ATF22LV10CZ-25XC

ATF22LV10CZ_10 ATMEL | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 19

Technical content

Features

 3.0V to 5.5V Operating Range  Lowest Power in Its Class  Advanced Low-voltage, Zero-power, Electrically Erasable Programmable Logic Device  “Zero” Standby Power (25µA Maximum) (Input Transition Detection)  Low-voltage Equivalent of Atmel ATF22V10CZ  Ideal for Battery Powered Systems  CMOS- and TTL-compatible Inputs and Outputs  Inputs are 5V Tolerant  Latch Feature Hold Inputs to Previous Logic States  EE Technology – Reprogrammable – 100% Tested  High-reliability CMOS Process – 20-year Data Retention – 10,000 Erase/Write Cycles – 2,000V ESD Protection – 200mA Latch-up Immunity  Commercial and Industrial Temperature Ranges  Dual Inline and Surface Mount Standard Pinouts  Green Package Options (Pb/Halide-free/RoHS Compliant) Available 1. Description The Atmel® ATF22LV10CZ/CQZ is a high-performance CMOS (electrically erasable) programmable logic device (PLD) that utilizes The Atmel proven electrically erasable Flash memory technology and provides 25ns speed with standby current of 25µA maximum. All speed ranges are specified over the 3.0V to 5.5V range for industrial and commercial temperature ranges. The ATF22LV10CZ/CQZ provides a low-voltage and edge-sensing “zero” power CMOS PLD solution with “zero” standby power (5µA typical). The ATF22LV10CZ/CQZ powers down automatically to the zero power mode through The Atmel patented Input Transition Detection (ITD) circuitry when the device is idle. The ATF22LV10CZ/CQZ is capable of operating at supply voltages down to 3.0V. Pin “keeper” circuits on input and output pins hold pins to their previous logic levels when idle, which eliminate static power consumed by pull-up resistors. The “CQZ” combines this low high-frequency ICC of the “Q” design with the “Z” feature. The ATF22LV10CZ/CQZ macrocell incorporates a variable product term architecture. Each output is allocated from 8 to 16 product terms which allows highly complex logic functions to be realized. Two additional product terms are included to provide syn- chronous reset and asynchronous reset. These additional product terms are common to all ten registers and are automatically cleared upon power-up. Register Preload simplifies testing. A security fuse prevents unauthorized copying of programmed fuse patterns. High-performance Electrically Erasable Programmable Logic Device Atmel ATF22LV10CZ Atmel ATF22LV10CQZ 0779M–PLD–7/10

0779M–PLD–7/10 Atmel ATF22LV10C(Q)Z 3. Absolute Maximum Ratings* 4. DC and AC Operating Conditions Ratings” may cause permanent damage to the device. This is a stress rating only and functional operation of the device at these or any other conditions beyond those indicated in the operational sections of this speci- fication is not implied. Exposure to absolute maximum rating conditions for extended periods may affect device reliability. Note: 1. Minimum voltage is -0.6V DC, which may undershoot to - 2.0V for pulses of less than 20ns. Maximum output pin voltage is V CC + 0.75V DC, which may overshoot to 7.0V for pulses of less than 20ns. Voltage on Any Pin with Voltage on Input Pins with Respect to Ground (1) Programming Voltage with (1) Commercial Industrial Operating Temperature (Ambient) 0 C-7 0 C -40 C-8 5 C VCC Power Supply 3.0V - 5.5V 3.0V - 5.5V

