DATASHEET SEARCH SITE | WWW.ALLDATASHEET.COM
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 22
Technical content
Datasheet sections
- 1 Application
- 2 Features
- 3 Mechanical Specifications
- 4 Mechanical Drawing of TFT-LCD module
- 5 Input Terminals
- 6 Absolute Maximum Ratings
- 7 Electrical Characteristics
- 8 Pixel Arrangement
- 9 Display Color and Gray Scale Reference
- 10 Block Diagram
- 11 Interface Timing
- 12 Power On Sequence
- 13 Optical Characteristics
- 14 Handling Cautions
- 15 Reliability Test
- 16 Packing Diagram
AZ DISPLAYS, INC. COMPLETE LCD SOLUTIONS 5” VGA Very High Brightness TFT‐LCD ATM050AD‐LLV‐BFL (Based on PVI: PD050VL1) COLOR LIQUID CRYSTAL DISPLAY
AZ DISPLAYS, INC. Preliminary Technical Specifications
Revision History
Page:2 Rev. Issued Date Revised
1.0 May 7, 2007 New
2.0 Mar 12, 2008 Delete Page4
- Features: Image Reversion : Up/Down and Left/Right 3.0 March.24.2008 Add Page 19 14.Handling Cautions 14-1 item e) 4.0 Aug. 18,2009 Modified Page 22 16.Packing Diagram
AZ DISPLAYS, INC. Preliminary Technical Specifications 1. General Description ATM050AD-LLV-BFL is a 5” Color Active Matrix Liquid Crystal display with HighBright LED backlight system. The matrix employs amorphous silicon Thin Film Transistor as the active element. It is a transmissive type display operating in the normally white mode. This TFT-LCD has a 5-inch diagonally measured active display area with VGA resolution (640 horizontal by 480 vertical pixel array). Each pixel is divided into Red, Green and Blue sub-pixels or dots which are arranged in vertical stripes. Gray scale or the brightness of the sub-pixel color is determined with a 6-bit gray scale signal for each dot, thus presenting a palette of more than 262,144 colors. ATM050AD-LLV-BFL is intended to support applications where high brightness is a critical factor. In combination with the vertical arrangement of the sub-pixels, the ATM050AD-LLV-BFL characteristics provide an excellent flat panel display for office or industrial automation products or daylight applications. 2. Mechanical Specifications ATM050AD-LLV-BFL Page:4 Parameter Specifications Unit Screen Size 5(diagonal) inch Display Format 640 (R,G,B ) 480 dot Display Colors 262K Active Area 101.76 (H) 74.88(V) mm Pixel Pitch 0.159(H) 0.156(V) mm Pixel Configuration Stripe Outline Dimension 120.7(H) 92.8(V) 12.5(D) (Typ.) mm Back-light TBD Weight 173.6+10 g Surface treatment Anti-glare and SWV film Display mode Normally white Gray scale inversion direction 6 (ref to Note 13-1 ) o’clock
AZ DISPLAYS, INC. Preliminary Technical Specifications 3. Mechanical Drawing of TFT-LCD Module Outline Drawing : Front View (unit mm) ATM050AD-LLV-BFL Page:5
Outline Drawing : Rear View (unit AZ DISPLAYS, INC. ATM050AD-LLV-BFL Page:6
AZ DISPLAYS, INC. 4. Input Terminals 4-1) TFT-LCD Panel Driving Connector type: DFL19K-20P-1H(HRS) LVDS Interface Block Diagram Preliminary Technical Specifications R0~R5 G0~G5 B0~B5 Hsync Vsync DENB TIN0~TIN5 TIN6~TIN11 TIN12~TIN17 TIN18 TIN19 TIN20 IN0- IN0+ IN1- IN1+ IN2- IN2+ RxOUT0~RxOUT5 RxOUT6~RxOUT11 RxOUT12~RxOUT17 RxOUT18 RxOUT19 RxOUT20 CLK IN TCLK IN PLL CLK- CLK+ PLL CLK OUT Customer system side THC63LVDM 63A THC63LVDF64A ATM050AD-LLV-BFL module side ATM050AD-LLV-BFL Page:7 Pin No. Symbol Function Remark 1 Vcc +3.3V Power Supply 2 Vcc +3.3V Power Supply
3 GND Ground
4 GND Ground
5 INO- LVDS receiver signal channel 0
6 INO+ LVDS receiver signal channel 0
7 GND Ground
8 IN1- LVDS receiver signal channel 1
9 IN1+ LVDS receiver signal channel 1
10 GND Ground
11 IN2- LVDS receiver signal channel 2
12 IN2+ LVDS receiver signal channel 2
13 GND Ground
14 CLK- LVDS receiver signal clock
15 CLK+ LVDS receiver signal clock
16 GND Ground
17 NC No connection
18 NC No connection
19 GND Ground
20 GND Ground
