ATNMA2 ANALOGTECHNOLOGIES | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 9
Technical content
Figure 1. The Physical Photo of ATNMA2 one rechargeable battery, one coaxial cable, and some probes. large, partial voltage can be used. is 3V/3000=1mV. The maximum output peak-peak is 3V. Input impedance is 10k and the output impedance is <0.1 Ω.
- Amplification Magnifications
magnification switch S1 to S1-3 and S5 to S5-3. magnification switch S1 to S1-2 and S5 to S5-3. magnification switch S1 to S1-1 and S5 to S5-3. switch S1 to S1-1 and S5 to S5-2. switch S1 to S1-1 and S5 to S5-1. Please see the switch locations in Figure 2.
Figure 6. Probe Angle of ATNMA2 battery switch, and the power indication LEDs should be lit. observable but not saturated). power supply from oscilloscope. G is magnification of the noise measurement amplifier. voltage of the input terminal. value of the device under testing.
Figure 12. Application Presentation Photo of ATNMA2
Figure 16. Dimensions of AHVA2KV2X20MA Table 2. Part Number
Copyrights 2000-2021, Analog Technologies, Inc. All Rights Reserved. Updated on 7/6/2021 Email: staff@analogti.com/sales@anal ogti.com 9 Analog Technologies ATNMA2 Noise Measurement Amplifier NOTICE 1. ATI warrants performance of its products for one year to the specifications applicable at the time of sale, except for those being damaged by excessive abuse. Products found not meeting the specifications within one year from the date of sale can be exchanged free of charge. 2. ATI reserves the right to make changes to its products or to discontinue any product or service without notice, and advise customers to obtain the latest version of relevant information to verify, before placing orders, that information being relied on is current and complete. 3. All products are sold subject to the terms and conditions of sale supplied at the time of order acknowledgment, including those pertaining to warranty, patent infringement, and limita tion of liability. Testing and other quality control techniques are utilized to the extent ATI deems necessary to support this warranty. Specific testing of all parameters of each device is not necessarily performed, except those mandated by government requirements. 4. Customers are responsible for their applications using ATI components. In order to minimize risks associated with the customers’ applications, adequate design and operating safeguards must be provided by the customers to minimize inherent or procedural hazards. ATI assumes no liability for applications assistance or customer product design. 5. ATI does not warrant or represent that any license, either expressed or implied, is granted under any patent right, copyright, mask work right, or other intellectual property rights of ATI covering or relating to any combination, machine, or process in which such products or services might be or are used. ATI’s publication of information regarding any third party’s products or services does not constitute ATI’s approval, warranty or endorsement thereof. 6. IP (Intellectual Property) Ownership: ATI retains the ownership of full rights for special technologies and/or techniques embedded in its products, the designs for mechanics, optics, plus all modifications, improvements, and inventions made by ATI for its products and/or projects.