ATMV24V100V80MA1 ANALOGTECHNOLOGIES | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 7

Technical content

Copyrights 2000-2022, Analog Technologies, Inc. All Rights Reserved. Updated on 6/28/2022 Email: staff@analogti.com/sales@analogti.com 2 Analog Technologies ATMV24V100V80MA1 8W Isolated DC-DC Power Module

DESCRIPTION

This Power Module is a medium voltage, isolated DC −DC converter with 2:1 input voltage range. With a wide operating temperature range, built in short-circuit protection, providing this unit with high reliability and long life. NAMING PRINCIPLE Naming Principle of ATMV24V100V80MA1 Table 1. Pin Names, Functions and Specifications. No. Name Type Description Min. Typ. Max.

1 VIN− Input Negative Input Voltage 0V

2 VIN+ Input Positive Input Voltage 18V 24V 36V

3 VOUT+ Output Positive Output Voltage 100V

4 NP -

5 VOUT− Output Negative Output Voltage 0V

Copyrights 2000-2022, Analog Technologies, Inc. All Rights Reserved. Updated on 6/28/2022 Email: staff@analogti.com/sales@analogti.com 3 Analog Technologies ATMV24V100V80MA1 8W Isolated DC-DC Power Module Parameter Symbol Test Conditions Min. Typ. Max. Unit/Note Output Voltage Ripple VOUT_RP Bandwidth = 20MHz ±1 % Output Short-Circuit Protection Time tSC ≤60 s Switching Frequency fSW VVPS = 24V IOUT = 80mA 125 kHz Line Regulation ∆VOUT/∆VVPS VVPS = 24V IOUT = 80mA ±1 % Load Regulation ∆VOUT/∆IOUT VVPS = 24V Load change from 10% to 100% ±1 % Isolation Voltage VIS 1500 VDC Isolation Resistance VVPS = 18V ~ 36V VOUT = 100V VIS = 1500VDC IOUT = 80mA TA = 25℃ 70%RH 1000 MΩ Isolation Capacitance 1 nF Output Voltage Temperature Coefficient TCVOUT (1) VVPS = 24V IOUT = 80mA 0.03 %/°C Cooling Method Air Cooling Mean Time Between Failure MTBF MIL-HDBK-217F@25°C 1000 Kh Operating Temperature Range Topr −40 85 °C Storage Temperature Range Tstg −40 105 °C Maximum Soldering Temperature on Connection Pins Tsld Soldering Time:10s 300 °C Case Temperature Rise Tcs VVPS = 24V IOUT = 80mA 35 °C Storage Relative Humidity Range RH 95 % Case Material Aluminum External Dimensions (Exclude Connection Pins) 50.8×25.4×10.5 mm 2×1×0.41 inch Weight 25 g 0.055 lbs 0.881 Oz

Figure 5. Derating Curve

Table 3. Recommended Values maximum capacitive load of the product. Figure 6. Outline Dimensions

Copyrights 2000-2022, Analog Technologies, Inc. All Rights Reserved. Updated on 6/28/2022 Email: staff@analogti.com/sales@analogti.com 6 Analog Technologies ATMV24V100V80MA1 8W Isolated DC-DC Power Module

Related Products

MAX. Capacitive Load Typ. Range V mA % μF ATMV12V50V160MA1 12 9 ~ 18 50 160 78 100 ATMV12V100V80MA1 100 80 76 100 ATMV12V200V40MA1 200 40 75 68 ATMV12V300V20MA1 300 20 74 47 ATMV12V400V10MA1 400 10 73 33 ATMV12V500V8MA1 500 8 72 22 ATMV12V600V6.7MA1 600 6.7 70 10 ATMV12V700V4.3MA1 700 4.3 68 4.7 ATMV24V100V80MA1 24 18 ~ 36 100 80 78 100 ATMV24V200V40MA1 200 40 77 68 ATMV24V300V20MA1 300 20 75 47 ATMV24V400V10MA1 400 10 74 33 ATMV24V500V8MA1 500 8 73 22 ATMV24V600V6.7MA1 600 6.7 71 10 ATMV24V700V4.3MA1 700 4.3 70 4.7 ATMV12V50V80MA2 12 9 ~ 18 ±50 ±80 76 68 ATMV12V100V40MA2 ±100 ±40 75 68 ATMV12V150V20MA2 ±150 ±20 74 47 ATMV12V200V10MA2 ±200 ±10 73 33 ATMV12V250V8MA2 ±250 ±8.0 72 22 ATMV12V300V6.6MA2 ±300 ±6.6 70 10 ATMV24V50V80MA2 24 18 ~ 36 ±50 ±80 78 68 ATMV24V100V40MA2 ±100 ±40 77 68 ATMV24V150V20MA2 ±150 ±20 75 47 ATMV24V200V10MA2 ±200 ±10 74 33 ATMV24V250V8MA2 ±250 ±8.0 73 22 ATMV24V300V6.6MA2 ±300 ±6.6 71 10

Copyrights 2000-2022, Analog Technologies, Inc. All Rights Reserved. Updated on 6/28/2022 Email: staff@analogti.com/sales@analogti.com 7 Analog Technologies ATMV24V100V80MA1 8W Isolated DC-DC Power Module NOTICE 1. ATI warrants performance of its produc ts for one year to the specifications applicable at the time of sale, except for those being damaged by excessive abuse. Products found not meeting the specifications within one year from the date of sale can be exchanged free of charge. 2. ATI reserves the right to make changes to its products or to discontinue any product or service without notice, and advise customers to obtain the latest version of rele vant information to verify, before placing orders, that the information being relied on is current and complete. 3. All products are sold subject to the terms and conditions of sale supplied at the time of order acknowledgment, including those pertaining to warranty, patent infringement, and limitation of liability. Testing and other quality control techniques are utilized to the extent ATI deems necessary to support this warranty. Specific testing of all parameters of each device is not necessarily performed, except those mandated by government requirements. 4. Customers are responsible for their applications using ATI products. In order to minimize risks associated with the customers’ applications, adequate design and operating safeguards must be provided by the customers to minimize inherent or procedural hazards. ATI assumes no liability for applications assistance or customer product design. 5. ATI does not warrant or represent that any license, eith er express or implied, is granted under any patent right, copyright, mask work right, or other intellectu al property right of ATI covering or relating to any combination, machine, or process in which such products or services might be or are used. ATI’s publication of information regarding any third party’s products or ser vices does not constitute ATI’s approval, warranty or endorsement thereof. 6. IP (Intellectual Property) Ownership: ATI retains the ow nership of full rights for special technologies and/or techniques embedded in its products, the designs for me chanics, optics, plus all modifications, improvements, and inventions made by ATI for its products and/or projects.