0779M–PLD–7/10 Atmel ATF22LV10C(Q)Z

4.1 DC Characteristics

Note: 1. Not more than one output at a time should be shorted. Duration of short circuit test should not exceed 30 sec 2. For DC characterization, the test condition of V CC = Max corresponds to 3.6V 3. Shaded devices are becoming obsolete and replaced with CQZ-30 part in green package offering Symbol Parameter Condition (2) Min Typ Max Units IIL Input or I/O Low Leakage Current 0  VIN  VIL (Max) -10.0 µA IIH Input or I/O High Leakage Current (VCC - 0.2)V  VIN  VCC 10.0 µA ICC Clocked Power Supply Current VCC = Max Outputs Open, f = 15MHz CZ-25(3) Com. 50.0 85.0 mA CZ-25(3) Ind. 55.0 90.0 mA CQZ-30 Com. 18.0 50.0 mA CQZ-30 Ind. 19.0 60.0 mA I SB Power Supply Current, Standby VCC = Max VIN = Max Outputs Open CZ-25(3) Com. 3.0 25.0 µA CZ-25(3) Ind. 4.0 50.0 µA CQZ-30 Com. 3.0 25.0 µA CQZ-30 Ind. 4.0 50.0 µA I OS (1) Output Short Circuit Current VOUT = 0.5V -130.0 mA VIL Input Low Voltage -0.5 0.8 V VIH Input High Voltage 2.0 V CC + 0.75 V VOL Output Low Voltage VIN =V IH or VIL VCC = Min, IOL = 16mA 0.5 V VOH Output High Voltage VIN =V IH or VIL VCCIO = Min, IOH = -2.0mA 2.4 V VOH Output High Voltage I OH = -100 µA V CC - 0.2V V

0779M–PLD–7/10 Atmel ATF22LV10C(Q)Z

4.2 AC Waveforms

4.3 AC Characteristics (1)

Note: 1. See ordering information for valid part numbers 2. Shaded products are becoming obsolete INPUTS, I/O REG. FEEDBACK SYNCH. PRESET CP ASYNCH. RESET REGISTERED OUTPUTS COMBINATORIAL OUTPUTS VALID VALID VALID VALID VALID VALID OUTPUT DISABLED OUTPUT DISABLED tS tH tW tW tP tARtAW tAPtCO tPD tER tEA tEAtER Symbol Parameter -25(2) -30 UnitsMin Max Min Max tPD Input or Feedback to Non-registered Output 3.0 25.0 10.0 30.0 ns tCF Clock to Feedback 13.0 10.0 15.0 ns tCO Clock to Output 2.0 15.0 4.0 20.0 ns tS Input or Feedback Setup Time 15.0 18.0 ns tH Input Hold Time 0 0n s tP Clock Period 25.0 30.0 ns tW Clock Width 12.5 15.0 ns fMAX External Feedback 1/(tS +t CO) Internal Feedback 1/(tS +t CF) No Feedback 1/(tP) 33.3 35.7 40.0 25.0 30.0 33.3 MHz MHz MHz t EA Input to Output Enable 3.0 25.0 10.0 30.0 ns tER Input to Output Disable 3.0 25.0 10.0 30.0 ns tAP Input or I/O to Asynchronous Reset of Register 3.0 25.0 10.0 3.0 ns tSP Setup Time, Synchronous Preset 15.0 20.0 ns tAW Asynchronous Reset Width 25.0 30.0 ns tAR Asynchronous Reset Recovery Time 25.0 30.0 ns tSPR Synchronous Preset to Clock Recovery Time 15.0 20.0 ns

0779M–PLD–7/10 Atmel ATF22LV10C(Q)Z

4.4 Input Test Waveforms

4.4.1 Input Test Waveforms and Measurement Levels

4.4.2 Output Test Loads

Note: Similar competitors devices are specified with slightly different loads. These load differences may affect output signals’ delay and slew rate. Atmel devices are tested with sufficient margins to meet compatible device specification conditions

4.5 Pin Capacitance

Table 4-1. Pin Capacitance (f = 1MHz,T=2 5 C(1)) Note: 1. Typical values for nominal supply voltage. This parameter is only sampled and is not 100% tested

4.6 Power-up Reset

The registers in the Atmel® ATF22LV10CZ/CQZ are designed to reset during power-up. At a point delayed slightly from VCC crossing VRST, all registers will be reset to the low state. The output state will depend on the polarity of the buffer. This feature is critical for state machine initialization. However, due to the asynchronous nature of reset and the uncertainty of how VCC actually rises in the system, the following conditions are required: 1. The V CC rise must be monotonic and start below 0.7V 2. The clock must remain stable during T PR 3. After T PR, all input and feedback setup times must be met before driving the clock pin high

