AT5660 AIMTRON | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 12
Technical content
Features
˙2 channels of DC motor BTL driver ˙2 channels of BTL driver for coils with current feedback ˙1 channels forward/reverse control DC motor driver ˙Built-in suspension function. ˙Built-in thermal shutdown circuit. ˙Operating voltage: 4.5V~13.2V
Description
The AT5660 is a 5-channel BTL driver IC. Two of them can drive DC mo tors and two can drive coils, such as the focus and tracking actuators of a CD-ROM/DVD-ROM/DVD-Player system, with current feedback. It also built-in one channel bi-direction DC motor driver for Tray.
Applications
CD-ROM/DVD-ROM/CD-RW drives DVD player. Block Diagram Aimtron reserves the right without notice to change this circuitry and specifications.
Preliminary Product Information 5 - C h a n n e l M o t o r D r i v e r f o r D V D / V C D Tel: 886-3-563-0878 http://www.aimtron.com.tw Fax: 886-3-563-0879 Email: service@aimtron.com.tw Pin Descriptions Pin No. Pin name Function
1 IN1 CH1(Focus coil) input
2 CAP1_1 CH1 error amplifier filter capacitor connection 1
3 CAP1_2 CH1 error amplifier filter capacitor connection 2
4 IN2 CH2(Sled driver) input
5 FB1 CH1(Focus coil) feedback pin
6 FWD CH5 forward input
7 REV CH5 reverse input
8 VCC1 Power Supply 1
9 OUT5- CH5(Tray driver) output(-)
10 OUT5+ CH5(Tray driver) output(+)
11 OUT2- CH2(Sled driver) output (-)
12 OUT2+ CH2(Sled driver) output (+)
13 OUT1- CH1(Focus coil) output (-)
14 OUT1+ CH1(Focus coil) output (+)
15 OUT4+ CH4(Tracking coil) output (+)
16 OUT4- CH4(Tracking coil) output (-)
17 OUT3+ CH3(Loader) output (+)
18 OUT3- CH3(Loader) output (-)
19 VCC2 Power Supply 2
20 FB4 CH4(Tracking coil) feedback pin
21 VCTL CH5 Speed control input
22 GND Ground
23 IN3 CH3(Loader) input
24 CAP4_2 CH4 error amplifier filter capacitor connection 2
25 CAP4_1 CH4 error amplifier filter capacitor connection 1
26 IN4- CH4 (Tracking driver) input
27 VBIAS VREF input pin
28 MUTE_1_2_3_4 Mute control for CH1,Ch2,CH3,CH4
Notes: The indicated polarities for the output pins are under the condition that all inputs are (+). The power supplies for the driver output are PVcc1 for the loader, PVcc2 for focus and tracking drivers, and Vcc for pre-block and sled driver. Therefore, make sure Vcc ≧PVcc1,2. Pin Out
Preliminary Product Information 5 - C h a n n e l M o t o r D r i v e r f o r D V D / V C D Tel: 886-3-563-0878 http://www.aimtron.com.tw Fax: 886-3-563-0879 Email: service@aimtron.com.tw
Ordering Information
Part number Package Marking AT5660H 28-pin HSOP AT5660H Power Dissipation (Ta = 25oC) C o n d i t i o n : m o u n t o n 5 0 x 5 0 m m2 t=1.0mm paper phenol PCB Absolute maximum ratings (Ta = 25oC) Parameter Symbol Limits unit Power supply voltage VCC1,2 13.5 V Power dissipation P d 1.7 W Operating temperature T opr -30~+80 oC Storage temperature T stg -55~+150 oC NOTE:* 1. Power dissipation reduces 13.6mW / °C for using above Ta=25°C 2. Do not exceed Pd and SOA. Recommended operating conditions (Ta = 25oC) Parameter Symbol Limits unit VCC1 4.0~13.2 VPower supply voltage VCC2 4.0~Vcc1 V
Preliminary Product Information 5 - C h a n n e l M o t o r D r i v e r f o r D V D / V C D Tel: 886-3-563-0878 http://www.aimtron.com.tw Fax: 886-3-563-0879 Email: service@aimtron.com.tw