AZ DISPLAYS, INC. Preliminary Technical Specifications Recommended Transmitter (THC63LVDM63A Thane) to ATM050AD-LLV-BFL interface Assignment: DENB input signal. If customer wanted to off the DENB mode , you must keep the DENB always High or Low. (tc: the period of sampling clock) ATM050AD-LLV-BFL Page:8 Input terminal of THC63LVDM63A Graphic controller output signal Output signal symbol To PD050VL1 interface terminal (Symbol) Symbol No. Symbol Function TIN0 44 R0 Red pixel data (LSB) Tout0- Tout0+ No.5 : IN0- No.6 : IN0+ TIN1 45 R1 Red pixel data TIN2 47 R2 Red pixel data TIN3 48 R3 Red pixel data TIN4 1 R4 Red pixel data TIN5 3 R5 Red pixel data(MSB) TIN6 4 G0 Green pixel data (LSB) TIN7 6 G1 Green pixel data Tout1- Tout1+ No.8 : IN1- No.9 : IN1+ TIN8 7 G2 Green pixel data TIN9 9 G3 Green pixel data TIN10 10 G4 Green pixel data TIN11 12 G5 Green pixel data(MSB) TIN12 13 B0 Blue pixel data(LSB) TIN13 15 B1 Blue pixel data TIN14 16 B2 Blue pixel data Tout2- Tout2+ No.11 : IN2- N0.12 : IN2+ TIN15 18 B3 Blue pixel data TIN16 19 B4 Blue pixel data TIN17 20 B5 Blue pixel data(MSB) TIN18 22 Hsync Horizontal Synchronous Signal TIN19 23 Vsync VerticalSynchronous Signal TIN20 25 DENB Compound Synchronization signal CLK in 26 CLK Data sampling clock TCLK out- TCLK out+ No.14 : CLK No.15 : CLK
AZ DISPLAYS, INC. Preliminary Technical Specifications 4-2) Backlight driving Connector type: Molex 51004-0200 or equivalent connectors for the LED Backlight 5. Absolute Maximum Ratings The followings are maximum values, which if exceeded, may cause faulty operation or damage to the unit. GND=0V, Ta = 2 5 Note 6-1 : Input signals include CLK , Hsync , Vsync , DENB , R[0:5] , G[0:5] and B[0:5]. 6. Electrical Characteristics 6-1) Recommended Operating Conditions: GND = 0V Ta = 25 Note 6-1 : To test the current dissipation of VCC using the “color bars” testing pattern shown as below 1 2 3 4 5 6 7 8 1. White 2. Yellow 3. Cyan 4. Green 5. Magenta 6. Red 7. Blue 8. Black Idd current dissipation testing pattern Note6-2 : Please refers to THC63LVDF64A specification by THINE Corporation. This LCD module conforms to LVDS standard. ATM050AD-LLV-BFL Page:9 Item Symbol Min. Typ. Max. Unit Remark Supply Voltage Vcc 3.0 3.3 3.6 V Current Dissipation Icc - 77.90 - mA Note 7-1 LVDS Differential input high threshold VTH - - 100 mV Note7-2 LVDS Differential input low threshold VTL -100 - - Vcom Voltage Vcom - 2.7 - V Pin No Symbol Description Remark 1 + Input terminal (Positive electrode side) Wire color : Red/Pink 2 - Input terminal (Ground side) Wire Color : White Parameters Symbol MIN. MAX. Unit Remark Supply Voltage VCC -0.3 +7.0 V Input Signals Voltage Vsig -0.3 VCC+0.3 V Note 6-1
AZ DISPLAYS, INC. Preliminary Technical Specifications 6-2) Recommended driving condition for LED backlight GND = 0V Ta = 25 Note 6-3: The LED driving condition is defined for each LED module. (3 LED Serial) Note 6-4: PLED = VLED1 * ILED1 + VLED2 * ILED2…. + VLED6 * ILED6+VLED7 * ILED7 Anode Cathode 7. Pixel Arrangement The LCD module pixel arrangement is the stripe. ATM050AD-LLV-BFL Page:10 Parameter Symbol Min TYP MAX Unit Remark Supply voltage of LED backlight VLED - 12.0 12.3 V IL = 20 mA Supply current of LED backlight ILED - 270 400 mA Note 7-3 Backlight Power Consumption PLED - 3.2 4.9 W Note 7-4
AZ DISPLAYS, INC. 8. Display Color and Gray Scale Reference Preliminary Technical Specifications ATM050AD-LLV-BFL Page:11 Color Input Color Data Red Green Blue R5 R4 R3 R2 R1 R0 G5 G4 G3 G2 G1 G0 B5 B4 B3 B2 B1 B0 Basic Colors Black 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 Red (63) 1 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 0 0 Green (63) 0 0 0 0 0 0 1 1 1 1 1 1 0 0 0 0 0 0 Blue (63) 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 1 Cyan 0 0 0 0 0 0 1 1 1 1 1 1 1 1 1 1 1 1 Magenta 1 1 1 1 1 1 0 0 0 0 0 0 1 1 1 1 1 1 Yellow 1 1 1 1 1 1 1 1 1 1 1 1 0 0 0 0 0 0 White 