4.7 Preload of Register Outputs

The ATF22LV10CZ/CQZ’s registers are provided with circuitry to allow loading of each register with either a high or a low. This feature will simplify testing since any state can be forced into the registers to control test sequencing. A JEDEC file with preload is generated when a source file with vectors is compiled. Once downloaded, the JEDEC file preload sequence will be done automatically by most of the approved programmers after the programming. Typ Max Units Conditions CIN 5 8 pF V IN =0 V CI/O 6 8 pF V OUT =0 V

0779M–PLD–7/10 Atmel ATF22LV10C(Q)Z 5. Electronic Signature Word There are 64-bits of programmable memory that are always available to the user, even if the device is secured. These bits can be used for user-specific data. 6. Security Fuse Usage A single fuse is provided to prevent unauthorized copying of the Atmel ® ATF22LV10CZ/CQZ fuse patterns. Once programmed, fuse verify and preload are inhibited. However, the 64-bit User Signature remains accessible. The security fuse should be programmed last, as its effect is immediate. 7. Programming/Erasing Programming/erasing is performed using standard PLD programmers. See CMOS PLD Programming Hardware and Software Support for information on software/ programming. Table 7-1. Programming/Erasing 8. Input and I/O Pin Keepers All ATF22LV10CZ/CQZ family members have internal input and I/O pin-keeper circuits. Therefore, whenever inputs or I/Os are not being driven externally, they will maintain their last driven state. This ensures that all logic array inputs and device outputs are at known states. These are relatively weak active circuits that can be easily overridden by TTL-compatible drivers (see input and I/O diagrams below). Figure 8-1. Input Diagram Parameter Description Typ Max Units TPR Power-up Reset Time 600 1000 ns VRST Power-up Reset Voltage 2.3 2.7 V 100K VCC ESD PROTECTION CIRCUIT INPUT

0779M–PLD–7/10 Atmel ATF22LV10C(Q)Z Figure 8-2. I/O Diagram 9. Functional Logic Diagram Description The Functional Logic Diagram describes the Atmel® ATF22LV10CZ/CQZ architecture. The ATF22LV10CZ/CQZ has 12 inputs and 10 I/O macrocells. Each macrocell can be configured into one of four output configurations: active high/low or registered/combinatorial. The universal architecture of the ATF22LV10CZ/CQZ can be programmed to emulate most 24-pin PAL devices. Unused product terms are automatically disabled by the compiler to decrease power consumption. A security fuse, when programmed, protects the contents of the ATF22LV10CZ/CQZ. Eight bytes (64-fuses) of User Signature are accessible to the user for purposes such as storing project name, part number, revision or date. The User Signature is accessible regardless of the state of the security fuse. 100K VCC VCC DATA OE I/O INPUT

0779M–PLD–7/10 Atmel ATF22LV10C(Q)Z Figure 9-1. Functional Logic Diagram Atmel ATF22LV10CZ/CQZ

0779M–PLD–7/10 Atmel ATF22LV10C(Q)Z 0.000 0.500 1.000 1.500 2.000 2.500 3.000 3.500 3.00 3.30 3.60 V CC (V) ATMEL ATF22LV10CZ/CQZ STANDBY CURRENT VS. SUPPLY VOLTAGE (TA = 25°C) ICC (uA) 0.8 0.9 1.0 1.1 1.2 TEMPERATURE (C) NORMALIZED ICC VS. TEMP NORMALIZED ICC 0.000 10.000 20.000 30.000 40.000 50.000 60.000 0 0.5 2.5 5 7.5 10 25 37.5 50 Frequency (MHz) ATMEL ATF22LV10CZ SUPPLY CURRENT VS. INPUT FREQUENCY (VCC = 3.3V, TA = 25°C) ICC (mA) 0.000 5.000 10.000 15.000 20.000 25.000 Frequency (MHz) ATMEL ATF22LV10CQZ SUPPLY CURRENT VS. INPUT FREQUENCY (VCC = 3.3V, TA = 25°C) ICC (mA) -12.0 -10.0 -8.0 -6.0 -4.0 -2.0 0.0 Ioh (mA) SUPPLY VOLTAGE (V) ATMEL ATF22L V10CZ/CQZ SOURCE CURRENT VS. SUPPL Y VOLTAGE (VOH = 2.4V) -14.0 -12.0 -10.0 -8.0 -6.0 -4.0 -2.0 0.0 IOH (mA) VOH (V) ATMEL ATF22L V10C/CZ OUTPUT SOURCE CURRENT VS. OUTPUT VOLTAGE (VCC = 3.3V, TA = 25°C) 32.0 33.0 34.0 35.0 36.0 37.0 38.0 39.0 40.0 IOL (mA) SUPPLY VOLTAGE (V) ATMEL ATF22LV10CZ/CQZ OUTPUT SINK CURRENT VS. SUPPL Y VOLTAGE (VOL = 0.5V) 0.0 20.0 40.0 60.0 80.0 100.0 VOL (V) ATMEL ATF22LV10CZ/CQZ OUTPUT SINK CURRENT VS. OUTPUT VOLTAGE (VCC = 3.3V, TA = 25°C) IOL (mA)

