AT5558N-GRE

AT5558 AIMTRON | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 13

Technical content

Features

• Independent 5-Channel H-Bridge
• Built-in 4 constant voltage drivers, all of those drivers with brake function.
• Built-in 1 constant current drivers with brake function.
• Low on-resistance <1.20Ω (typ.)
• Low Voltage operation
• Built-in Thermal Shutdown Function
• QFN-32 Package General Description The AT5558 is a 5-channel H-bridge drivers IC for DSC motor application. It built in with 4 constant voltage drivers and 1 constant current block to drive auto-focus, zoom, shutter, auto-exposure motors.

Applications

• DSC motor Driver * Protected by U.S. Patent #6,943,514 Block Diagram Thermal Shutdown and UVLO VCC VM1 OUT1A OUT1B OUT2A OUT2B PGND1 VM2 OUT3A OUT3B OUT4A OUT4B IN2A IN1A IN2B IN1B PGND2 IN5A IN5B IN4A IN3A IN4B IN3B VC3 Vref VC4 VC12 Logic Block VM3 OUT5A OUT5B Vref Pre Driver RFG H-Bridge H-Bridge H-Bridge H-Bridge H-Bridge VC5 AGND Aimtron reserves the right without notice to change this circuitry and specifications.

Preliminary Product Information 5-Channel DSC Motor Driver Tel: 886-3-563-0878 Fax: 886-3-563-0879 WWW: http://www.aimtron.com.tw 06/10/05 REV:1.1 Email: service@aimtron.com.tw Pin Configuration RFG VC5 VREF PS IN4A IN5A IN5B IN4B VCC VC4 VC3 VC12 AGND OUT1B OUT1A VM1 IN2B IN1B IN1A OUT3B OUT5A OUT5B VM3 OUT4A OUT4B VM2 OUT3A OUT2B IN2A IN3A IN3B OUT2A Exposed PAD* *The exposed pad must be connected to GND.

Ordering Information

AT5558N_GRE QFN32, Green AT5558N

Preliminary Product Information 5-Channel DSC Motor Driver Tel: 886-3-563-0878 Fax: 886-3-563-0879 WWW: http://www.aimtron.com.tw 06/10/05 REV:1.1 Email: service@aimtron.com.tw Pin Description Pin NO. Symbol I/O

Description

I Voltage for current limit control of the constant current driver5 VREF O Reference voltage being divided for VC12, 3, 4, 5 to individually use PS I Power save which can force all outputs to become open state VCC P Power supply IN4A I It combines IN4A to decide the state of the constant current driver4 IN4B I It combines IN4B to decide the state of the constant voltage driver4 IN5A I It combines IN5A to decide the state of the constant current driver5 IN5B I It combines IN5B to decide the state of the constant current driver5 RFG O Voltage for current limit control of the constant current driver5 OUT5A O H-bridge output terminal 5A of the constant voltage driver5 OUT5B P H-bridge output terminal 5B of the constant voltage driver5 VM3 P Power supply for channel 5 OUT4A O H-bridge output terminal 4A of the constant voltage driver4 OUT4B O H-bridge output terminal 4B of the constant voltage driver4 VM2 P Power supply for channel3, 4 OUT3A O H-bridge output terminal 3A of the constant voltage driver3 OUT3B O H-bridge output terminal 3B of the constant voltage driver3 IN1A I It combines IN1A to decide the state of the constant voltage driver1 IN1B I It combines IN1B to decide the state of the constant voltage driver1 IN2A I It combines IN2A to decide the state of the constant voltage driver2 IN2B I It combines IN2B to decide the state of the constant voltage driver2 IN3A I It combines IN3A to decide the state of the constant voltage driver3 IN3B I It combines IN3B to decide the state of the constant voltage driver3 OUT2A O H-bridge output terminal 2A of the constant voltage driver2 OUT2B O H-bridge output terminal 2B of the constant voltage driver2 VM1 P Power supply for channel 1, 2 OUT1A O H-bridge output terminal 1A of the constant voltage driver1 OUT1B O H-bridge output terminal 1B of the constant voltage driver1 AGND G GND VC12 I It is used to control the output voltage of constant voltage driver1, 2 VC3 I It is used to control the output voltage of constant voltage driver3 VC4 I It is used to control the output voltage of constant voltage driver4 Bottom PGND1, 2 G GND

