ATE-R23-30W TOPLITE | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 10

Technical content

MODEL：ATE-R23-30W TOPLITE INTERNATIONAL LLC. www.topliteusa.com TOPLITE TOP L I T E

ATE-R23-38W <FOR TOPLITE COB MODULE> 1 / 9 A/1 ATE-R23-38W SERIES Revision issued in 2014. 1. PRODUCT APPEARANCE 2. OUTLINE DRAWING 1±0.05 1.5±0.1 23±0.2 TE-R23-B TC X14 V- Unit：mm Tolerance：±0.25 TOP L I T E

ATE-R23-38W <FOR TOPLITE COB MODULE> 2 / 9 A/1 ATE-R23-38W SERIES Revision issued in 2014. 3. PERFORMANCE PARAMETERS 3-1. ABSOLUTE MAXIMUM RATINGS ITEM SYMBOL RATING UNIT Power Dissipation P 49.89 W Forward Current IF 1260 mA Reverse V oltage VR 60 V Operating Temperature T opr - 30 ～ + 80 ℃ Storage Temperature T stg - 40 ～ + 100 ℃ Junction Temperature T jmax 110 ℃ Note： *1. Forward Current allows maximum surge current ≤ 10ms. *2. Power dissipation and forward current are the values when the LED is used within the range of the derating curve in this data sheet. TOP L I T E

ATE-R23-38W <FOR TOPLITE COB MODULE> 3 / 9 A/1 ATE-R23-38W SERIES Revision issued in 2014. 3-2. ELECTRICAL-OPTICAL CHARACTERISTICS (Tc=25℃) ** PARAMETER SYMBOL CONDITION MIN. TYP. MAX. UNIT common Forward Voltage *1 V F IF=840mA 34 36 39.6 V Beam Angle Deg — 120 — Deg W Color Temp. TC IF=840mA 2870 3045 3220 K Color Rendering Index *3 Ra 80 — — — W1 Luminous Flux *2 Φ 3000 3170 — lm Luminous Efficiency η 100 105 — lm/W W2 Luminous Flux *2 Φ 3200 3322 — lm Luminous Efficiency η 106 110 — lm/W D Color Temp. T C IF=840mA 4745 5028 5311 K Color Rendering Index *3 Ra 80 — — — D1 Luminous Flux *2 Φ 3360 3510 — lm Luminous Efficiency η 112 117 — lm/W D2 Luminous Flux *2 Φ 3540 3690 — lm Luminous Efficiency η 118 123 — lm/W C Color Temp. TC IF=840mA 6020 6530 7040 K Color Rendering Index *3 Ra 80 — — — C1 Luminous Flux *2 Φ 3600 3720 — lm Luminous Efficiency η 120 124 — lm/W C2 Luminous Flux *2 Φ 3750 3840 — lm Luminous Efficiency η 125 128 — lm/W (Note) Parameters is formulated based on shipping samples *1. After 20 ms drive, Measurement tolerance: ± 3 % *2. Monitored by TOPLITE's 1 m integrating sphere, after 20 ms drive, Measurement tolerance: ± 10 % *3. Monitored by TOPLITE's 1 m integrating sphere, after 20 ms drive, Measurement tolerance:± 2 TOP L I T E

ATE-R23-38W <FOR TOPLITE COB MODULE> 4 / 9 A/1 ATE-R23-38W SERIES Revision issued in 2014. 3-3. Characteristics diagram (TYP.) Forward Votage VF [V] Case Temperature Vs. Forward Votage Case Temperature Tc[°C]Case Temperature Tc[°C] Case Temperature Vs. Relative Luminous Flux Relative Luminous Flux[%] Forward Current IF[mA] Forward Votage Vf[V] Forward Votage Vs. Forward Current Forward Current IF [mA] Relative Luminous Flux[%] Forward Current Vs.Relative Luminous Flux TOP L I T E

ATE-R23-38W <FOR TOPLITE COB MODULE> 5 / 9 A/1 ATE-R23-38W SERIES Revision issued in 2014. 4. RELIABILITY The reliability of products shall be satisfied with items listed below. 4-1. TEST ITEMS AND TEST CONDITIONS NO. TEST ITEM TEST CONDITIONS RESULT

1 Continuous operation test

Ta = 25℃, IF = 840mA × 1000 hours(with Al fin) PASS Ta = 80℃, T j≒120℃, IF =840mA × 1000 hours(with Al fin)

2 Low temperature storage Ta =-40℃×1000 hours PASS

3 High temperature storage T a =100℃×1000 hours PASS

4 Moisture resistance T a =60℃, 90%RH for 1000 hours PASS

5 Thermal shock Ta =-40℃×30minutes～100℃×30minutes, 100

4-2. FAILURE CRITERIA NO. PARAMETER SYMBOL FAILURE CRITERIA 1 Forward Voltage V F V F ＞ Initial value × 1.1 2 Luminous Flux Φ Ф ＜ Initial value × 0.7 TOP L I T E

ATE-R23-38W <FOR TOPLITE COB MODULE> 6 / 9 A/1 ATE-R23-38W SERIES Revision issued in 2014. 5. CHROMATICITY COORDINATES REGIONAL 5-1. 3000K CHROMATICITY COORDINATES (Tolerance: x,y ± 0.005) (IF =840mA, Tc= 25℃) Range Chromaticity coordinates NO.1 NO.2 NO.3 NO.4 CENTER * The percentage of each rank in the shipment shall be determined by TOPLITE. Chromaticity Diagram Note: The tolerance of measurement at our tester is VF±3% , Dv±10% , Chromaticity(x,y)±0.005. TOP L I T E

ATE-R23-38W <FOR TOPLITE COB MODULE> 7 / 9 A/1 ATE-R23-38W SERIES Revision issued in 2014. 5-2. 5000K CHROMATICITY COORDINATES (Tolerance: x,y ± 0.005) (IF =840mA, Tc= 25℃) Range Chromaticity coordinates NO.1 NO.2 NO.3 NO.4 CENTER * The percentage of each rank in the shipment shall be determined by TOPLITE. Chromaticity Diagram Note: The tolerance of measurement at our tester is VF±3% , Dv±10% , Chromaticity(x,y)±0.005. TOP L I T E

ATE-R23-38W <FOR TOPLITE COB MODULE> 8 / 9 A/1 ATE-R23-38W SERIES Revision issued in 2014. 5-3. 6500K CHROMATICITY COORDINATES (Tolerance: x,y ± 0.005) (IF =840mA, Tc= 25℃) Range Chromaticity coordinates NO.1 NO.2 NO.3 NO.4 CENTER * The percentage of each rank in the shipment shall be determined by TOPLITE. Chromaticity Diagram Note: The tolerance of measurement at our tester is VF±3% , Dv±10% , Chromaticity(x,y)±0.005. TOP L I T E

ATE-R23-38W <FOR TOPLITE COB MODULE> 9 / 9 A/1 ATE-R23-38W SERIES Revision issued in 2014. 6. USE STANDARD & PRECAUTIONS Before use toplite COB product, carefully read the specifications; Handling with care for this product Never touch the optical surface with finger or sh arp object. The LED surface could be soiled or damaged, which could affect the optical performance of the LED. Do not apply direct pressure on the optical surface. Do not touch the resin with tweezers to avoid scratching or other damage. In work environment, please keep handling the LEDs with appropriate ESD grounding. because this is a semiconductor product. Please take adequate measures to prevent any static electricity being produced:such as the wearing of a wristband or anti-static gloves when handling this product. TOP L I T E