DATASHEET SEARCH SITE | WWW.ALLDATASHEET.COM

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 16

Technical content

BAT15... Silicon Schottky Diodes

  • Low barrier type for DBS mixer applications up to 12 GHz, phase detectors and modulators
  • Low noise figure
  • Pb-free (RoHS compliant) package BAT15-02EL BAT15-02ELS BAT15-03W BAT15-05W BAT15-099 BAT15-099RBAT15-04W /G33 /G31 /G44 /G32 /G32 /G44 /G31 /G33 /G31 /G44 /G32 /G32 /G44 /G31 /G31 /G44 /G32 /G32 /G33 /G34 /G44 /G31 /G31 /G32 /G33 /G34 /G44 /G32 /G44 /G31 /G44 /G33 /G44 /G34 /G31 /G32 ESD (Electrostatic discharge) sensitive device, observe handling precaution! Type Package Configuration LS(nH) Marking BAT15-02EL BAT15-02ELS BAT15-03W BAT15-04W BAT15-05W BAT15-099 BAT15-099R TSLP-2-19 TSSLP-2-3 SOD323 SOT323 SOT323 SOT143 SOT143 single, leadless single, leadless single series common cathode anti-parallel pair cross-over ring 0.4 0.2 1.8 1.4 1.4 NN S underline white P S8s S5s S5s S6s

BAT15... Maximum Ratings at TA = 25 °C, unless otherwise specified Parameter Symbol Value Unit Diode reverse voltage VR 4 V Forward current IF 110 mA Total power dissipation BAT15-02ELS, T S ≤ 73 °C BAT15-02EL, TS ≤ 76 °C BAT15-03W, TS ≤ 70 °C BAT15-04W, TS ≤ 68 °C BAT15-05W, TS ≤ 65 °C BAT15-099, TS ≤ 48 °C BAT15-099R, TS ≤ 67 °C Ptot 100 100 100 100 100 100 100 Junction temperature Tj 150 °C Operating temperature range Top -55 ... 150 Storage temperature Tstg -55 ... 150 Thermal Resistance Parameter Symbol Value Unit Junction - soldering point1) BAT15-02ELS BAT15-02EL BAT15-03W BAT15-04W BAT15-05W BAT15-099 BAT15-099R RthJS ≤ 770 ≤ 780 ≤ 795 ≤ 820 ≤ 850 ≤ 1020 ≤ 830 1For calculation of RthJA please refer to Application Note AN077 (Thermal Resistance Calculation)

BAT15... Electrical Characteristics at TA = 25 °C, unless otherwise specified Parameter Symbol Values Unit min. typ. max. DC Characteristics Breakdown voltage I(BR) = 100 µA V(BR) 4 - - V Reverse current VR = 1 V IR - - 5 µA Forward voltage IF = 1 mA IF = 10 mA VF 0.16 0.25 0.23 0.32 0.32 0.41 V Forward voltage matching1) IF = 10 mA ∆ VF - - 20 mV AC Characteristics Diode capacitance VR = 0 V, f = 1 MHz, BAT15-02ELS VR = 0 V, f = 1 MHz, BAT15-099R VR = 0 V, f = 1 MHz, all others types CT 0.23 0.5 0.35 pF Differential forward resistance IF = 10 mA / 50 mA RF - 5.5 - Ω 1∆ VF is the difference between lowest and highest VF in a multiple diode component.

BAT15... Diode capacitance CT = ƒ (VR) f = 1MHz 00.0 EHD07082 C T RV 2V4 0.2 0.4 pF 0.5 0.1 0.3 Reverse current IR = ƒ(VR) TA = Parameter 010 EHD07081 ΙR RV A 125 CT A = 1234 V µ C C Forward current IF = ƒ (VF) TA = Parameter 0.010 EHD07077BAT 15-099R Ι F FV A -40 ˚CT A = 0.5 1.0V m 125 Forward current IF = ƒ (TS) BAT15-02EL 0 15 30 45 60 75 90 105 120 °C 150 TS 100 mA 120 IF

