B100RH4S JOHANSONMANUFACTURING | Alldatasheet
Document overview
- Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
- PDF pages: 4
Technical content
www.knowlescapacitors.com 2-18GHz Surface Mount Bandpass Filter B100RH4S 2777 Route 20 East, Cazenovia, NY 13035| Ph.: (315)655-8710 To Order Contact KCCSales@knowles.com | For Technical Inquiries Contact DLIengineering@knowles.com March 2025
DESCRIPTION
DLI’s wideband, surface mount filter utilizes Knowles’ unique multilayer filter technology to create a compact, wideband performance filter.
FEATURES
- Small Size
- Shielded Component
- Solder Surface Mount Package
- Moisture Sensitivity Level: MSL1
- Frequency Stable over Temperature
- Operating & Storage Temp: -55˚C to +125˚C
- Characteristic Impedance: 50Ω Packaging and Ordering information: To request Tape and Reel packaging, please order part number B100RH4S-T SPECIFICATIONS* *Electrical specifications based on typical probed performance at room temperature. Insertion loss shall vary ±0.5dB over temperature. Power rating assumes the component will be mounted to a PCB with good thermally conducting ground vias as outlined in the recommended PCB layout that are connected to an adequate heat sink. Max power is based on 125°C base temperature. Parameter Frequency Range (GHz) Min Typ. Max Insertion Loss (dB) 2.0 - 18.0 2.0 3.0 Return Loss (dB) 10.0 15.0 Low Side Rejection (dB) DC - 1.0 25 35 High Side Rejection (dB) 21.5 - 35.0 20 30 CW Input Power (W) Size (L x W x H) 0.340 x 0.170 x 0.085 in 8.64 x 4.32 x 2.16 mm Information in this document is for informational and guideline purposes only. All information regarding the Product described in this datasheet is subject to change from time to time at Knowles Precision Devices ’ sole discretion. It is the customer’s sole responsibility to evaluate the suitability of the Product in the customer ’s particular application. Knowles Precision Devices assumes no responsibility or liability for the use of the information contained within.
www.knowlescapacitors.com 2-18GHz Surface Mount Bandpass Filter B100RH4S 2777 Route 20 East, Cazenovia, NY 13035| Ph.: (315)655-8710 To Order Contact KCCSales@knowles.com | For Technical Inquiries Contact DLIengineering@knowles.com March 2025 *Actual performance may vary. This measured data was acquired using the RF GSG probe test method, directly probing the backside of the filter. Typical Measured Performance
www.knowlescapacitors.com 2-18GHz Surface Mount Bandpass Filter B100RH4S 2777 Route 20 East, Cazenovia, NY 13035| Ph.: (315)655-8710 To Order Contact KCCSales@knowles.com | For Technical Inquiries Contact DLIengineering@knowles.com March 2025 Notes : 1. Termination Finish: ENIG : Au 2-3µ” over Ni 20-30µ” 2. Maximum Assembly Process Temperature: 250°C Physical Dimensions TOP VIEW SIDE VIEW BOTTOM VIEW Tolerances: For values with 3 decimal places ±0.001 For values with 4 decimal places ±0.0005 END VIEW Units = inches
www.knowlescapacitors.com 2-18GHz Surface Mount Bandpass Filter B100RH4S 2777 Route 20 East, Cazenovia, NY 13035| Ph.: (315)655-8710 To Order Contact KCCSales@knowles.com | For Technical Inquiries Contact DLIengineering@knowles.com March 2025 Recommended PCB Layout Note:
- 50Ω trace dimensions are application specific.
- Ensure adequate grounding beneath the part.
- Note avoid copper within the voided area in the center under the part Unit = inch For further details and best practices, reference the Microwave Products Guide, available at: https://www.knowlescapacitors.com/Support/Catalogs * *