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 Red Red (00) 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 Red (01) 0 0 0 0 0 1 Red (02) 0 0 0 0 1 0 Darker Brighter Red (61) 1 1 1 1 0 1 Red (62) 1 1 1 1 1 0 Red (63) 1 1 1 1 1 1 Green Green (00) 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 Green (01) 0 0 0 0 0 1 Green (02) 0 0 0 0 1 0 Darker Brighter Green (61) 1 1 1 1 0 1 Green (62) 1 1 1 1 1 0 Green (63) 1 1 1 1 1 1 Blue Blue (00) 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 Blue (01) 0 0 0 0 0 1 Blue (02) 0 0 0 0 1 0 Darker Brighter Blue (61) 1 1 1 1 0 1 Blue (62) 1 1 1 1 1 0 Blue (63) 1 1 1 1 1 1
AZ DISPLAYS, INC. 9. Block Diagram Preliminary Technical Specifications 10-1) TFT-module Block Diagram THC63LVDF64A ATM050AD-LLV-BFL Page:12
AZ DISPLAYS, INC. 10. Interface Timing 10-1) Timing Parameters Preliminary Technical Specifications ATM050AD-LLV-BFL Page:13 Symbol Min. Typ. Max. Unit Power supply VCC 3.0 3.3 3.6 V CLK Frequency 1/tc - 25 - MHz tc - 40 - ns HSYNC Period Hp - 32 - us - 800 - tc Display period Hdp - 640 - tc Pulse width Hpw - 96 - tc Back-porch Hbp - 46 - tc Front-porch Hfp - 18 - tc Hpw+Hbp - 142 - tc Hsync-CLK Hhc 10 - Tc-10 ns Vsync-Hsync Hvh 0 0 200 tc VSYNC Period Vp - 16.8 - ms - 525 - Hp Display period Vdp - 480 - Hp Pulse width Vpw - 2 - Hp Back-porch Vbp - 33 - Hp Front-porch Vfp - 10 - Hp Vpw+Vbp - 35 - Hp DENB Horizontal scanning period T1 - 800 - tc Horizontal display period T2 - 640 - tc Vertical display period T3 - 480 - T1 Frame cycling period T4 520 525 800 T1 R,G,B CLK-DATA Dcd 10 - - ns DATA-CLK Ddc 8 - - ns
AZ DISPLAYS, INC. 10-2) The Timing Diagram a.1 Input signal range tc Preliminary Technical Specifications R05-R00 G05-G00 B05-B00 DENB a.2 HSYNC timing Hpw HSYNC Hp Dcd Ddc Hbp R,G,B Vaild data a.3 CLK,HSYNC relationship CLK Hhc Hdp Hfp HSYNC a.4 HSYNC, VSYNC relationship ATM050AD-LLV-BFL Page:14
AZ DISPLAYS, INC. a.5 VSYNC timing Preliminary Technical Specifications DENB a.6 DENB timing Line 1 Line 1 Line 2 ATM050AD-LLV-BFL Page:15
AZ DISPLAYS, INC. 11. Power On Sequence 3.0V Preliminary Technical Specifications VCC 3.0V Logic Signal 0.3V Backlight OFF ON OFF 10ms 10ms 1. 0 t1 20ms 2. 0 t2 50ms 3. 0 t3 1s 12. Optical Characteristics 12-1) Specification: Ta=25 ATM050AD-LLV-BFL Page:16 Parameter Symbol Condition MIN. TYP. MAX. Unit Remarks Viewing Angle Horizontal 21, 22 CR 10 55 60 - deg Note 13-1 Vertical 12 35 40 - deg 11 50 55 - deg Contrast Ratio CR At optimized Viewing angle 200 400 - - Note 13-2 Response time Rise Tr =0 - 15 30 ms Note 13-4 Fall Tf - 25 50 ms Brightness L =0 - 1000 - cd/m2 Note 13-3 Uniformity U 70 80 - % Note 13-6 Cross Talk - =0 - - 3.5 % Note 13-7 White Chromaticity x =0 0.28 0.31 0.34 - Note 13-3 y 0.31 0.34 0.37 - LED Life Time +25 - 30,000 - h rs N ote 13-5
AZ DISPLAYS, INC. Preliminary Technical Specifications Note 12-1 : The definitions of viewing angle diagrams : Note 12-2: CR = Luminance when LCD is White Luminance when LCD is Black Contrast Ratio is measured in optimum common electrode voltage. Note 12-3 : Topcon BM-7 (fast) luminance meter 1 field of view is used in the testing (after 20~30 minutes operation). Note 12-4 : The definitions of response time Tr and Tf: 100% 90% 10% White Black White Tr Tf Note 12-5: The “LED Life time “ is defined as the module brightness decrease to 50% original Brightness that the ambient temperature is 25 and ILED =160mA. ATM050AD-LLV-BFL Page:17
YA 100% AZ DISPLAYS, INC. Note 12-6 : The uniformity of LCD is defined as Preliminary Technical Specifications U= The Minimum Brightness of the 9 testing Points The Maximum Brightness of the 9 testing Points Luminance meter : BM-5A or BM-7 fast (TOPCON) Measurement distance : 500 mm +/- 50 mm Ambient illumination : < 1 Lux Measuring direction : Perpendicular to the surface of module The test pattern is white (Gray Level 63). 2 /6 2 /6 Note 12-7: Cross Talk (CTK) = YA-YB YA: Brightness of Pattern A YB: Brightness of Pattern B Luminance meter : BM 5A or BM-7 fast (TOPCON) Measurement distance : 500 mm +/- 50 mm Ambient illumination : < 1 Lux Measuring direction : Perpendicular to the surface of module ATM050AD-LLV-BFL Page:18
