ATF-501P8 AVAGO | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 22

Technical content

Features

  • Single voltage operation
  • High Linearity and P1dB
  • Low Noise Figure
  • Excellent uniformity in product specifications
  • Small package size: 2.0 x 2.0 x 0.75 mm3
  • Point MTTF > 300 years[2]
  • MSL-1 and lead-free
  • Tape-and-Reel packaging option available Specifications
  • 2 GHz; 4.5V, 280 mA (Typ.)
  • 45.5 dBm Output IP3
  • 29 dBm Output Power at 1dB gain compression
  • 1 dB Noise Figure
  • 15 dB Gain
  • 14.5 dB LFOM[4]
  • 65% PAE
  • 23oC/W thermal resistance

Applications

  • Front-end LNA Q2 and Q3, Driver or Pre-driver Amplifier for Cellular/PCS and WCDMA wireless infrastructure
  • Driver Amplifier for WLAN, WLL/RLL and MMDS
  • General purpose discrete E-pHEMT for other high linearity applications Pin Connections and Package Marking Note: Package marking provides orientation and identification: “0P” = Device Code “x” = Date code indicates the month of manufacture. Notes: 1. Enhancement mode technology employs a single positive V gs, eliminating the need of negative gate voltage associated with conventional depletion mode devices. 2. Refer to reliability datasheet for detailed MTTF data. 3. Conforms to JEDEC reference outline MO229 for DRP-N. 4. Linearity Figure of Merit (LFOM) is essentially OIP3 divided by DC bias power. Pin 1 (Source) Pin 2 (Gate) Pin 3 Pin 4 (Source) Pin 8 Pin 7 (Drain) Pin 6 Pin 5 0Px Top View Pin 8 Source (Thermal/RF Gnd) Pin 7 (Drain) Pin 6 Pin 5 Pin 1 (Source) Pin 2 (Gate) Pin 3 Pin 4 (Source) Bottom View Attention: Observe precautions for handling electrostatic sensitive devices. ESD Machine Model (Class A) ESD Human Body Model (Class 1C) Refer to Avago Application Note A004R: Electrostatic Discharge Damage and Control.

TA = 25°C, DC bias for RF parameters is Vds = 4.5V and Ids = 280 mA unless otherwise specified. Symbol Parameter and Test Condition Units Min. Typ. Max.

  1. Measurements at 2 GHz obtained using production test board described in Figure 2 while measurement at 0.9GHz obtained from load pull
  2. i ) 2 GHz OIP3 test condition: F1 = 2.0 GHz, F2 = 2.01 GHz and Pin = -5 dBm per tone.

ii ) 900 MHz OIP3 test condition: F1 = 900 MHz, F2 = 910 MHz and Pin = -5dBm per tone.

  1. Use proper bias, board, heatsinking and derating designs to ensure max channel temperature is not exceeded.

See absolute max ratings and application note for more details. Figure 6. Block diagram of the 2 GHz production test board used for NF , Gain, OIP3 , P1dB and PAE measurements at 2 GHz. This circuit achieves a trade-off between optimal OIP3, P1dB and VSWR. Circuit losses have been de-embedded from actual measurements.

50 Ohm

Figure 7. Simplified schematic of production test board. Primary purpose is to show 15 Ohm series resistor placement in gate supply. Transmission line tapers, tee intersections, bias lines and parasitic values are not shown.

15 Ohm

110 Ohm

  1. S parameter is measured on a microstrip

plane is at the end of the drain lead. Figure 56. MSG/MAG & |S21|2 vs. Frequency at

  1. S parameter is measured on a microstrip

plane is at the end of the drain lead. Figure 57. MSG/MAG & |S21|2 vs. Frequency at

  1. S parameter is measured on a microstrip

plane is at the end of the drain lead. Figure 58. MSG/MAG & |S21|2 vs. Frequency at

  1. S parameter is measured on a microstrip

plane is at the end of the drain lead. Figure 59. MSG/MAG & |S21|2 vs. Frequency at

  1. S parameter is measured on a microstrip

plane is at the end of the drain lead. Figure 60. MSG/MAG & |S21|2 vs. Frequency at

