AT202JN ANALOGTECHNOLOGIES | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 5
Technical content
Table 1. Electrical characteristics. (Typical @ 25°C and VS = 15V unless otherwise noted.) *Test Schematic Figure 3 @ 100Hz Sine Wave @vS(t) = 1000V .
Figure 3. CMRR & CMTC Test Schematic
1 IN+ Isolated analog input Isolated positive (Non-inverting) input
2 IN COM Isolated analog ground Isolated ground
3 IN− Isolated analog input Isolated negative (inverting) input
38 FB Isolated analog output Isolated op amp output as a feedback signal
19 HI Analog output
The dimensions of AT202JN in DIP package are shown in Figure 3. Figure 3. Dimensions of AT202JN DIP Package
Copyrights 2000-2022, Analog Technologies, Inc. All Rights Reserved. Updated on 4/15/2022 Email: staff@analogti.com/sales@ analogti.com 5 Analog Technologies AT202JN High Voltage Isolation Amplifier NOTICE 1. ATI warrants performance of its products for one year to the specifications applicable at the time of sale, except for those damaged by excessive abuse. Products found not meeting the specifications within one year from the date of sale can be exchanged free of charge. 2. ATI reserves the right to make changes to its products or to discontinue any product or service without notice and advise customers to obtain the latest version of relevant information to verify, before placing orders, that the information being relied on is current and complete. 3. All products are sold subject to the terms and conditions of sa le supplied at the time of order acknowledgment, including those pertaining to warranty, patent infringement, and limitation of liability. Testing and other quality control techniques are utilized to the extent ATI deems necessary to support this warranty. Specific testing of all parameters of each device is not necessarily performed, except those mandated by government requirements. 4. Customers are responsible for their applications using ATI products. In order to minimi ze risks associated with the customers’ applications, adequate design and operating safeguards must be provided by the customers to minimize inherent or procedural hazards. ATI assumes no liability for applications assistance or customer product design. 5. ATI does not warrant or represent that any license, either expressed or implied, is granted under any patent right, copyright, mask work right, or other intellectual property right of ATI covering or relating to any combination, machine, or process in which such products or services might be or are used. ATI’s publication of information regarding any third party’s products or services does not constitute ATI’s approval, warranty or endorsement thereof. 6. IP (Intellectual Property) Ownership: ATI retains the ownership of full rights for special technologies and/or techniques embedded in its products, the designs for mechanics, optics, plus all modifications, improvements, and inventions made by ATI for its products and/or projects.