Preliminary Product Information 5-Channel DSC Motor Driver Tel: 886-3-563-0878 Fax: 886-3-563-0879 WWW: http://www.aimtron.com.tw 06/10/05 REV:1.1 Email: service@aimtron.com.tw Absolute Maximum Ratings Item Symbol Ratings Unit Supply voltage VCC VCC +6.0 V Supply voltage VM VM +6.0 V Control input voltage VIN VCC V Power dissipation Pd 1000 mW Operating temperature Topr -20 ~ +85 ° C Junction temperature Tj ~ +150 ° C Storage temperature range Tstg -55 ~ +150 ° C Maximum output current Iout 800 mA HBM KV ESD Susceptibility *2 MM 200 V 1. Stresses beyond those listed under “Absolute Maximum Ratings” may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated in the operational sections of the specifications is not implied. Exposure to absolute maximum rating conditions for extended periods may affect device reliability. 2. Device are ESD sensitive. Handling precaution recommended. The Human Body model is a 100pF capacitor discharged through a 1.5KΩ resistor into each pin. Recommended Operating Conditions(Ta=25°C) Item Symbol Ratings Unit Supply voltage VCC VCC +2.5 ~ +5.5 V Supply voltage VM1,2,3 VM1,2,3 +1.9 ~ +5.5 V Control input voltage VIN 0 ~ VCC V H Bridge output current Iout -400 ~ +400 mA Logic input frequency Fin 0 ~ 100 kHz

Preliminary Product Information 5-Channel DSC Motor Driver Tel: 886-3-563-0878 Fax: 886-3-563-0879 WWW: http://www.aimtron.com.tw 06/10/05 REV:1.1 Email: service@aimtron.com.tw Electrical Characteristic (Ta=25 C , VCC=3.0V, VM1=VM2=VM3=5V, R R R R Ω R L5 Values Parameter Symbol Condition Min. Typ. Max. Unit Whole circuits Circuit current1 at standby ICCST PS=L A µ Circuit current1 at standby IVMST PS=L A µ Circuit current1 ICC1 PS=H, IN1A1B~5A5B=L 0.6 1.5 mA Circuit current2 ICC2 PS=H, IN1A or IN1B or IN2A or IN2B=H 1.0 1.5 mA Circuit current3 ICC3 PS=H, IN3A or IN3B or IN4A or IN4B=H 1.0 1.5 mA Circuit current4 ICC4 PS=H, IN5A or IN5B=H 1.0 1.5 mA Circuit current5 ICC5 PS=H,IN1A=IN2A=IN3A=IN4A =IN5A=H or IN1B=IN2B=IN3B=IN4B=IN5B 1.0 1.5 mA Power save H level input voltage VPSH 2.0 V L level input voltage VPSL 0.8 V H level input bias current IPSH PS=3V A µ L level input bias current IPSL PS=0V A µ Pull-down resistance RIN 1.5 Ω M Control input H level input voltage VINH 2.0 V L level input voltage VINL 0.8 V H level input bias current IINH VIN=3V A µ L level input bias current IINL VIN=0V A µ Pull-down resistance RIN 1.5 Ω M UVLO UVLO voltage VUVLO 1.8 2.0 2.2 V Vref VREF output voltage VREF Iout=0 ~ 1mA 0.98 1.00 1.02 V Constant voltage driver1, 2 Output ON Resistance RON Io=+-200mA, Sum of on-resistance 1.20 1.75 Ω Output constant voltage VO1 VC12=0.3V, Rload=7.5Ω 1.40 1.50 1.60 V