0779M–PLD–7/10 Atmel ATF22LV10C(Q)Z -120.0 -100.0 -80.0 -60.0 -40.0 -20.0 0.0 20.0 INPUT VOLTAGE (V) ATMEL ATF22LV10CZ/CQZ INPUT CLAMP CURRENT VS. INPUT VOLTAGE (VCC = 3.3V, TA = 25°C) INPUT CURRENT (mA) -4.0 -2.0 0.0 2.0 4.0 6.0 8.0 10.0 12.0 14.0 INPUT VOLTAGE (V) ATMEL ATF22L V10CZ/CQZ INPUT CURRENT VS. INPUT VOLTAGE (VCC = 3.3V, TA = 25°C) INPUT CURRENT (µA) 0.8 0.9 1.0 1.1 1.2 SUPPLY VOLTAGE (V) NORMALIZED TPD VS. VCC NORMALIZED TPD 0.8 0.9 1.0 1.1 1.2 TEMPERATURE (C) NORMALIZED TPD VS. TEMP NORMALIZED TPD 0.8 0.9 1.0 1.1 1.2 SUPPLY VOLTAGE (V) NORMALIZED TCO VS. VCC NORMALIZED TCO 0.8 0.9 1.0 1.1 1.2 TEMPERATURE (C) NORMALIZED TCO VS. TEMP NORMALIZED TCO 0.8 0.9 1.0 1.1 1.2 SUPPLY VOLTAGE (V) NORMALIZED TSU VS. VCC NORMALIZED TSU 0.8 0.9 1.0 1.1 1.2 TEMPERATURE (C) NORMALIZED TSU VS. TEMP NORMALIZED TSU

0779M–PLD–7/10 Atmel ATF22LV10C(Q)Z -5.0 0.0 5.0 10.0 15.0 OUTPUT LOADING (PF) ATMEL AT22LV10CZ/CQZ DELTA TPD VS. OUTPUT LOADING DELTA TPD (ns) -5.0 0.0 5.0 10.0 15.0 OUTPUT LOADING (PF) ATMEL AT22LV10CZ/CQZ DELTA TCO VS. OUTPUT LOADING DELTA TCO (ns) -0.7 -0.6 -0.5 -0.4 -0.3 -0.2 -0.1 0.0 NUMBER OF OUTPUTS SWITCHING DELTA TPD VS. # OF OUTPUT SWITCHING DELTA TPD (ns) -0.3 -0.2 -0.2 -0.1 -0.1 0.0 NUMBER OF OUTPUTS SWITCHING DELTA TCO VS. # OF OUTPUT SWITCHING DELTA TCO (ns)

0779M–PLD–7/10 Atmel ATF22LV10C(Q)Z 10. Ordering Information

10.1 Standard Package Options (1)

Notes: 1. Shaded devices are becoming obsolete and replaced with CQZ-30 parts in green product/package options listed below.

