B100RH2W JOHANSONMANUFACTURING | Alldatasheet
Document overview
- Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
- PDF pages: 4
Technical content
www.knowlescapacitors.com 2 - 18GHz Bandpass WB Filter B100RH2W 2777 Route 20 East, Cazenovia, NY 13035| Ph.: (315)655-8710 To Order Contact KCCSales@knowles.com | For Technical Inquiries Contact DLIengineering@knowles.com December 2024
DESCRIPTION
DLI’s wide band wirebond (WB) filter utilizes Knowles’ unique multilayer filter technology to enable compact wideband performance.
FEATURES
- Small Size
- Wirebond configuration
- Excellent Repeatability
- Moisture Sensitivity Level: MSL1
- Operating & Storage Temp: -40˚C to +125˚C
- Characteristic Impedance: 50Ω Packaging and Ordering information: To request tape and reel packaging, please order part number B100RH2W-T SPECIFICATIONS* Parameter Frequency Range (GHz) Min* Typ. Max* Insertion Loss (dB) 2.0 - 18.0 0.7 2 Return Loss (dB) 7 12 Low Side Rejection (dB) DC - 0.8 0.80 - 0.90 High Side Rejection (dB) 22. - 28.5 25 35 28.5 - 35.0 15 25 CW Input Power** (W) 2.0 - 18.0 5 Size (L x W x H) 0.370 x 0.160 x 0.010 inch 9.4 x 4.0 x 0.25 mm Information in this document is for informational and guideline purposes only. All information regarding the Product described in this datasheet is subject to change from time to time at Knowles Precision Devices ’ sole discretion. It is the customer’s sole responsibility to evaluate the suitability of the Product in the customer ’s particular application. Knowles Precision Devices assumes no responsibility or liability for the use of the information contained within. *Electrical specifications based on typical mounted performance at room temperature. Insertion loss shall vary ±0.5dB over temperature. ** Power rating assumes the component will be mounted to a PCB with good thermally conducting ground vias as outlined in the recommended PCB layout that are connected to an adequate heat sink. Max power is based on 125°C base temperature.
www.knowlescapacitors.com 2 - 18GHz Bandpass WB Filter B100RH2W 2777 Route 20 East, Cazenovia, NY 13035| Ph.: (315)655-8710 To Order Contact KCCSales@knowles.com | For Technical Inquiries Contact DLIengineering@knowles.com December 2024 Typical Measured Data Wideband Performance Narrowband Performance -100 -90 -80 -70 -60 -50 -40 -30 -20 -10 0 5 10 15 20 25 30 35 40 Magnitude (dB) Frequency (GHz) S11 S21 -20 -19 -18 -17 -16 -15 -14 -13 -12 -11 -10 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 Magnitude (dB) Frequency (GHz) S11 S21
www.knowlescapacitors.com 2 - 18GHz Bandpass WB Filter B100RH2W 2777 Route 20 East, Cazenovia, NY 13035| Ph.: (315)655-8710 To Order Contact KCCSales@knowles.com | For Technical Inquiries Contact DLIengineering@knowles.com December 2024 Wire-bond Locations Physical Dimensions Units = inches (in) DETAIL A (2 PLACES) Termination Finish (including ground plane on bottom): Gold Top Bottom Side
www.knowlescapacitors.com 2 - 18GHz Bandpass WB Filter B100RH2W 2777 Route 20 East, Cazenovia, NY 13035| Ph.: (315)655-8710 To Order Contact KCCSales@knowles.com | For Technical Inquiries Contact DLIengineering@knowles.com December 2024 Gap around Filter 0.005” min. Shield Thickness 0.008-0.010” Shield Height/ Clearance 0.040” Application Notes This wirebond filter is attached to a flat metallized surface to provide grounding. If additional shielding is needed in the application, shielding may be added around the filter as specified below:
- Shield material: Gold-plated Brass, Steel, Aluminum or conductive metal
- Minimum shield material thickness: 0.008 inches
- Shield height/clearance: 0.040 inches
- Space required around filter: 0.005 inch Recommended material for attachment of the filter to the housing:
- Loctite Ablestik 5025E conductive epoxy