Preliminary Product Information 5-Channel DSC Motor Driver Tel: 886-3-563-0878 Fax: 886-3-563-0879 WWW: http://www.aimtron.com.tw 06/10/05 REV:1.1 Email: service@aimtron.com.tw Constant voltage driver3, 4 Output ON Resistance RON Io=+-200mA, Sum of on-resistance 1.20 1.75 Ω Output constant voltage VO2 VC3=VC4=0.3V, Rload=7.5Ω 1.40 1.50 1.60 V Constant current driver5 Output ON Resistance RON Io=+-300mA, Sum of on-resistance 1.00 1.45 Ω Output Limit voltage VOL RFG=1Ω, VC5=0.3V 287 300 313 mV Thermal Protection Circuit Protection Temperature TSD 150

Preliminary Product Information 5-Channel DSC Motor Driver Tel: 886-3-563-0878 Fax: 886-3-563-0879 WWW: http://www.aimtron.com.tw 06/10/05 REV:1.1 Email: service@aimtron.com.tw Input-output logic table Constant-voltage or saturation control (Channel 1, 2) Input Output IN1A IN1B IN2A IN2B OUT1A OUT1B OUT2A OUT2B Mode L L L L Z Z Z Z Standby H L L L H L Z Z H L H L H L H L L L H L Z Z H L L H H L L H H L L H L L L H Z Z L H L H L H L H L L L H Z Z L H H L L H H L L H 1,2 phase excitation H H L L H H L L BRAKE Constant-voltage or saturation control (Channel 3, 4) Input Output IN3A IN3B IN4A IN4B OUT3A OUT3B OUT4A OUT4B Mode L L L L Z Z Z Z Standby H L L L H L Z Z H L H L H L H L L L H L Z Z H L L H H L L H H L L H L L L H Z Z L H L H L H L H L L L H Z Z L H H L L H H L L H 1,2 phase excitation H H L L H H L L BRAKE Constant-current control or saturation control (Channel 5) Input Output Mode IN5A IN5B OUT5A OUT5B L L Z Z Standby H L H L L H L H SH&AE H H L L BRAKE

Preliminary Product Information 5-Channel DSC Motor Driver Tel: 886-3-563-0878 Fax: 886-3-563-0879 WWW: http://www.aimtron.com.tw 06/10/05 REV:1.1 Email: service@aimtron.com.tw Application reference 1 M_VCC=4V MCU 75k 22k 43k 51k 0.1uF IN2A IN1A IN2B IN1B IN5A IN5B IN4A IN3A IN4B IN3B PS VCC AGND OUT1A OUT1B OUT2A OUT2B OUT3A OUT3B OUT4A OUT4B OUT5A OUT5B VM1 AT5558 VC3 Vref VC4 VC12 VC5 RFG 0.1uF Aperture AF Zoom Shutter VM2 VM3 47uF PS : H active L stand-by PGND1 PGND2 M 0.01~0.1uF (option) 0.01~0.1uF (option) osicllation preventive capacitor 0.01~0.1uF (option) 0.01~0.1uF (option) 0.01~0.1uF (option) Saturation mode ：CH1&CH2&CH4 → i O ON i O I R VM V 1 , i Constant voltage ：CH3→ O ON C O I R V V Constant current：CH5→ RFG V I C O 5 =

Preliminary Product Information 5-Channel DSC Motor Driver Tel: 886-3-563-0878 Fax: 886-3-563-0879 WWW: http://www.aimtron.com.tw 06/10/05 REV:1.1 Email: service@aimtron.com.tw Application reference 2 M_VCC=5V MCU 75k 20k 25k 91k 0.1uF IN2A IN1A IN2B IN1B IN5A IN5B IN4A IN3A IN4B IN3B PS VCC AGND OUT1A OUT1B OUT2A OUT2B OUT3A OUT3B OUT4A OUT4B OUT5A OUT5B VM1 AT5558 VC3 Vref VC4 VC12 VC5 RFG 0.1uF Iris AF Zoom Shutter VM2 VM3 47uF PS : H active L stand-by PGND1 PGND2 M 0.01~0.1uF (option) 0.01~0.1uF (option) osicllation preventive capacitor 0.01~0.1uF (option) 0.01~0.1uF (option) 0.01~0.1uF (option) 3.3k 100k 3.3k 100k Constant voltage ：CH1&CH2→ i O ON C i O I R V V i CH3&CH4→ i O ON i C i O I R V V i Constant current：CH5→ RFG V I C O 5 =