10.2 Atmel ATF22LV10CQZ Green Package Options (Pb/Halide-free/RoHS Compliant)

10.3 Using “C” Product for Industrial

To use commercial product for industrial temperature ranges, simply de-rate I CC by 15% on the “C” device. No speed de-rating is necessary. tPD (ns) t S (ns) t CO (ns) Ordering Code Package Operation Range 25 15 15 ATF22LV10CZ-25JC ATF22LV10CZ-25PC ATF22LV10CZ-25SC ATF22LV10CZ-25XC 28J 24P3 24S 24X Commercial (0Ct o7 0C) ATF22LV10CZ-25JI ATF22LV10CZ-25PI ATF22LV10CZ-25SI ATF22LV10CZ-25XI 28J 24P3 24S 24X Industrial (-40Ct o+ 8 5C) ATF22LV10CQZ-30JC ATF22LV10CQZ-30PC ATF22LV10CQZ-30SC ATF22LV10CQZ-30XC 28J 24P3 24S 24X Commercial (0Ct o7 0C) ATF22LV10CQZ-30JI ATF22LV10CQZ-30PI ATF22LV10CQZ-30SI ATF22LV10CQZ-30XI 28J 24P3 24S 24X Industrial (-40Ct o+ 8 5C) tPD (ns) t S (ns) t CO (ns) Ordering Code Package Operating Range 30 15 15 ATF22LV10CQZ-30JU ATF22LV10CQZ-30PU ATF22LV10CQZ-30SU ATF22LV10CQZ-30XU 28J 24P3 24S 24X Industrial (-40Ct o+ 8 5C) Package Type 28J 28-lead, Plastic J-leaded Chip Carrier (PLCC) 24P3 24-pin, 0.300" Wide, Plastic Dual Inline Package (PDIP) 24S 24-lead, 0.300" Wide, Plastic Gull Wing Small Outline (SOIC) 24X 24-lead, 4.4 mm Wide, Plastic Thin Shrink Small Outline (TSSOP)

0779M–PLD–7/10 Atmel ATF22LV10C(Q)Z 11. Packaging Information 11.1 28J – PLCC TITLE DRAWING NO. REV. Package Drawing Contact: packagedrawings@atmel.com B28J, 28-lead, Plastic J-leaded Chip Carrier (PLCC) 28J 10/04/01 1.14(0.045) X 45° PIN NO. 1 IDENTIFIER 1.14(0.045) X 45° 0.51(0.020)MAX 0.318(0.0125) 0.191(0.0075) 45° MAX (3X) A B1 D2/E2 B e E1 E D COMMON DIMENSIONS (Unit of Measure = mm) SYMBOL MIN NOM MAX NOTE Notes: 1. This package conforms to JEDEC reference MS-018, Variation AB. 2. Dimensions D1 and E1 do not include mold protrusion. Allowable protrusion is .010"(0.254mm) per side. Dimension D1 and E1 include mold mismatch and are measured at the extreme material condition at the upper or lower parting line. 3. Lead coplanarity is 0.004" (0.102mm) maximum. A 4.191 – 4.572 A1 2.286 – 3.048 A2 0.508 – – D 12.319 – 12.573 D1 11.430 – 11.582 Note 2 E 12.319 – 12.573 E1 11.430 – 11.582 Note 2 D2/E2 9.906 – 10.922 B 0.660 – 0.813 B1 0.330 – 0.533 e 1.270 TYP

0779M–PLD–7/10 Atmel ATF22LV10C(Q)Z 11.2 24P3 – PDIP TITLE DRAWING NO. REV. Package Drawing Contact: packagedrawings@atmel.com 24P3, 24-lead (0.300"/7.62mm Wide) Plastic Dual Inline Package (PDIP) D 24P3 6/1/04 PIN B E C L SEATING PLANE A D e eB eC COMMON DIMENSIONS (Unit of Measure = mm) SYMBOL MIN NOM MAX NOTE A – – 5.334 A1 0.381 – – D 31.623 – 32.131 Note 2 E 7.620 – 8.255 E1 6.096 – 7.112 Note 2 B 0.356 – 0.559 B1 1.270 – 1.651 L 2.921 – 3.810 C 0.203 – 0.356 eB – – 10.922 eC 0.000 – 1.524 e 2.540 TYP Notes: 1. This package conforms to JEDEC reference MS-001, Variation AF . 2. Dimensions D and E1 do not include mold Flash or Protrusion. Mold Flash or Protrusion shall not exceed 0.25mm (0.010").

