BFR35AP_07 INFINEON | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 5

Technical content

  • For low distortion broadband amplifiers and oscillators up to 2GHz at collector currents from 0.5mA to 20 mA
  • Pb-free (RoHS compliant) package1)
  • Qualified according AEC Q101 ESD (Electrostatic discharge) sensitive device, observe handling precaution! Type Marking Pin Configuration Package BFR35AP GEs 1 = B 2 = E 3 = C SOT23 Maximum Ratings Parameter Symbol Value Unit Collector-emitter voltage VCEO 15 V Collector-emitter voltage VCES 20 Collector-base voltage VCBO 20 Emitter-base voltage VEBO 2.5 Collector current IC 45 mA Base current IB 4 Total power dissipation2) TS ≤ 48°C Ptot 280 mW Junction temperature Tj 150 °C Ambient temperature TA -65 ... 150 Storage temperature Tstg -65 ... 150 Thermal Resistance Parameter Symbol Value Unit Junction - soldering point3) RthJS ≤ 365 K/W 1Pb-containing package may be available upon special request 2TS is measured on the collector lead at the soldering point to the pcb 3For calculation of RthJA please refer to Application Note Thermal Resistance

Electrical Characteristics at TA = 25°C, unless otherwise specified Parameter Symbol Values Unit min. typ. max. DC Characteristics Collector-emitter breakdown voltage I C = 1 mA, IB = 0 V(BR)CEO 15 - - V Collector-emitter cutoff current VCE = 20 V, VBE = 0 ICES - - 10 µA Collector-base cutoff current VCB = 10 V, IE = 0 ICBO - - 100 nA Emitter-base cutoff current VEB = 2.5 V, IC = 0 IEBO - - 100 µA DC current gain- IC = 15 mA, VCE = 8 V, pulse measured hFE 70 100 140 -

Electrical Characteristics at TA = 25°C, unless otherwise specified Parameter Symbol Values Unit min. typ. max. AC Characteristics (verified by random sampling) Transition frequency IC = 15 mA, VCE = 8 V, f = 500 MHz fT 3.5 5 - GHz Collector-base capacitance VCB = 10 V, f = 1 MHz, VBE = 0 , emitter grounded Ccb - 0.39 0.55 pF Collector emitter capacitance VCE = 10 V, f = 1 MHz, VBE = 0 , base grounded Cce - 0.23 - Emitter-base capacitance VEB = 0.5 V, f = 1 MHz, VCB = 0 , collector grounded Ceb - 0.64 - Noise figure IC = 2 mA, VCE = 6 V, ZS = ZSopt, f = 900 MHz f = 1.8 GHz F 1.4 dB Power gain, maximum available1) IC = 15 mA, VCE = 8 V, ZS = ZSopt, ZL = ZLopt, f = 900 MHz f = 1.8 GHz Gma 10.5 Transducer gain I C = 15 mA, VCE = 8 V, ZS = ZL = 50Ω , f = 900 MHz f = 1.8 GHz |S21e|2 7.5 dB

Marking Layout (Example) Standard Packing Reel ø180 mm = 3.000 Pieces/Reel Reel ø330 mm = 10.000 Pieces/Reel EH s BCW66 Type code Pin 1 0.8 0.9 0.91.3 0.8 1.2

0.25 M BC

1.9 -0.05 +0.10.4 ±0.12.9 0.95 C B 0...8˚ 0.2 A 0.1 MAX. 1.3 ±0.1 10˚ MAX. M 2.4 ±0.15 ±0.11 A 0.15 MIN. 1) Lead width can be 0.6 max. in dambar area 3.15 2.65 2.13 0.9 0.2 1.15Pin 1 Manufacturer 2005, June Date code (YM)

81726 München, Germany

© Infineon Technologies AG 2007. All Rights Reserved. Attention please! The information given in this dokument shall in no event be regarded as a guarantee of conditions or characteristics (“Beschaffenheitsgarantie”). With respect to any examples or hints given herein, any typical values stated herein and/or any information regarding the application of the device, Infineon Technologies hereby disclaims any and all warranties and liabilities of any kind, including without limitation warranties of non-infringement of intellectual property rights of any third party. Information For further information on technology, delivery terms and conditions and prices please contact your nearest Infineon Technologies Office (www.infineon.com). Warnings Due to technical requirements components may contain dangerous substances. For information on the types in question please contact your nearest Infineon Technologies Office. Infineon Technologies Components may only be used in life-support devices or systems with the express written approval of Infineon Technologies, if a failure of such components can reasonably be expected to cause the failure of that life-support device or system, or to affect the safety or effectiveness of that device or system. Life support devices or systems are intended to be implanted in the human body, or to support and/or maintain and sustain and/or protect human life. If they fail, it is reasonable to assume that the health of the user or other persons may be endangered.