Electrical characteristics
(unless otherwise noted, Ta = 25oC,VCC1 =12V , VCC2 =5V , VBIAS=2.5V , RL1= RL2=8Ω, RL3= RL4=12Ω) Parameter Symbol Min. Typ. Max. Unit Conditions Quiescent current I QC -1 8 2 7 m A N o L o a d Mute quiescent current I QSB - - 5 mA CH5 active Mute ON voltage V SBON 0- 0 . 5 V Mute OFF voltage V SBOFF 2.0 - - V <Actuator driver> Output current offset I O1,2 -6 - 6 mA Maximum output voltage V O1,2 3.6 4.0 - V VIN = VBIAS ±1.5V Gain Gm 1.3 1.5 1.7 A/V VIN = VBIAS ±0.2V <Sled motor driver> Output voltage offset V OFFSL -100 0 100 mV Maximum output voltage V O3MAX 7.5 9.0 - V VIN = VBIAS ±1.5V Closed loop gain G VSL 18.0 20.0 22.0 dB VIN = VBIAS ±0.2V <Loader motor driver> Output voltage offset V OFFLD -50 0 50 mV Maximum output voltage V O4max1 7.5 9.0 - V VIN = VBIAS±2.0V Maximum output voltage V O4max2 3.6 4.0 - V VIN = VBIAS ±1.5V VCC1=5V Closed loop gain G VLD 13.5 15.5 17.5 dB VIN = VBIAS ±0.2V Gain error ΔGVLD 012 d B VIN = VBIAS±0.2V <Tray motor driver> -6 . 0- V RL5=45Ω, RVCTL=400Ω,Maximum output voltage V O5max1 3.8 - 4.2 V RL5=45Ω, RVCTL=0Ω, VCC1=VCC2=5V Output voltage offset V OFFTR -50 0 50 mV Input high level voltage V IH 2.0 - - V Input low level voltage V IL -- 0 . 8 V
Preliminary Product Information 5 - C h a n n e l M o t o r D r i v e r f o r D V D / V C D Tel: 886-3-563-0878 http://www.aimtron.com.tw Fax: 886-3-563-0879 Email: service@aimtron.com.tw Tray Motor Driver Fig1. Input Ouput FWD REV OUT5+ OUT5- Status High High Low Low Break High Low High Low Forward Low High Low High Reverse Low Low Open Open Standby Tray Motor Speed Control The amplitude of the output voltage is contro lled by VCTL(pin21). If you want to control differential output voltage of the tray, insert external resistor RVCTL as shown in figure 1.
Preliminary Product Information 5 - C h a n n e l M o t o r D r i v e r f o r D V D / V C D Tel: 886-3-563-0878 http://www.aimtron.com.tw Fax: 886-3-563-0879 Email: service@aimtron.com.tw Test Circuit
Preliminary Product Information 5 - C h a n n e l M o t o r D r i v e r f o r D V D / V C D Tel: 886-3-563-0878 http://www.aimtron.com.tw Fax: 886-3-563-0879 Email: service@aimtron.com.tw Typical Curve
Preliminary Product Information 5 - C h a n n e l M o t o r D r i v e r f o r D V D / V C D Tel: 886-3-563-0878 http://www.aimtron.com.tw Fax: 886-3-563-0879 Email: service@aimtron.com.tw
Preliminary Product Information 5 - C h a n n e l M o t o r D r i v e r f o r D V D / V C D Tel: 886-3-563-0878 http://www.aimtron.com.tw Fax: 886-3-563-0879 Email: service@aimtron.com.tw
Preliminary Product Information 5 - C h a n n e l M o t o r D r i v e r f o r D V D / V C D Tel: 886-3-563-0878 http://www.aimtron.com.tw Fax: 886-3-563-0879 Email: service@aimtron.com.tw Application circuit
Preliminary Product Information 5 - C h a n n e l M o t o r D r i v e r f o r D V D / V C D Tel: 886-3-563-0878 http://www.aimtron.com.tw Fax: 886-3-563-0879 Email: service@aimtron.com.tw
Preliminary Product Information 5 - C h a n n e l M o t o r D r i v e r f o r D V D / V C D Tel: 886-3-563-0878 http://www.aimtron.com.tw Fax: 886-3-563-0879 Email: service@aimtron.com.tw Package Outlines (units:mm): HSOP-28