  1. S parameter is measured on a microstrip

plane is at the end of the drain lead. Figure 61. MSG/MAG & |S21|2 vs. Frequency at

  1. S parameter is measured on a microstrip

plane is at the end of the drain lead. Figure 62. MSG/MAG & |S21|2 vs. Frequency at

  1. S parameter is measured on a microstrip

plane is at the end of the drain lead. Figure 63. MSG/MAG & |S21|2 vs. Frequency at

  1. S parameter is measured on a microstrip

plane is at the end of the drain lead. Figure 64. MSG/MAG & |S21|2 vs. Frequency at

2 x 2 LPCC (JEDEC DFP-N) Package Dimensions

Ordering Information

Part Number No. of Devices Container ATF-501P8-TR1 3000 7” Reel ATF-501P8-TR2 10000 13”Reel ATF-501P8-BLK 100 antistatic bag Device Models Refer to Avago’s Web Site www.Avagotech.com/view/rf D E A P e pin1 R L b DIMENSIONS ARE IN MILLIMETERS DIMENSIONS MIN. 0.70

0.203 REF

0.225 1.9 0.65 1.9 1.45

0.50 BSC

0.2 NOM. 0.75 0.02 0.25 2.0 0.80 2.0 1.6 0.25

0.4 REF

MAX. 0.80 0.05 0.275 2.1 0.95 2.1 1.75 0.3 SYMBOL A b D E e P L pin1 0PX Top View End ViewEnd View Bottom View A A1

PCB Land Pattern and Stencil Design USER FEED DIRECTION COVER TAPE CARRIER TAPE REEL 8 mm 4 mm 0PX0PX0PX0PX 2.80 (110.24) 0.70 (27.56) 0.25 (9.84) 0.25 (9.84) 0.50 (19.68) 0.28 (10.83) 0.60 (23.62) f0.20 (7.87) PIN 1 Soldermask RF transmission line 0.80 (31.50) 0.15 (5.91) 0.55 (21.65) 1.60 (62.99) 2.72 (107.09) 0.63 (24.80) 0.22 (8.86) 0.32 (12.79) 0.50 (19.68) 0.25 (9.74) 0.63 (24.80) Stencil Layout (top view)PCB Land Pattern (top view) Notes: Typical stencil thickness is 5 mils. Measurements are in millimeters (mils). 0.72 (28.35) PIN 1 1.54 (60.61)

For product information and a complete list of distributors, please go to our web site: www.avagotech.com Avago, Avago Technologies, and the A logo are trademarks of Avago Technologies in the United States and other countries. Data subject to change. Copyright © 2005-2009 Avago Technologies. All rights reserved. Obsoletes 5988-9767EN AV02-1846EN - March 27, 2009 P0P F W E

10 Max

DESCRIPTION SYMBOL SIZE (mm) SIZE (inches) LENGTH WIDTH DEPTH PITCH BOTTOM HOLE DIAMETER P 2.30 ± 0.05 2.30 ± 0.05 1.00 ± 0.05 4.00 ± 0.10 1.00 + 0.25 0.091 ± 0.004 0.091 ± 0.004 0.039 ± 0.002 0.157 ± 0.004 0.039 + 0.002 CAVITY DIAMETER PITCH POSITION D E 1.50 ± 0.10 4.00 ± 0.10 1.75 ± 0.10 0.060 ± 0.004 0.157 ± 0.004 0.069 ± 0.004 PERFORATION WIDTH THICKNESS W 8.00 + 0.30 0.254 ± 0.02 0.315 ± 0.012 8.00 – 0.10 0.315 ± 0.004 0.010 ± 0.0008 CARRIER TAPE CAVITY TO PERFORATION (WIDTH DIRECTION) CAVITY TO PERFORATION (LENGTH DIRECTION) F 3.50 ± 0.05 2.00 ± 0.05 0.138 ± 0.002 0.079 ± 0.002 DISTANCE WIDTH TAPE THICKNESS C Tt 5.4 ± 0.10 0.062 ± 0.001 0.205 ± 0.004 0.0025 ± 0.0004 COVER TAPE D + + Tt