ATP106 SANYO | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 4

Technical content

Features

  • Low ON-resistance.
  • Large current.
  • Slim package.
  • 4.5V drive.
  • Halogen free compliance. Specifi cations Absolute Maximum Ratings at Ta=25°C Parameter Symbol Conditions Ratings Unit Drain-to-Source Voltage V DSS - -40 V Gate-to-Source Voltage V GSS ±20 V Drain Current (DC) I D - -30 A Drain Current (PW≤10μs) I DP PW≤10μs, duty cycle≤1% - -90 A Allowable Power Dissipation P D Tc=25°C4 0 W Channel Temperature Tch 150 °C Storage Temperature Tstg - -55 to +150 °C Avalanche Energy (Single Pulse) *1 E AS 30 mJ Avalanche Current *2 I AV - -15 A Note : *1 VDD=- -10V , L=200μH, IAV=- -15A *2 L≤200μH, Single pulse Electrical Characteristics at Ta=25°C Parameter Symbol Conditions Ratings Unit min typ max Drain-to-Source Breakdown Voltage V (BR)DSS ID=--1mA, VGS=0V - -40 V Zero-Gate Voltage Drain Current I DSS V DS=--40V, VGS=0V -- 1 μA Gate-to-Source Leakage Current I GSS VGS=±16V, VDS=0V ±10 μA Marking : ATP106 Continued on next page. N0409PA TK IM TC-00002145 SANYO Semiconductors DATA SHEET ATP106 P-Channel Silicon MOSFET General-Purpose Switching Device

Applications

www.semiconductor-sanyo.com/network

No. A1597-2/4 Continued from preceding page. Parameter Symbol Conditions Ratings Unit min typ max Cutoff Voltage V GS(off) V DS=--10V, ID=--1mA - -1.5 - -2.6 V Forward Transfer Admittance | yfs | VDS=--10V, ID=- -15A 28 S Static Drain-to-Source On-State Resistance RDS(on)1 I D=--15A, VGS=--10V 19 25 mΩ RDS(on)2 I D=--8A, VGS=--4.5V 29 41 mΩ Input Capacitance Ciss V DS=- -20V, f=1MHz 1380 pF Output Capacitance Coss V DS=- -20V, f=1MHz 210 pF Reverse Transfer Capacitance Crss V DS=- -20V, f=1MHz 150 pF Turn-ON Delay Time td(on) See speci fi ed Test Circuit. 12 ns Rise Time tr See speci fi ed Test Circuit. 120 ns Turn-OFF Delay Time td(off) See speci fi ed Test Circuit. 110 ns Fall Time tf See specifi ed Test Circuit. 90 ns Total Gate Charge Qg V DS=- -20V, VGS=- -10V, ID=- -30A 29 nC Gate-to-Source Charge Qgs V DS=- -20V, VGS=- -10V, ID=- -30A 6.4 nC Gate-to-Drain “Miller” Charge Qgd V DS=- -20V, VGS=- -10V, ID=- -30A 5.9 nC Diode Forward Voltage VSD IS=- -30A, VGS=0V - -0.97 - -1.5 V Package Dimensions unit : mm (typ) 7057-001 Switching Time Test Circuit 1 : Gate 2 : Drain 3 : Source 4 : Drain SANYO : ATPA K 0.7 0.4 0.55 9.5 7.3 0.51.7 4.6 6.05 6.5 0.6 0.8 0.5 1.5 0.4 2.6 4.6 0.4 0.1 2.3 2.3 PW=10μs D.C.≤1% P. G 50Ω G S D ID= --15A RL=1.33Ω VDD= --20V VOUT VIN --10V VIN ATP106

