ATP204-TL-H

ATP204_12 SANYO | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 7

Technical content

Features

• Low ON-resistance • Large current
• 4.5V drive • Slim package
• Halogen free compliance • Protection diode in Specifi cations Absolute Maximum Ratings at Ta=25°C Parameter Symbol Conditions Ratings Unit Drain-to-Source Voltage V DSS 30 V Gate-to-Source Voltage V GSS ±20 V Drain Current (DC) I D 100 A Drain Current (PW≤10μs) I DP PW≤10μs, duty cycle≤1% 300 A Allowable Power Dissipation P D Tc=25°C6 0 W Channel Temperature Tch 150 °C Storage Temperature Tstg - -55 to +150 °C Avalanche Energy (Single Pulse) *1 E AS 235 mJ Avalanche Current *2 I AV 50 A Note : *1 VDD=15V , L=100μH, IAV=50A *2 L≤100μH, Single pulse Package Dimensions unit : mm (typ) 7057-001

61312 TKIM/91609PA TKIM TC-00002081

General-Purpose Switching Device

Applications

http://semicon.sanyo.com/en/network Product & Package Information

• Package : ATPAK
• JEITA, JEDEC : -
• Minimum Packing Quantity : 3,000 pcs./reel Packing Type: TL Marking Electrical Connection TL ATP204 LOT No. 2,4 SANYO Semiconductors DATA SHEET

No. A1551-2/7 Electrical Characteristics at Ta=25°C Parameter Symbol Conditions Ratings Unit min typ max Drain-to-Source Breakdown Voltage V (BR)DSS ID=1mA, VGS=0V 30 V Zero-Gate Voltage Drain Current I DSS V DS=30V, VGS=0V 1 μA Gate-to-Source Leakage Current I GSS VGS=±16V, VDS=0V ±10 μA Cutoff Voltage V GS(off) V DS=10V, ID=1mA 1.2 2.6 V Forward Transfer Admittance | yfs | VDS=10V, ID=50A 100 S Static Drain-to-Source On-State Resistance RDS(on)1 I D=50A, VGS=10V 4.3 5.6 m Ω RDS(on)2 I D=25A, VGS=4.5V 6.5 9.1 m Ω Input Capacitance Ciss VDS=10V, f=1MHz 4600 pF Output Capacitance Coss 700 pF Reverse Transfer Capacitance Crss 390 pF Turn-ON Delay Time td(on) See specifi ed Test Circuit. 40 ns Rise Time tr 690 ns Turn-OFF Delay Time td(off) 205 ns Fall Time tf 110 ns Total Gate Charge Qg VDS=15V, VGS=10V, ID=100A 70 nC Gate-to-Source Charge Qgs 22 nC Gate-to-Drain “Miller” Charge Qgd 9.2 nC Diode Forward Voltage VSD IS=100A, VGS=0V 1.03 1.2 V Switching Time Test Circuit

Ordering Information

Device Package Shipping memo ATP204-TL-H ATPAK 3,000pcs./reel Pb Free and Halogen Free PW=10μs D.C.≤1% P. G 50Ω G S D ID=50A RL=0.3Ω VDD=15V VOUT ATP204 VIN 10V VIN

No. A1551-3/7 RDS(on) -- VGS RDS(on) -- Tc ID -- VDS ID -- VGS IS -- VSD SW Time -- ID Drain-to-Source V oltage, VDS -- V Drain Current, ID -- A Gate-to-Source V oltage, VGS -- V Drain Current, ID -- A Gate-to-Source V oltage, VGS -- V Case Temperature, Tc -- °C Static Drain-to-Source On-State Resistance, RDS(on) -- mΩ Static Drain-to-Source On-State Resistance, RDS(on) -- mΩ Drain Current, ID -- A Drain Current, ID -- A Switching Time, SW Time -- ns Drain-to-Source V oltage, VDS -- V Ciss, Coss, Crss -- pF Diode Forward V oltage, VSD -- V Source Current, IS -- A | yfs | -- ID Forward Transfer Admittance, | yfs | -- S Ciss, Coss, Crss -- VDS 10075 100 1000 10000 3051 5 2 0 2 510 IT15005IT15004 IT15003 0.001 0.0175 IT15002 --25 f=1MHz Coss Crss Tc=75 0.1 1.0 23 5 723 5 7 5 10 100 723 100 1.0 VDS=10V 25°C Tc= --25 75°C 1000 100 0.1 1.0 23 5 7723 5 100 VDD=15V VGS=10V td(off) tf td(on) tr IT15000 IT15001 162 4 6 8 10 12 --60 --40 --20 0 20 40 60 80 100 120 140 16014 VGS=4.5V , I D=25A ID=25A 50A IT14998 IT14999 06 20 100 150 130 110 514 3 140 120 100 4.0V 4.5V VGS=3.5V --25 25°C Tc=75 Tc= --25 °CVDS=10VTc=25°C 6.0V 0.175 1.075 1075 10 23 5 7 8.0V 16.0V 10.0V Ciss °C 25 VGS=10.0V , I D=50A Single pulseTc=25°C Single pulse VGS=0V Single pulse

