DATASHEET SEARCH SITE | WWW.ALLDATASHEET.COM

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 10

Technical content

BAR90... Silicon Deep Trench PIN Diodes

  • Optimized for low bias current antenna switches in hand held applications
  • Very low capacitance at zero volt reverse bias at frequencies above 1GHz (typ. 0.19 pF)
  • Low forward resistance (typ. 1.3 Ω @ I F = 3 mA)
  • Improved ON / OFF mode harmonic distortion balance
  • Pb-free (RoHS compliant) package BAR90-02EL BAR90-02ELS BAR90-098LRH D2D1 Type Package Configuration LS(nH) Marking BAR90-02ELS BAR90-02EL BAR90-098LRH TSSLP-2-3 TSLP-2-19 TSLP-4-7 single, leadless single, leadless anti-parallel pair, leadless 0.2 0.4 0.4 X * Marking of TSSLP-2-3 with underline Maximum Ratings at TA = 25°C, unless otherwise specified Parameter Symbol Value Unit Diode reverse voltage VR 80 V Forward current IF 100 mA Total power dissipation TS ≤ 137 °C, BAR90-02ELS TS ≤ 133°C, all others Ptot 150 250 mW Junction temperature Tj 150 °C Operating temperature range Top -55 ... 125 Storage temperature Tstg -55 ... 150

BAR90... Thermal Resistance Parameter Symbol Value Unit Junction - soldering point1) BAR90-02ELS All others RthJS ≤ 90 ≤ 65 K/W Electrical Characteristics at TA = 25°C, unless otherwise specified Parameter Symbol Values Unit min. typ. max. DC Characteristics Breakdown voltage I (BR) = 5 µA V(BR) 80 - - V Reverse current V R = 60 V IR - - 50 nA Forward voltage I F = 3 mA IF = 100 mA VF 0.75 0.81 0.9 0.87 V 1For calculation of RthJA please refer to Application Note AN077 (Thermal Resistance Calculation)

BAR90... Electrical Characteristics at TA = 25°C, unless otherwise specified Parameter Symbol Values Unit min. typ. max. AC Characteristics Diode capacitance VR = 1 V, f = 1 MHz VR = 0 V, f = 100 MHz VR = 0 V, f = 1 GHz VR = 0 V, f = 1.8 GHz CT 0.25 0.3 0.19 0.18 0.35 pF Reverse parallel resistance V R = 0 V, f = 100 MHz VR = 0 V, f = 1 GHz VR = 0 V, f = 1.8 GHz RP kΩ Forward resistance I F = 1 mA, f = 100 MHz IF = 3 mA, f = 100 MHz IF = 10 mA, f = 100 MHz rf 1.3 0.8 2.3 Ω Charge carrier life time I F = 10 mA, IR = 6 mA, measured at IR = 3 mA, RL = 100 Ω τ rr - 750 - ns I-region width WI - 20 - µm Insertion loss1) IF = 1 mA, f = 1.8 GHz IF = 3 mA, f = 1.8 GHz IF = 10 mA, f = 1.8 GHz IL 0.16 0.11 0.08 dB Isolation1) VR = 0 V, f = 0.9 GHz VR = 0 V, f = 1.8 GHz VR = 0 V, f = 2.45 GHz ISO 18.5 13.5 11.5 1BAR90-02EL in series configuration, Z = 50 Ω

BAR90... Diode capacitance CT = ƒ (VR) f = Parameter 0 2 4 6 8 10 12 14 16 V 20 VR 0.1 0.15 0.2 0.25 0.3 0.35 0.4 pF 0.5 CT

1 MHz

100 MHz

1 GHz

1.8 GHz

Reverse parallel resistance RP = ƒ(VR) f = Parameter 0 2 4 6 8 10 12 14 16 V 20 VR -1 10 0 10 1 10 2 10 3 10 4 10 KOhmRp Forward resistance rf = ƒ (IF) f = 100 MHz 10 -1 10 0 10 1 10 2 mA IF -1 10 0 10 1 10 Ohmrf Forward current IF = ƒ (VF) TA = Parameter VF -6 10 -5 10 -4 10 -3 10 -2 10 -1 10 A IF -40°C +25 °C +85 °C +125 °C