Preliminary Product Information 5-Channel DSC Motor Driver Tel: 886-3-563-0878 Fax: 886-3-563-0879 WWW: http://www.aimtron.com.tw 06/10/05 REV:1.1 Email: service@aimtron.com.tw Application reference 3 M_VCC=5V MCU 75k 33k 0.1uF 1.8 IN2A IN1A IN2B IN1B IN5A IN5B IN4A IN3A IN4B IN3B PS VCC AGND OUT1A OUT1B OUT2A OUT2B OUT3A OUT3B OUT4A OUT4B OUT5A OUT5B VM1 AT5558 VC3 Vref VC4 VC12 VC5 RFG 0.1uF Iris AF Zoom Shutter VM2 VM3 47uF PS : H active L stand-by PGND1 PGND2 M 0.01~0.1uF (option) 0.01~0.1uF (option) osicllation preventive capacitor 0.01~0.1uF (option) 0.01~0.1uF (option) 0.01~0.1uF (option) 7.5k 30k Constant voltage ：CH1&CH2→ i O ON C i O I R V V i CH3&CH4→ i O ON i C i O I R V V i Constant current：CH5→ RFG V I C O 5 =

Preliminary Product Information 5-Channel DSC Motor Driver Tel: 886-3-563-0878 Fax: 886-3-563-0879 WWW: http://www.aimtron.com.tw 06/10/05 REV:1.1 Email: service@aimtron.com.tw PC Board layout 1. Due to PGND1 and PGND2 are bound to the bottom of the package, it should be noted that the bottom must be laid together with GND. 2. On the PCB, a hole should be placed in the location of the package bottom for debug issue.

Preliminary Product Information 5-Channel DSC Motor Driver Tel: 886-3-563-0878 Fax: 886-3-563-0879 WWW: http://www.aimtron.com.tw 06/10/05 REV:1.1 Email: service@aimtron.com.tw Package Description QFN32 MIN. NOM. MAX. MIN. NOM. MAX. A 0.70 0.75 0.80 27.6 29.5 31.5 0.02 0.05 0.79 1.97 b 0.18 0.25 0.30 7.1 9.8 11.8 D 4.90 5.00 5.10 193 197 201 1.25 2.70 3.70 106 146 E 4.90 5.00 5.10 193 197 201 1.25 2.70 3.70 106 146 e k 0.2 7.9 L 0.3 0.4 0.5 11.8 15.7 19.7

0.50 BSC

19.7 BSC

(MM) DIMENSION (MIL)

0.2 REF

7.9 REF

Preliminary Product Information 5-Channel DSC Motor Driver Tel: 886-3-563-0878 Fax: 886-3-563-0879 WWW: http://www.aimtron.com.tw 06/10/05 REV:1.1 Email: service@aimtron.com.tw Reflow Profiles Sn-Pb Eutectic Assembly Pb-Free Assembly Profile Feature Large Body Pkg. thickness ≥2.5mm or Pkg. volume ≥350mm3 Small Body Pkg. thickness <2.5mm or Pkg. volume <350mm3 Large Body Pkg. thickness ≥2.5mm or Pkg. volume ≥350mm3 Small Body Pkg. thickness ≥2.5mm or Pkg. volume ≥350mm3 Average ramp-up rate (TL to TP) 3°C/second max. 3°C/second max. Preheat -Temperature Min(Tsmin) -Temperature Max (Tsmax) -Time (min to max)(ts) 100°C 150°C 60-120 seconds 150°C 200°C 60-180 seconds Tsmax to TL -Ramp-up Rate 3°C/second max. Time maintained above: -Temperature (TL) -Time (tL) 183°C 60-150 seconds 217°C 60-150 seconds Peak Temperature(TP) 225+0/-5°C 240+0/-5°C 245+0/-5°C 250+0/-5°C Time within 5°C of actual Peak Temperature (tP) 10-30 seconds 10-30 seconds 10-30 seconds 20-40 seconds Ramp-down Rate 6°C/second max. 3°C/second max. Time 25°C to Peak Temperature 6 minutes max. 8 minutes max. *All temperatures refer to topside of the package, measured on the package body surface.