DATASHEET SEARCH SITE | WWW.ALLDATASHEET.COM

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 4

Technical content

Features

  • Capable of being mounted easily because of one- point fixing type plastic molded package (Inter- changeable with TO-3).
  • Wide ASO because of on-chip ballast resistance.
  • Good depenedence of f T on current and excellent high frequency responce. The descriptions in parentheses are for the 2SB817 only : other descriptions than those in parentheses are common to the 2SB817 and 2SD1047. Electrical Characteristics at Ta = 25˚C 1 : Base 2 : Collector 3 : Emitter SANYO : TO-3PB Tc=25˚C retemaraPl obmySs noitidnoC sgnitaR tinU nimp ytx am tnerruCffotuCrotcelloCI OBC V BC I,V08)–(= E 0=1 .0)–(A m tnerruCffotuCrettimEI OBE V BE I,V4)–(= C 0=1 .0)–(A m niaGtnerruCCDh EF 1V EC I,V5)–(= C A1)–(= *06* 002 h EF 2V EC I,V5)–(= C A6)–(= 02 tcudorPhtdiwdnaB-niaGf T V EC I,V5)–(= C A1)–(=5 1z HM ecnaticapaCtuptuOC bo V BC zHM1=f,V01)–(= )003(F p 012F p * : The 2SB817/2SD1047 are classified by 1A hFE as follows : 021D060 02E001

No.680–2/4 retemaraPl obmySs noitidnoC sgnitaR tinU nimp ytx am egatloVrettimE-ot-esaBV EB V EC I,V5)–(= C A1)–(=5 .1V egatloVnoitarutaSrettimE-ot-rotcelloCV )tas(EC IC I,A5)–(= B A5.0)–(= 6.05 .2V )1.1(V egatloVnwodkaerBesaB-ot-rotcelloCV OBC)RB( IC I,Am5)–(= E 0=0 61)–(V egatloVnwodkaerBrettimE-ot-rotcelloCV OEC)RB( IC R,Am5)–(= EB =∞ 041)–(V IC R,Am05)–(= EB =∞ 041)–(V egatloVnwodkaerBesaB-ot-rettimEV OBE)RB( IE I,Am5)–(= C 0=6 )–(V emiTNO-nruTt no tiucriCtseTdeificepseeS )52.0(s µ 62.0s µ emiTllaFt f tiucriCtseTdeificepseeS )35.0(s µ 86.0s µ emiTegarotSt gts tiucriCtseTdeificepseeS )16.1(s µ 88.6s µ Switching Time Test Circuit

No.680–3/4

Specifications of any and all SANYO products described or contained herein stipulate the performance, characteristics, and functions of the described products in the independent state, and are not guarantees of the performance, characteristics, and functions of the described products as mounted in the customer’s products or equipment. To verify symptoms and states that cannot be evaluated in an independent device, the customer should always evaluate and test devices mounted in the customer’s products or equipment. SANYO Electric Co., Ltd. strives to supply high-quality high-reliability products. However, any and all semiconductor products fail with some probability. It is possible that these probabilistic failures could give rise to accidents or events that could endanger human lives, that could give rise to smoke or fire, or that could cause damage to other property. When designing equipment, adopt safety measures so that these kinds of accidents or events cannot occur. Such measures include but are not limited to protective circuits and error prevention circuits for safe design, redundant design, and structural design. In the event that any and all SANYO products described or contained herein fall under strategic products (including services) controlled under the Foreign Exchange and Foreign Trade Control Law of Japan, such products must not be exported without obtaining export license from the Ministry of International Trade and Industry in accordance with the above law. No part of this publication may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording, or any information storage or retrieval system, or otherwise, without the prior written permission of SANYO Electric Co. , Ltd. Any and all information described or contained herein are subject to change without notice due to product/technology improvement, etc. When designing equipment, refer to the “Delivery Specification” for the SANYO product that you intend to use. Information (including circuit diagrams and circuit parameters) herein is for example only ; it is not guaranteed for volume production. SANYO believes information herein is accurate and reliable, but no guarantees are made or implied regarding its use or any infringements of intellectual property rights or other rights of third parties. This catalog provides information as of September, 1998. Specifications and information herein are subject to change without notice. 2SB817/2SD1047 PS No.680–4/4