0779M–PLD–7/10 Atmel ATF22LV10C(Q)Z 11.3 24S – SOIC P I N1I D PIN 1 06/17/2002 TITLE DRAWING NO. REV. 24S, 24-lead (0.300" body) Plastic Gull Wing Small Outline (SOIC) B24S COMMON DIMENSIONS (Unit of Measure = mm) SYMBOL MIN NOM MAX NOTE A – – 2.65 A1 0.10 – 0.30 D 10.00 – 10.65 D1 7.40 – 7.60 E 15.20 – 15.60 B 0.33 – 0.51 L 0.40 – 1.27 L1 0.23 – 0.32 e 1.27 BSC B DD1 e E A L Package Drawing Contact: packagedrawings@atmel.com

0779M–PLD–7/10 Atmel ATF22LV10C(Q)Z 11.4 24X – TSSOP 0.30(0.012) 0.19(0.007) 4.48(0.176) 4.30(0.169) 6.50(0.256) 6.25(0.246) 0.65(0.0256)BSC 7.90(0.311) 7.70(0.303) 0.15(0.006) 0.05(0.002) 0.20(0.008) 0.09(0.004) 0.75(0.030) 0.45(0.018) 1.20(0.047)MAX Dimensions in Millimeter and (Inches)* JEDEC STANDARD MO-153 AD Controlling dimension: millimeters PIN 1 04/11/2001 TITLE DRAWING NO. REV. 24X, 24-lead (4.4mm body width) Plastic Thin Shrink Small Outline Package (TSSOP) A24X Package Drawing Contact: packagedrawings@atmel.com

0779M–PLD–7/10 Atmel ATF22LV10C(Q)Z 12. Revision History Doc. Rev. Date Comments M 07/2010 Atmel ATF22LV10CZ-25JC/JI, PC/PI, SC/SI, XC/XJ leaded parts will become obsolete L 11/2005 Added Green Package options

0779M–PLD–7/10 Headquarters International Atmel Corporation

2325 Orchard Parkway

San Jose, CA 95131 USA www.atmel.com Atmel Asia Limited Unit 01-5 & 16, 19/F BEA Tower, Millennium City 5

418 Kwun Tong Road

Kwun Tong, Kowloon HONG KONG Tel: (+852) 2245-6100 Fax: (+852) 2722-1369 Atmel Munich GmbH Business Campus Parkring 4 D-85748 Garching b. Munich GERMANY Fax: (+49) 89-3194621 Atmel Japan 9F, Tonetsu Shinkawa Bldg. 1-24-8 Shinkawa Chuo-ku, Tokyo 104-0033 JAPAN Product Contacts Technical Support pld@atmel.com Sales Contact www.atmel.com/contacts Literature Requests www.atmel.com/literature Disclaimer: The information in this document is provided in connection with Atmel products. No license, express or implied, by estoppel or otherwise, to any intellectual property right is granted by this document or in connection with the sale of Atmel products. EXCEPT AS SET FORTH IN ATMEL’S TERMS AND CONDI- TIONS OF SALE LOCATED ON ATMEL’S WEB SITE, ATMEL ASSUMES NO LIABILITY WHATSOEVER AND DISCLAIMS ANY EXPRESS, IMPLIED OR STATUTORY WARRANTY RELATING TO ITS PRODUCTS INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTY OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, OR NON-INFRINGEMENT. IN NO EVENT SHALL ATMEL BE LIABLE FOR ANY DIRECT, INDIRECT, CONSEQUENTIAL, PUNITIVE, SPECIAL OR INCIDEN- TAL DAMAGES (INCLUDING, WITHOUT LIMITATION, DAMAGES FOR LOSS OF PROFITS, BUSINESS INTERRUPTION, OR LOSS OF INFORMATION) ARISING OUT OF THE USE OR INABILITY TO USE THIS DOCUMENT, EVEN IF ATMEL HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. Atmel makes no representations or warranties with respect to the accuracy or completeness of the contents of this document and reserves the right to make changes to s pecifications and product descriptions at any time without notice. Atmel does not make any commitment to update the information contained herein. Unless specifica lly provided otherwise, Atmel products are not suitable for, and shall not be used in, automotive applications. Atmel’s products are not intended, authorized, or warranted for use as components in applications intended to support or sustain life. © 2010 Atmel Corporation . All rights reserved. Atmel ®, logo and combinations thereof, Everywhere You Are ® and others, are registered trademarks or trademarks of Atmel Corporation or its subsidiaries. Other terms and product names may be trademarks of others.