No. A1551-4/7 VGS -- Qg Total Gate Charge, Qg -- nC Gate-to-Source V oltage, VGS -- V EAS -- Ta Avalanche Energy derating factor -- % Ambient Temperature, Ta -- °C 25 50 75 100 125 150 100 120 175 IT14011 A S O PD -- Tc Drain-to-Source V oltage, VDS -- V Drain Current, ID -- A Case Temperature, Tc -- °C Allowable Power Dissipation, PD -- W IT14983 20 40 60 80 100 120 140 160 IT14982 0.1 1.0 0.1 IDP=300A ID=100A 100μs1ms 10ms 100ms DC operationOperation in this area is limited by RDS(on).1.023 5 7 2 1035 7 2 10μs 100 PW≤10μs Tc=25°C Single pulse IT15006 7030 40 60 5020 10VDS=15V ID=100A

No. A1551-5/7 Taping Specifi cation ATP204-TL-H

No. A1551-6/7 Outline Drawing Land Pattern Example ATP204-TL-H Mass (g) Unit 0.266 * For reference mm Unit: mm 6.5 6.71.6 2 2.3 2.3 1.5

No. A1551-7/7 PS This catalog provides information as of June, 2012. Specifi cations and information herein are subject to change without notice. Note on usage : Since the ATP204 is a MOSFET product, please avoid using this device in the vicinity of highly charged objects. Any and all SANYO Semiconductor Co.,Ltd. products described or contained herein are, with regard to "standard application", intended for the use as general electronics equipment. The products mentioned herein shall not be intended for use for any "special application" (medical equipment whose purpose is to sustain life, aerospace instrument, nuclear control device, burning appliances, transportation machine, traffic signal system, safety equipment etc.) that shall require extremely high level of reliability and can directly threaten human lives in case of failure or malfunction of the product or may cause harm to human bodies, nor shall they grant any guarantee thereof. If you should intend to use our products for new introduction or other application different from current conditions on the usage of automotive device, communication device, office equipment, industrial equipment etc. , please consult with us about usage condition (temperature, operation time etc.) prior to the intended use. If there is no consultation or inquiry before the intended use, our customer shall be solely responsible for the use. Specifications of any and all SANYO Semiconductor Co.,Ltd. products described or contained herein stipulate the performance, characteristics, and functions of the described products in the independent state, and are not guarantees of the performance, characteristics, and functions of the described products as mounted in the customer 's products or equipment. To verify symptoms and states that cannot be evaluated in an independent device, the customer should always evaluate and test devices mounted in the customer 's products or equipment. SANYO Semiconductor Co.,Ltd. assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all SANYO Semiconductor Co.,Ltd. products described or contained herein. Regarding monolithic semiconductors, if you should intend to use this IC continuously under high temperature, high current, high voltage, or drastic temperature change, even if it is used within the range of absolute maximum ratings or operating conditions, there is a possibility of decrease reliability. Please contact us for a confirmation. SANYO Semiconductor Co.,Ltd. strives to supply high-quality high-reliability products, however, any and all semiconductor products fail or malfunction with some probability. It is possible that these probabilistic failures or malfunction could give rise to accidents or events that could endanger human lives, trouble that could give rise to smoke or fire, or accidents that could cause damage to other property. When designing equipment, adopt safety measures so that these kinds of accidents or events cannot occur. Such measures include but are not limited to protective circuits and error prevention circuits for safe design, redundant design, and structural design. In the event that any or all SANYO Semiconductor Co.,Ltd. products described or contained herein are controlled under any of applicable local export control laws and regulations, such products may require the export license from the authorities concerned in accordance with the above law. No part of this publication may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording, or any information storage or retrieval system, or otherwise, without the prior written consent of SANYO Semiconductor Co.,Ltd. Any and all information described or contained herein are subject to change without notice due to product/technology improvement, etc. When designing equipment, refer to the "Delivery Specification" for the SANYO Semiconductor Co.,Ltd. product that you intend to use. Upon using the technical information or products described herein, neither warranty nor license shall be granted with regard to intellectual property rights or any other rights of SANYO Semiconductor Co.,Ltd. or any third party. SANYO Semiconductor Co.,Ltd. shall not be liable for any claim or suits with regard to a third party's intellectual property rights which has resulted from the use of the technical information and products mentioned above.