BAT15... Forward current IF = ƒ (TS) BAT15-03W 0 15 30 45 60 75 90 105 120 °C 150 TS 100 mA 120 IF Forward current IF = ƒ (TS) BAT15-02ELS 0 15 30 45 60 75 90 105 120 °C 150 TS 100 mA 120 IF Forward current IF = ƒ (TS) BAT15-05W 0 15 30 45 60 75 90 105 120 °C 150 TS 100 mA 120 IF Forward current IF = ƒ (TS) BAT15-04W 0 15 30 45 60 75 90 105 120 °C 150 TS 100 mA 120 IF

BAT15... Forward current IF = ƒ (TS) BAT15-099 0 15 30 45 60 75 90 105 120 °C 150 TS 100 mA 120 IF Forward current IF = ƒ (TS) BAT15-099R 0 15 30 45 60 75 90 105 120 °C 150 TS 100 mA 120 IF Permissible Puls Load RthJS = ƒ (tp) BAT15-02EL 10 -7 10 -6 10 -5 10 -4 10 -3 10 -2 10 0 s tp 1 10 2 10 3 10 K/WRthJS 0.5 0.2 0.1 0.05 0.02 0.01 0.005 D = 0 Permissible Pulse Load IFmax/ IFDC = ƒ (tp) BAT15-02EL 10 -6 10 -5 10 -4 10 -3 10 -2 10 0 s tp 0 10 1 10 IFmax/IFDC D = 0 0.005 0.01 0.02 0.05 0.1 0.2 0.5

BAT15... Permissible Puls Load RthJS = ƒ (tp) BAT15-03W 10 -6 10 -5 10 -4 10 -3 10 -2 10 0 s tp 1 10 2 10 3 10 K/WRthJS D=0.5 0.2 0.1 0.05 0.02 0.01 0.005 Permissible Pulse Load IFmax/ IFDC = ƒ (tp) BAT15-03W 10 -6 10 -5 10 -4 10 -3 10 -2 10 0 s tp 0 10 1 10 IFmax/IFDC D=0 0.005 0.01 0.02 0.05 0.1 0.2 0.5 Permissible Puls Load RthJS = ƒ (tp) BAT15-04W 10 -6 10 -5 10 -4 10 -3 10 -2 10 0 s tp 1 10 2 10 3 10 K/WRthJS D=0.5 0.2 0.1 0.05 0.02 0.01 0.005 Permissible Pulse Load IFmax/ IFDC = ƒ (tp) BAT15-04W 10 -6 10 -5 10 -4 10 -3 10 -2 10 0 s tp 0 10 1 10 IFmax/IFDC D=0 0.005 0.01 0.02 0.05 0.1 0.2 0.5

BAT15... Permissible Pulse Load IFmax/ IFDC = ƒ (tp) BAT15-05W 10 -6 10 -5 10 -4 10 -3 10 -2 10 0 s tp 0 10 1 10 IFmax/IFDC D=0 0.005 0.01 0.02 0.05 0.1 0.2 0.5 Permissible Puls Load RthJS = ƒ (tp) BAT15-05W 10 -6 10 -5 10 -4 10 -3 10 -2 10 0 s tp 1 10 2 10 3 10 K/WRthJS D=0.5 0.2 0.1 0.05 0.02 0.01 0.005 Permissible Pulse Load IFmax/ IFDC = ƒ (tp) BAT15-099 10 -6 10 -5 10 -4 10 -3 10 -2 10 0 s tp 0 10 1 10 IFmax/IFDC D=0 0.005 0.01 0.02 0.05 0.1 0.2 0.5 Permissible Puls Load RthJS = ƒ (tp) BAT15-099 10 -6 10 -5 10 -4 10 -3 10 -2 10 0 s tp 1 10 2 10 3 10 K/WRthJS D=0.5 0.2 0.1 0.05 0.02 0.01 0.005

