BFN39_11 INFINEON | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 6

Technical content

PNP Silicon High-Voltage Transistors

  • Suitable for video output stages in TV sets and switching power supplies
  • High breakdown voltage
  • Low collector-emitter saturation voltage
  • Complementary types: BFN38 (NPN)
  • Pb-free (RoHS compliant) package
  • Qualified according AEC Q101 Type Marking Pin Configuration Package BFN39 BFN39 1=B 2=C 3=E 4=C - - SOT223 Maximum Ratings Parameter Symbol Value Unit Collector-emitter voltage VCEO 300 V Collector-base voltage VCBO 300 Emitter-base voltage VEBO 5 Collector current IC 200 mA Peak collector current, tp ≤ 10 ms ICM 500 Base current IB 100 Peak base current IBM 200 Total power dissipation- TS ≤ 124 °C Ptot 1.5 W Junction temperature Tj 150 °C Storage temperature Tstg -65 ... 150 Thermal Resistance Parameter Symbol Value Unit Junction - soldering point1) RthJS ≤ 17 K/W 1For calculation of RthJA please refer to Application Note AN077 (Thermal Resistance Calculation)

Electrical Characteristics at TA = 25°C, unless otherwise specified Parameter Symbol Values Unit min. typ. max. DC Characteristics Collector-emitter breakdown voltage IC = 1 mA, IB = 0 V(BR)CEO 300 - - V Collector-base breakdown voltage IC = 100 µA, IE = 0 V(BR)CBO 300 - - Emitter-base breakdown voltage IE = 100 µA, IC = 0 V(BR)EBO 5 - - Collector-base cutoff current VCB = 250 V, IE = 0 VCB = 250 V, IE = 0 , TA = 150 °C ICBO 0.1 µA Emitter-base cutoff current VEB = 5 V, IC = 0 IEBO - - 100 nA DC current gain1) IC = 1 mA, VCE = 10 V IC = 10 mA, VCE = 10 V IC = 30 mA, VCE = 10 V hFE Collector-emitter saturation voltage1) IC = 20 mA, IB = 2 mA VCEsat - - 0.5 V Base emitter saturation voltage1) IC = 20 mA, IB = 2 mA VBEsat - - 0.9 AC Characteristics Transition frequency IC = 20 MHz, VCE = 10 V, f = 100 MHz fT - 100 - MHz Collector-base capacitance VCB = 30 V, f = 1 MHz Ccb - 2.5 - pF 1Pulse test: t < 300µs; D < 2%

DC current gain hFE = ƒ(IC) VCE = 10 V EHP00642BFN 37/39 10 mA h C FE 100 10 10 10-1 0 1 2 3 Ι 102 555 Collector current IC = ƒ(VBE) VCE = 10V EHP00641BFN 37/39 0 V BE 1.5 C 10-1 0.5 1.0 100 Ι V mA 102 Collector cutoff current ICBO = ƒ(TA) VCBO = 200 V EHP00644BFN 37/39 0 ˚C A 150 CB0 10-1 50 100 102 100 Ι T nA max typ 103 Transition frequency fT = ƒ(IC) VCE = 10 V EHP00643BFN 37/39 MHz 10 10 mA f C 1010 T 555 Ι 012 3 101

Collector-base capacitance Ccb = ƒ(VCB) Emitter-base capacitance Ceb = ƒ(VEB) 0 4 8 12 16 V 22 VCB(VEB pF CCB(CEB) CCB CEB Total power dissipation Ptot = ƒ(TS) 0 15 30 45 60 75 90 105 120 °C 150 TS 0.3 0.6 0.9 1.2 W 1.8 Ptot Permissible Pulse Load Ptotmax/PtotDC = ƒ(tp) EHP00254BFN 37/39 010 D = 101 102 310 10-5 10-4 10-3 10-2 100s 0.005 0.01 0.02 0.05 0.1 0.2 0.5 totmax totP DC P pt t p =D T t p T

Marking Layout (Example) Packing Reel ø180 mm = 1.000 Pieces/Reel Reel ø330 mm = 4.000 Pieces/Reel 2005, 24 CW Date code (YYWW) BCP52-16 Type code Pin 1 12 3 ±0.1 ±0.04 0.5 MIN. 0.28 0.1 MAX. 15˚ MAX. 6.5±0.2 A 4.6 2.30.7±0.1

0.25 M A

1.6±0.1 7±0.3 B0.25 M ±0.23.5 B 3.5 1.4 4.8 1.4 1.11.2 8 0.3 MAX. 6.8 7.55 1.75Pin 1 Manufacturer 0...10˚

81726 Munich, Germany

 2009 Infineon Technologies AG All Rights Reserved. Legal Disclaimer The information given in this document shall in no event be regarded as a guarantee of conditions or characteristics. With respect to any examples or hints given herein, any typical values stated herein and/or any information regarding the application of the device, Infineon Technologies hereby disclaims any and all warranties and liabilities of any kind, including without limitation, warranties of non-infringement of intellectual property rights of any third party. Information For further information on technology, delivery terms and conditions and prices, please contact the nearest Infineon Technologies Office (<www.infineon.com >). Warnings Due to technical requirements, components may contain dangerous substances. For information on the types in question, please contact the nearest Infineon Technologies Office. Infineon Technologies components may be used in life-support devices or systems only with the express written approval of Infineon Technologies, if a failure of such components can reasonably be expected to cause the failure of that life-support device or system or to affect the safety or effectiveness of that device or system. Life support devices or systems are intended to be implanted in the human body or to support and/or maintain and sustain and/or protect human life. If they fail, it is reasonable to assume that the health of the user or other persons may be endangered.