ATM1602B HB | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 11

Technical content

Datasheet sections

User’s Guide ATM1602B Liquid Crystal Display Module

-VSS 0 7.0 Input Voltage Vin VSS VDD V Operating Temperature Range TOP 0 +50 Storage Temperature Range TST -20 +60 *wide Temperature range is available (operating/storage temperature as wide as -20～+70/-30～+80℃)。 Description Of Terminals Pin No. Pin Name Input/ Output External Connection Function

1 VSS — Power VSS:GND

2 VDD — Supply VDD: +5V

3 VO — VLCD adjustment

“0”:Instruction register (when writing) Busy flag & address counter (When r eading) “1”:Data register (when writing & reading)

5 R/W Input MPU Read/write select signal

“0” for writing , “1” for reading

6 E Input MPU Operation (data read/write) enable signal

Low-order lines of data bus with 3 -state, bi-directional function for use in data transaction with the MPU. These lines are not used when interfacing with a 4 -bit microprocessor. DB4-DB7 Input MPU High-order lines of data bus with 3-state, bi-directional function for use in data transactions with the MPU. DB7 may also be used to check the busy flag. LED “+” LED “-” Input LED BACKLIGHT POWER SUPPLY LED“+”VOLTAGE TYPE:4.2V MAX : 4.5V LED“-”: GND

for TN Type Display Module (Ta=25℃, VDD=5.0V±0.25V) Item Symbol Condition Min. Typ. Max. Unit Viewing angle θ Cr≥4 -25 － － deg Φ -30 － 30 Contrast ratio Cr － 2 － － Response time(rise) Tr － － 120 150 ms Response time(fall) Tr － － 120 150 ms for STN Type Display Module (Ta=25℃, VDD=5.0V±0.25V) Item Symbol Condition Min. Typ. Max. Unit Viewing angle θ Cr≥2 -60 － 35 deg Φ -40 － 40 Contrast ratio Cr － 6 － － Response time(rise) Tr － － 150 250 ms Response time(fall) Tr － － 150 250 ms

Electrical Characteristics

Parameter Symbol Conditions Min. Type Max. Unit Supply voltage for LCD VDD－VO TA=25℃ — 4.6 — V Input voltage VDD 4.7 — 5.5 V Supply current IDD VDD=5.0V;TA=25℃ — 1.5 2.5 mA Input leakage current ILKG — — 1.0 μA “H” level input voltage VIH 2.2 — VDD V “L” level input voltage VIL Twice initial value or less 0 — 0.6 V “H” level output voltage VOH LOH= -0.25MA 2.4 — — V “L” level output voltage VOL LOL=1.6MA — — 0.4 V Backlight supply power VF — 4.2 4.5 V

Read Cycle (VDD=5.0V+10%,VSS=OV, Ta=25℃) Parameter Symbol Test pin Min. Type Max. Unit Enable cycle time tc E 500 － － Enable pulse width tw E 300 － － Enable rise/fall time tr, tf E － － 25 RS,R/W setup time tsu RS; R/W 100 － － ns RS.R/W address hold time th RS; R/W 10 － － Read data output delay tD DB0-DB7 60 － 190 Read data hold time tDH DB0-DB7 20 － － Write Cycle Parameter Symbol Test pin Min. Type Max. Unit Enable cycle time tc E 500 － － Enable pulse width tw E 300 － － Enable rise/fall time tr,tf E － － 25 RS,R/W setup time tsu1 RS; R/W 100 － － ns RS,R/W address hold time th1 RS; R/W 10 － － Data setup time t su2 DB0-DB7 60 － － Data hold time t h2 DB0-DB7 10 － －

VDD-Vo: LCD DRIVING VOLTAGE VR: 10K-20KΩ LCD CONTROLLER AND DRIVER LCD PANEL

8 OR 16

+5V VR GND VDD-V0

fosc=250kh z Clear Display 0 0 0 0 0 0 0 0 0 1 1.64ms Cursor home 0 0 0 0 0 0 0 0 1 * 1.64ms Entry Mode Set 0 0 0 0 0 0 0 1 1/D S DB1=1:Increment DB1=0:Decrement DB0=1:The display is shifted DB0=0:The display is not shifted 40μs Display on/off 0 0 0 0 0 0 1 D C B DB2=1:Display on DB2=0: Display off DB1=1:Cursor on DB1=0: Cursor off DB0=1:Brinking on DB0=0: Brinking off 40μs Cursor / Display Shift 0 0 0 0 0 1 S/C R/L * * DB3=1:Shifts display one character DB2=1:Right shift DB2=0:Left shift 40μs System Set 0 0 0 0 1 DL N F * * DB4=1:8 bits DB4=0:4 bits DB3=1:2 lines display (1/16 duty) DB3=0:1 line display DB2=1:5 × 10 dots , 1/11 duty DB2=1:5 ×7 dots , 1/8 duty 40μs Set CG RAM Address 0 0 0 1 CG RAM address corresponds to cursor address The address length that can be set is 64 address 40μs Set DD RAM Address 0 0 1 DD RAM address The address length that can be set is 80 address 40μs Read Busy Flag/Address Counter 0 1 BF Address counter used for both DD&CG RAM address DB7=1:Busy (instruction not accepted) DB7=0:Ready(for instruction) 0μs Write Data 1 0 Write data 46μs Read Data 1 1 Read data 46μs DD RAM Address: 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 Address for line 1 00 01 02 03 04 05 06 07 08 09 A B C D E F Address for line 2 40 41 42 43 44 45 46 47 48 49 4A 4B 4C 4D 4E 4F

1.Reliability Test Evaluations and Assessment* Storage Condition Content Current consumption Oozing Contrast Other appearances Operation at high temperature and humidity 40℃,90% RH,240hrs Twice initial value or less none More than 80% of initial value No abnormality High temperature storage 60℃, 240hrs Twice initial value or less none More than 80% of initial value No abnormality Low temperature storage -20℃, 240hrs Twice initial value or less More than 80% of initial value No abnormality *Evaluations and assessment to be made two hours after returning to room temperature (25 ℃±5℃). *The LCDs subjected to the test must not have dew condensation. 2. Liquid crystal panel service life 50,000 hours minimum at 25±10℃,45±20%RH.

Standard Character Pattern Note: The user can specify any pattern for character -generator RAM.