BAR90... Forward current IF = ƒ (TS) BAR90-02EL / -098LRH 0 15 30 45 60 75 90 105 120 °C 150 TS 100 mA 120 IF Forward current IF = ƒ (TS) BAR90-02ELS 0 15 30 45 60 75 90 105 120 °C 150 TS 100 mA 120 IF Permissible Puls Load RthJS = ƒ (tp) BAR90-02EL / -098LRH 10 -7 10 -6 10 -5 10 -4 10 -3 10 -2 10 -1 10 1 °C tp -1 10 0 10 1 10 2 10 mA RthJS 0.5 0.2 0.1 0.05 0.02 0.01 0.005 D = 0 Permissible Pulse Load IFmax/ IFDC=ƒ (tp) BAR90-02EL /-098LRH 10 -7 10 -6 10 -5 10 -4 10 -3 10 -2 10 0 °C tp 0 10 1 10 2 10 mA IFmax/IFDC D = 0 0.005 0.01 0.02 0.05 0.1 0.2 0.5

BAR90... Permissible Pulse Load IFmax/ IFDC = ƒ (tp) BAR90-02ELS 10 -7 10 -6 10 -5 10 -4 10 -3 10 -2 10 0 s tp 0 10 1 10 2 10 IFmax/IFDC D = 0 0.005 0.01 0.02 0.05 0.1 0.2 0.5 Permissible Puls Load RthJS = ƒ (tp) BAR90-02ELS 10 -7 10 -6 10 -5 10 -4 10 -3 10 -2 10 0 s tp -1 10 0 10 1 10 2 10 RthJS D = 0,5 0,2 0,1 0,05 0,02 0,01 0,005 Insertion loss IL = -|S21|2 = ƒ(f) IF = Parameter BAR90-02EL in series configuration, Z = 50Ω 0 1 2 3 4 GHz 6 f -0.4 -0.35 -0.3 -0.25 -0.2 -0.15 -0.1 dB |S21|² 10mA 3mA 1mA 0.5mA Isolation ISO = -|S21|2 = ƒ(f) VR = Parameter BAR90-02EL in series configuration, Z = 50Ω 0 1 2 3 4 GHz 6 f -30 -25 -20 -15 -10 dB |S21|² 0 V 1 V 10 V

BAR90...Package TSLP-2-19

BAR90...Package TSLP-4-7 3 3 0.05 MAX. +0.010.39-0.03 1) Dimension applies to plated terminal ±0.050.8 0.45±0.05 4x 0.25 1)±0.035 ±0.0351) 4x0.35 0.75±0.05 1.2±0.05 Bottom viewTop view Pin 1 marking 1.05 1.45 0.5 Pin 1 marking Reel ø180 mm = 15.000 Pieces/Reel For board assembly information please refer to Infineon website "Packages" Package Outline Foot Print Marking Layout (Example) Standard Packing Stencil aperturesCopper Solder mask 1.18 0.28 0.22 0.28 0.38 0.38 0.42 0.78 1.2 0.3 0.2 0.3 0.4 0.4 0.4 0.8 BAR90-07LRH Type code Pin 1 marking Laser marking

BAR90...Package TSSLP-2-3

BAR90... Edition 2009-11-16 Published by Infineon Technologies AG

81726 Munich, Germany

 2009 Infineon Technologies AG All Rights Reserved. Legal Disclaimer The information given in this document shall in no event be regarded as a guarantee of conditions or characteristics. With respect to any examples or hints given herein, any typical values stated herein and/or any information regarding the application of the device, Infineon Technologies hereby disclaims any and all warranties and liabilities of any kind, including without limitation, warranties of non-infringement of intellectual property rights of any third party. Information For further information on technology, delivery terms and conditions and prices, please contact the nearest Infineon Technologies Office (<www.infineon.com >). Warnings Due to technical requirements, components may contain dangerous substances. For information on the types in question, please contact the nearest Infineon Technologies Office. Infineon Technologies components may be used in life-support devices or systems only with the express written approval of Infineon Technologies, if a failure of such components can reasonably be expected to cause the failure of that life-support device or system or to affect the safety or effectiveness of that device or system. Life support devices or systems are intended to be implanted in the human body or to support and/or maintain and sustain and/or protect human life. If they fail, it is reasonable to assume that the health of the user or other persons may be endangered.