party customer(s). Customer is responsible for doing all necessary testing for the customer’s applications and products using Ampleon products in order to avoid a default of the applications and the products or of the application or use by customer’s third party customer(s). Ampleon does not accept any liability in this respect. Limiting values — Stress above one or more limiting values (as defined in the Absolute Maximum Ratings System of IEC 60134) will cause permanent damage to the device. Limiting values are stress ratings only and (proper) operation of the device at these or any other conditions above those given in the Recommended operating conditions section (if present) or the Characteristics sections of this document is not warranted. Constant or repeated exposure to limiting values will permanently and irreversibly affect the quality and reliability of the device. Terms and conditions of commercial sale — Ampleon products are sold subject to the general terms and conditions of commercial sale, as published at http://www.ampleon.com/terms, unless otherwise agreed in a valid written individual agreement. In case an individual agreement is concluded only the terms and conditions of the respective agreement shall apply. Ampleon hereby expressly objects to applying the customer’s general terms and conditions with regard to the purchase of Ampleon products by customer. Document status[1][2] Product status[3] Definition Objective [short] data sheet Development This document contains da ta from the objective specification for product development. Preliminary [short] data sheet Qualification This document contains data from the preliminary specification. Product [short] data sheet Production This docu ment contains the product specification.

Product data sheet Rev. 1 — 4 February 2021 13 of 14 BLM9D0708-05AM LDMOS 1-stage integrated Doherty MMIC No offer to sell or license — Nothing in this document may be interpreted or construed as an offer to sell products that is open for acceptance or the grant, conveyance or implication of any license under any copyrights, patents or other industrial or intellectual property rights. Export control — This document as well as the item(s) described herein may be subject to export control regulations. Export might require a prior authorization from competent authorities. Non-automotive qualified products — Unless this data sheet expressly states that this specific Ampleon product is automotive qualified, the product is not suitable for automotive use. It is neither qualified nor tested in accordance with automotive testing or application requirements. Ampleon accepts no liability for inclusion and/or use of non-automotive qualified products in automotive equipment or applications. In the event that customer uses the product for design-in and use in automotive applications to automotive specifications and standards, customer (a) shall use the product without Ampleon’s warranty of the product for such automotive applications, use and specifications, and (b) whenever customer uses the product for automotive applications beyond Ampleon’s specifications such use shall be solely at customer’s own risk, and (c) customer fully indemnifies Ampleon for any liability, damages or failed product claims resulting from customer design and use of the product for automotive applications beyond Ampleon’s standard warranty and Ampleon’s product specifications. Translations — A non-English (translated) version of a document is for reference only. The English version shall prevail in case of any discrepancy between the translated and English versions.

13.4 Trademarks

Notice: All referenced brands, product names, service names and trademarks are the property of their respective owners. 14. Contact information For more information, please visit: http://www.ampleon.com For sales office addresses, please visit: http://www.ampleon.com/sales

LDMOS 1-stage integrated Doherty MMIC © Ampleon Netherlands B.V. 2021. All rights reserved. For more information, please visit: http://www.ampleon.com For sales office addresses, please visit: http://www.ampleon.com/sales Date of release: 4 February 2021 Document identifier: BLM9D0708-05AM Please be aware that important notices concerning this document and the product(s) described herein, have been included in section ‘Legal information’. 15. Contents