AZ DISPLAYS, INC. Preliminary Technical Specifications 13. Handling Cautions 13-1) Mounting of module a) Please power off the module when you connect the input/output connector. b) Please connect the ground pattern of the inverter circuit surely. If the connection is not perfect, some following problems may happen possibly. 1.The noise from the backlight unit will increase. 2.The output from inverter circuit will be unstable. 3.In some cases a part of module will heat. c) Polarizer which is made of soft material and susceptible to flaw must be handled carefully. d) Protective film (Laminator) is applied on surface to protect it against scratches and dirt. e) Please following the tear off direction as figure14-1 to remove the protective film as slowly as possible, so that electrostatic charge can be minimized. 13-2) Precautions in mounting a) When metal part of the TFT-LCD module (shielding lid and rear case) is soiled, wipe it with soft dry cloth. b) Wipe off water drops or finger grease immediately. Long contact with water may cause discoloration or spots. c) TFT-LCD module uses glass, which breaks or cracks easily if dropped or bumped on hard surface. Please handle with care. d) Since CMOS LSI is used in the module. So take care of static electricity and earth yourself when handling. 13-3) Adjusting module a) Adjusting volumes on the rear face of the module have been set optimally before shipment. b) Therefore, do not change any adjusted values. If adjusted values are changed, the specifications described may not be satisfied. 13-4) Others a) Do not expose the module to direct sunlight or intensive ultraviolet rays for many hours. b) Store the module at a room temperature place. c) The voltage of beginning electric discharge may over the normal voltage because of leakage current from approach conductor by to draw lump read lead line around. d) If LCD panel breaks, it is possibly that the liquid crystal escapes from the panel. Avoid putting it into eyes or mouth. When liquid crystal sticks on hands, clothes or feet. Wash it out immediately with soap. e) Observe all other precautionary requirements in handling general electronic components. f) Please adjust the voltage of common electrode as material of attachment by 1 module. ATM050AD-LLV-BFL Page:19
AZ DISPLAYS, INC. Preliminary Technical Specifications Figure 14-1 the way to peel off protective film ATM050AD-LLV-BFL Page:20
AZ DISPLAYS, INC. 14. Reliability Test Preliminary Technical Specifications Ta: ambient temperature [Criteria] In the standard conditions, there is not display function NG issue occurred. (including: line defect ,no image).All the cosmetic specification is judged before the reliability stress. ATM050AD-LLV-BFL Page:21 No Test Item Test Condition
1 High Temperature Storage Test Ta= +90 , 240 hrs
2 Low Temperature Storage Test Ta= -40 , 240 hrs
3 High Temperature Operation Test Ta= +80 , 240 hrs
4 Low Temperature Operation Test Ta= -30 , 240 hrs
5 High Temperature & High Humidity
Operation Test Ta = +60 , 90%RH, 240 hrs
6 Thermal Cycling Test
(non-operating) -30 +80 , 200 Cycles 30 min 30 min
7 Vibration Test
(non-operating) Frequency 10 ~ 55 HZ Amplitude 1 mm Sweep time: 11 mins TestPeriod: 6 Cycles for each direction of X, Y, Z
8 Shock Test
(non-operating) 100G, 6ms Direction: X, Y, Z Cycle: 3 times
9 Electrostatic Discharge Test
(non-operating) 150pF, 330 Air : 15KV ; Contact : 8KV 10 times/point , 9 points/panel face
- Packing Diagram Preliminary Technical Specifications AZ DISPLAYS, INC. ATM050AD-LLV-BFL Page:22