BAT15... Permissible Puls Load RthJS = ƒ (tp) BAT15-099R 10 -6 10 -5 10 -4 10 -3 10 -2 10 0 s tp 1 10 2 10 3 10 K/WRthJS D=0.5 0.2 0.1 0.05 0.02 0.01 0.005 Permissible Pulse Load IFmax/ IFDC = ƒ (tp) BAT15-099R 10 -6 10 -5 10 -4 10 -3 10 -2 10 0 s tp 0 10 1 10 IFmax/IFDC D=0 0.005 0.01 0.02 0.05 0.1 0.2 0.5

BAT15... S11-Parameters for BAT15-099 Typical impedance characteristics (with external bias I and Zo = 50Ω) GHz MAG ANG MAG ANG MAG ANG MAG ANG MAG ANG 0.94 0.93 0.92 0.91 0.91 0.91 0.91 0.91 0.91 0.9 0.89 0.88 -16.4 -33.8 -53.8 -74.3 -96.6 -115.4 -131 -143 -155.6 -167.3 175.5 175.5 0.84 0.88 0.86 0.84 0.84 0.84 0.84 0.84 0.83 0.83 0.8 0.76 -16.6 -33.8 -54.5 -75.3 -97.6 -116.7 -132.3 -144.5 -150.2 -169.7 172.6 146.5 0.77 0.77 0.75 0.72 0.72 0.73 0.73 0.73 0.71 0.71 0.7 0.62 -16.4 -34.5 -54.1 -76.4 -99.1 -118.7 -134.1 -146.8 -159.7 -178.8 170 142.8 0.59 0.58 0.58 0.51 0.53 0.53 0.54 0.55 0.53 0.51 0.45 0.39 -17.2 -35.2 -56.1 -78.4 -102.3 -122.9 -138.1 -150.5 -163.9 -175.8 164.9 134.2 0.19 0.15 0.13 0.11 0.15 0.18 0.2 0.81 0.18 0.14 0.09 0.14 -16.7 -36.1 -64.8 -104.8 -135.7 -160.9 -168.8 179.4 179.4 151.2 105.5 43.6 S11 = (f, I) BAT15-099 - 250 - 50 EHD07083 - 10 - 25 - 100 + 10 + 250 + 100+ 25 + 50 10 25 50 100 250 12 0.05 0.1 0.2 0.5 0.02 f

1 GHz

j j j j j j j j j j mA mA mA mA mA Hz

BAT15...Package SOD323

BAT15...Package SOT143

BAT15...Package SOT323 Package Outline Foot Print Marking Layout (Example) Standard Packing Reel ø180 mm = 3.000 Pieces/Reel Reel ø330 mm = 10.000 Pieces/Reel 1.25 ±0.1 0.1 MAX. 2.1±0.1 0.15 +0.1 -0.05 0.3+0.1 ±0.10.9 A ±0.22 -0.05 0.650.65 M 0.1 0.1 MIN. 0.1 M0.2 A 0.24 2.15 1.1 2.3 Pin 1 Pin 1 2005, June Date code (YM) BCR108W Type code 0.6 0.8 1.6 0.65 0.65 Manufacturer

BAT15...Package TSLP-2-19

BAT15...Package TSSLP-2-3

BAT15... Edition 2009-11-16 Published by Infineon Technologies AG

81726 Munich, Germany

 2009 Infineon Technologies AG All Rights Reserved. Legal Disclaimer The information given in this document shall in no event be regarded as a guarantee of conditions or characteristics. With respect to any examples or hints given herein, any typical values stated herein and/or any information regarding the application of the device, Infineon Technologies hereby disclaims any and all warranties and liabilities of any kind, including without limitation, warranties of non-infringement of intellectual property rights of any third party. Information For further information on technology, delivery terms and conditions and prices, please contact the nearest Infineon Technologies Office (<www.infineon.com >). Warnings Due to technical requirements, components may contain dangerous substances. For information on the types in question, please contact the nearest Infineon Technologies Office. Infineon Technologies components may be used in life-support devices or systems only with the express written approval of Infineon Technologies, if a failure of such components can reasonably be expected to cause the failure of that life-support device or system or to affect the safety or effectiveness of that device or system. Life support devices or systems are intended to be implanted in the human body or to support and/or maintain and sustain and/or protect human life. If they fail, it is reasonable to assume that the health of the user or other persons may be endangered.