BF060 GCT | Alldatasheet
Document overview
- Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
- PDF pages: 1
Technical content
2.00 B ±0.38 4.00 D±0.2 WC±0.2 2.00 2.00 A ±0.25 Pin 0.50±0.02 sq. E±0.2 A B C D E F G H 678 C 3rd Angle Projection Units: Metric (mm) Tolerances (Except as Noted) X. ± 0.30 X.X ± 0.20 X.XX ± 0.15 X.XXX ± 0.10 LengthAngle Product Description This drawing is confidential and copyright of Global Connector Technology, Ltd (GCT). This drawing must not be copied or disclosed without written consent. E & OE Not to Scale Drawn By LYH Sheet No. BF0602.00mm Pitch Pin Header,Dual Row, Through Hole,Horizontal CC BF060 F PCN By Detail Revision Part Number Drawing Date 31st October 2007 11/08/22 Date X.° ± 5° X.X° ± 2° X.XX° ± 1° X.XXX° ± 0.5° No. of Contacts 04 to 80 BF060 Ordering Grid XXXXXXX XXXXX Dimension C (1/100mm) (Post Length) 0400 = 4.00mm (Standard) Or specify Custom Post Length eg 0250 = 2.50mm (Maximum 1000 = 10.00mm) (Minimum 0100 = 1.00mm)Dimension D (1/100mm) (Tail Length) 0280 = 2.80mm (Standard) Or specify CustomTail Length eg 0250 = 2.50mm (Maximum 0600 = 6.00mm) (Minimum 0100 = 1.00mm) Insulator Material N = Nylon 6T (Standard) L = LCP P = PBT X Packing Options G = Plastic Box (Standard) B = Tape & Reel with Cap (08 to 80 contacts) C = Tape & Reel with Film D = Tube (08 to 80 contacts) E = Tube with Cap (08 to 80 contacts) Contact Plating A = Gold Flash All Over (Standard) B = Selective Gold Flash Contact Area/ Tin On Tail C = Tin All Over G = 10µ" Gold Contact Area/Tin On Tail I = 30µ" Gold Contact Area/Tin On Tail Request Samples and Quotation Specifications Material Contact: Copper Alloy Insulator: Standard: Polyamide, Nylon 6T, UL 94-V0 Options:Polymer, LCP, UL 94-V0 Options:Polyester, PBT, UL 94-V0 Plating See Ordering Grid Electrical Current Rating: 2 Amp Per Pin Insulation Resistance: 1000 MΩ min Contact Resistance: 20 mΩ max. Dielectric Withstand Voltage: AC 500 V Mechanical & Environmental Operating Temperature: -40°C to +105°C Soldering Process: Nylon 6T (Standard) - IR Reflow: 260°C for 10 sec. Wave:230°C for 5-10 sec Manual Solder: 350°C for 3-5 sec LCP (Option) - IR Reflow: 260°C for 10 sec. Wave:250°C for 5-10 sec Manual Solder: 350°C for 3-5 sec PBT(Option) - Manual Solder: 330°C for 3-5 sec (Not Suitable for High Temperature Process) Mates with(Subject to pin length) BF065 BF080 BF095 BF100 BF115 BF120 BF185 Perfect Planar Mating with BF110 BF112 X Dimension W (1/100mm) (Insulator Width) B = 2.00mm (Standard) A = 1.5mm Ø0.90 2.00 2.00 Recommended PCB Layout XXXX Dimension E (1/100mm) (Centre of Pin to Top of Insulator) 0305 = 3.05mm (Standard) (Minimum 0175= 1.75mm for Insulator width 1.5mm) (Minimum 0225= 2.25mm for Insulator width 2.0mm) Or specify Custom Stack Heigth eg 0250 = 2.50mm (Maximum 0600 = 6.00mm) 1.00 No. of Contacts Dimensions AB 42 . 0 4 . 0 64 . 0 6 . 0 86 . 0 8 . 0 10 8.0 10.0 12 10.0 12.0 1412.0 14.0 16 14.0 16.0 18 16.0 18.0 20 18.0 20.0 22 20.0 22.0 2422.0 24.0 26 24.0 26.0 28 26.0 28.0 30 28.0 30.0 32 30.0 32.0 34 32.0 34.0 36 34.0 36.0 38 36.0 38.0 40 38.0 40.0 4240.0 42.0 4442.0 44.0 46 44.0 46.0 48 46.0 48.0 50 48.0 50.0 52 50.0 52.0 54 52.0 54.0 56 54.0 56.0 58 56.0 58.0 60 58.0 60.0 62 60.0 62.0 64 62.0 64.0 66 64.0 66.0 68 66.0 68.0 70 68.0 70.0 7270.0 72.0 7472.0 74.0 76 74.0 76.0 78 76.0 78.0 80 78.0 80.0 www.gct.co