No. A1597-3/4 | yfs | -- ID RDS(on) -- VGS RDS(on) -- Tc ID -- VDS ID -- VGS IS -- VSD SW Time -- ID Drain-to-Source V oltage, VDS -- V Drain Current, ID -- A Gate-to-Source V oltage, VGS -- V Drain Current, ID -- A Gate-to-Source V oltage, VGS -- V Case Temperature, Tc -- °C Static Drain-to-Source On-State Resistance, RDS(on) -- mΩ Static Drain-to-Source On-State Resistance, RDS(on) -- mΩ Drain Current, ID -- A Drain Current, ID -- A Switching Time, SW Time -- ns Drain-to-Source V oltage, VDS -- V Ciss, Coss, Crss -- pF Diode Forward V oltage, VSD -- V Source Current, IS -- A Forward Transfer Admittance, | yfs | -- S Ciss, Coss, Crss -- VDS IT15125 IT15122 --50 --25 150 1000 100 IT15129 IT15127 --0.001 --0.01 --0.1 --1.0 --10 --100 --0.1 --1.023 5 7 2 --1035 7 5 7 23 0 25 50 75 100 125 °CTc= --25 --25 Tc=75 Tc=75 --25 Ciss Crss IT15128 100 1000 td(off) VDD= --20V VGS= --10V tr --5 --10 --35 --25 --30 --15 --20 --5 --10 --15 --50 --25 --20 --30 --35 --45 --40 IT15124 IT15123 --4.0V VGS= --3.0V --16.0V tf VGS= --4.5V , I D= --8A VGS= --10V , ID= --15A --8.0V Coss td(on) --4.5V--6.0V --10.0V ID= --8A --15A --3.5V VDS= --10V Single pulse IT15126 --0.1 --1.023 5 7 1.0 2 --1035 7 5 7 23 Tc= --25 25°C 75°C VDS= --10V Single pulse f=1MHz Tc=25°C Single pulse Tc=25°C Single pulse Single pulse VGS=0V Single pulse

No. A1597-4/4 SANYO Semiconductor Co.,Ltd. assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all SANYO Semiconductor Co.,Ltd. products described or contained herein. SANYO Semiconductor Co.,Ltd. strives to supply high-quality high-reliability products, however, any and all semiconductor products fail or malfunction with some probability. It is possible that these probabilistic failures or malfunction could give rise to accidents or events that could endanger human lives, trouble that could give rise to smoke or fire, or accidents that could cause damage to other property. When designing equipment, adopt safety measures so that these kinds of accidents or events cannot occur. Such measures include but are not limited to protective circuits and error prevention circuits for safe design, redundant design, and structural design. Upon using the technical information or products described herein, neither warranty nor license shall be granted with regard to intellectual property rights or any other rights of SANYO Semiconductor Co.,Ltd. or any third party. SANYO Semiconductor Co.,Ltd. shall not be liable for any claim or suits with regard to a third party's intellectual property rights which has resulted from the use of the technical information and products mentioned above. Information (including circuit diagrams and circuit parameters) herein is for example only; it is not guaranteed for volume production. Any and all information described or contained herein are subject to change without notice due to product/technology improvement, etc. When designing equipment, refer to the "Delivery Specification" for the SANYO Semiconductor Co.,Ltd. product that you intend to use. In the event that any or all SANYO Semiconductor Co.,Ltd. products described or contained herein are controlled under any of applicable local export control laws and regulations, such products may require the export license from the authorities concerned in accordance with the above law. No part of this publication may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording, or any information storage or retrieval system, or otherwise, without the prior written consent of SANYO Semiconductor Co.,Ltd. PS This catalog provides information as of November, 2009. Specifi cations and information herein are subject to change without notice. Note on usage : Since the ATP106 is a MOSFET product, please avoid using this device in the vicinity of highly charged objects. VGS -- Qg Total Gate Charge, Qg -- nC Gate-to-Source V oltage, VGS -- V EAS -- Ta Avalanche Energy derating factor -- % Ambient Temperature, Ta -- °C 25 50 75 100 125 150 100 120 175 IT15133 A S O Drain-to-Source V oltage, VDS -- V Drain Current, ID -- A PD -- Tc Allowable Power Dissipation, PD -- W Case Temperature, Tc -- °C IT15131IT15130 0 5 10 15 25 20 30 --2 --4 --6 --1 --3 --5 --8 --7 --9 --10 VDS= --20V ID= --30A IT15132 --0.1 --1.0 --10 --0.1 IDP= --90A ID= --30A 100 μs 1ms 10ms100ms DC operation Operation in this area is limited by RDS(on). --1.023 5 7 2 --1035 7 2 3 7 5 10μs --100 20 40 60 80 100 140 120 160 PW≤10μs Tc=25°C Single pulse