24VSHIELDBTT6030TOBO1 INFINEON | Alldatasheet

Document overview

  • Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
  • PDF pages: 2

Technical content

24V Protected Switch Shield with BTT6030-2EKA and BTT6020-1EKA for Arduino Infineon’s PROFET™+ 24V family of protected high-side switches (BTT6xxx) drive resistive, capacitive as well as inductive loads (e.g. truck bulbs, car bulbs, valves, motors, relays, capacitors, LEDs). Using the 24V Protected Switch Shield for Arduino enables fast proto- typing and in-expensive evaluation of the pin-to-pin compatible PROFET™+ 24V devices. The shield is equipped with three PROtected high-side power MOSFETs out of the PROFET™+ 24V family (2x BTT6030-2EKA, 1x BTT6020-1EKA). It can be controlled either by an Arduino board (e.g. Arduino Uno, Arduino Due) or the ARM® powered Infineon XMC™ microcontroller kits using the Arduino form factor. The power switches are controlled via the INx (input) pins. The PROFET™+ 24V devices also provide a sense current at the IS pin, which can be enabled via the DEN (Diagnosis ENable) pin. For the two channel devices the sensed channel is selected via the DSEL (Diagnosis SELect) pin. For each device the sense signal (IS) is connected to an own ADC channel of the microcontroller. The 24V Protected Switch Shield provides a fast and easy access to drive up to five 24 V loads with a nominal current of 4 A to 5 A each. Drive resistive, capacitive and inductive loads with PWM or DC › 8 ~ 36 V nominal input voltage (max. 5 ~ 48 V) › Nominal current up to 5 A per channel restricted due to PCB (BTT6020-1EKA nominal current: 7 A) › E.g. truck bulbs, valves, motors, relays › Compatible with Arduino micro- controller boards and Infineon’s XMC™ microcontroller kits using the Arduino form factor › Capable of PWM up to 400 Hz › Driver circuit with logic level inputs › Diagnosis with current sense › Protection of load and driver circuit, e.g. against overtemperature, overcurrent, ESD › Fast and inexpensive prototyping of

24 V load driving

› Load diagnosis with current sense capability › Overtemperature shutdown with latch behavior

Applications

www.infineon.com/profet www.infineon.com/shields-for-arduino Order number: 24VSHIELDBTT6030TOBO1 Power supply (e.g. PC-USB, mobile phone charger) BTT6030-2EKA BTT6030-2EKA BTT6020-EKA VS GND IN0 IN1 DSEL DEN IS OUT1 OUT0 I/O ADC I/O I/O I/O VBat VS Reverse current blocking VS GND IN0 IN1 DSEL DEN IS OUT1 OUT0 I/O ADC I/O I/O I/O XMC1000 boot kit XMC4700 relax kit XMC4800 relax kit AURIX™ TC275 VS GND IN DEN IS OUT0 I/O ADC I/O

24V Protected Switch Shield with BTT6030-2EKA and BTT6020-1EKA for Arduino The BTT6030-2EKA and BTT6020-1EKA are integrated high-side power switches and part of the PROFET™+ 24V family. The power transis- tor is built by an N-channel vertical power MOSFET with charge pump in one package (DSO-14). To block reverse current on the board an IPD50P04P4L-11 is used. › 24 V grounded high-side loads › Suitable for automotive and industrial applications › All types of resistive, inductive and capacitive loads › Suitable for high and low current loads such as bulbs, valves, relays and LEDs › Replaces electromechanical relays, fuses and discrete circuits Diagnostic functions › Proportional load current sense › Open load detection in ON and OFF › Overtemperature sense › Stable diagnostic signal during short circuit › Enhanced kILIS accuracy with calibration Basic functions › RoHS compliant & AEC qualified › Op. voltage range (5 … 48 V) › Low stand-by current (< 0.5 µA) › ESD protection, optimized EMC › 3.3 V and 5 V – compatible logic inputs › Improved heat dissipation of DSO package Protection functions › Load dump: 65 V › Current limitation › Thermal shutdown: latch › Enhanced short circuit operation › Loss of ground/battery protection › Stable behavior at under voltage › Overvoltage protection Published by Infineon Technologies AG

85579 Neubiberg, Germany

© 2016 Infineon Technologies AG. All Rights Reserved. Order Number: B124-I0333-V1-7600-EU-EC-P Date: 07 / 2016 Please note! THIS DOCUMENT IS FOR INFORMATION PURPOSES ONLY AND ANY INFORMATION GIVEN HEREIN SHALL IN NO EVENT BE REGARDED AS A WARRANTY, GUARANTEE OR DESCRIPTION OF ANY FUNCTIONALITY, CONDITIONS AND/OR QUALITY OF OUR PRODUCTS OR ANY SUITABILITY FOR A PARTICULAR PURPOSE. WITH REGARD TO THE TECHNICAL SPECIFICATIONS OF OUR PRODUCTS, WE KINDLY ASK YOU TO REFER TO THE RELEVANT PRODUCT DATA SHEETS PROVIDED BY US. OUR CUSTOMERS AND THEIR TECHNICAL DEPARTMENTS ARE REQUIRED TO EVALUATE THE SUITABILITY OF OUR PRODUCTS FOR THE INTENDED APPLICATION. WE RESERVE THE RIGHT TO CHANGE THIS DOCUMENT AND/OR THE INFORMATION GIVEN HEREIN AT ANY TIME. Additional information For further information on technologies, our products, the application of our products, delivery terms and conditions and/or prices, please contact your nearest Infineon Technologies office (www.infineon.com). Warnings Due to technical requirements, our products may contain dangerous substances. For information on the types in question, please contact your nearest Infineon Technologies office. Except as otherwise explicitly approved by us in a written document signed by authorized representatives of Infineon Technologies, our products may not be used in any life- endangering applications, including but not limited to medical, nuclear, military, life-critical or any other applications where a failure of the product or any consequences of the use thereof can result in personal injury. Product type RDS(on) (typ) [mΩ] RDS(on) (max) @ Tj = 150 °C [mΩ] Nominal load current [A] IL (SC) (typ) [A] Number of channels Package Automotive grade BTT6010-1EKA 10 22 9 115 1 DSO-14 BTT6020-1EKA 20 42 7 74 1 DSO-14 BTT6030-1EKA 30 64 6 70 1 DSO-14 BTT6030-2EKA 30 64 2 x 4 70 2 DSO-14 BTT6050-1EKA 50 100 4.5 47 1 DSO-14 BTT6050-2EKA 50 100 2 x 3 47 2 DSO-14 BTT6100-2EKA 100 200 2 x 2.2 25 2 DSO-14 BTT6200-1EJA 200 400 1.5 11 1 DSO-8 BTT6200-4EMA 200 400 4 x 1 11 4 SSOP-24 Special PROFET™+ 24V components with reduced current limitation (focus application: switching cables > 20 m cable length) BTT6010-1EKB 10 22 10 86 1 DSO-14 BTT6030-2EKB 30 64 2 x 4 60 2 DSO-14 BTF6070-2EKV 70 120 2 x 2.3 11 2 DSO-14