DATASHEET SEARCH SITE | WWW.ALLDATASHEET.COM
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 6
Technical content
Features
Dual Channel Photovoltaic MOSFET Driver Open Circuit Voltage: 7V Typical Short Circuit Current: 20 A Typical Low Input Current: CMOS Compatibility Fast Switching Speed: 0.3ms (Ton), 0.03ms (Toff ) Typical High Input-to-Output Insulation Voltage (Safety and Regulatory Pending Approvals) - 3750 Vrms for 1 min per UL1577 - CSA Component Acceptance
Applications
Solid State Relay Module Voltage Supply for electronic circuits Lead (Pb) Free RoHS 6 fully compliant RoHS 6 fully compliant options available; -xxxE denotes a lead-free product
Ordering Information
ASSR-xxxx is UL Recognized with 3750 Vrms for 1 minute per UL1577 and is approved under CSA Component Accep- tance Notice #5. Part number Option Package Surface Mount Gull Wing Tape & Reel QuantityRoHS Compliant ASSR-V621 -002E 300 mil DIP-8 50 units per tube -302E X X 50 units per tube -502E X X X 1000 units per reel ASSR-V622 -002E 300 mil DIP-8 50 units per tube -302E X X 50 units per tube -502E X X X 1000 units per reel To order, choose a part number from the part number column and combine with the desired option from the option column to form an order entry. Example: ASSR-V621-002E to order product of 300mil DIP-8 package in tube packaging and RoHS Compliant. Option datasheets are available. Contact your Avago sales representative or authorized distributor for information.
8-Pin DIP Package with Gull Wing Surface Mount Option 300 1.080 ± 0.320 (0.043 ± 0.013) 2.54 ± 0.25 (0.100 ± 0.010) 0.51 (0.020) MIN. 0.65 (0.025) MAX. 4.70 (0.185) MAX. 2.92 (0.115) MIN. 5° TYP. 0.254 + 0.076 - 0.051 (0.010+ 0.003) - 0.002) 7.62 ± 0.25 (0.300 ± 0.010) 6.35 ± 0.25 (0.250 ± 0.010) 9.65 ± 0.25 (0.380 ± 0.010) A XXXX YYWW DATE CODE DIMENSIONS IN MILLIMETERS AND (INCHES). 5678 4321 OPTION CODE* UL RECOGNITION UR TYPE NUMBER OPTION NUMBERS 300 AND 500 NOT MARKED. 3.56 ± 0.13 (0.140 ± 0.005) LEAD FREE 0.635 ± 0.25 (0.025 ± 0.010) 12° NOM. 9.65 ± 0.25 (0.380 ± 0.010) 0.635 ± 0.130 (0.025 ± 0.005) 7.62 ± 0.25 (0.300 ± 0.010) 5678 4321 9.65 ± 0.25 (0.380 ± 0.010) 6.350 ± 0.25 (0.250 ± 0.010) 1.016 (0.040) 1.27 (0.050) 10.9 (0.430) 2.0 (0.080) LAND PATTERN RECOMMENDATION 1.080 ± 0.320 (0.043 ± 0.013) 3.56 ± 0.13 (0.140 ± 0.005) 1.780 (0.070) MAX.1.19 (0.047) MAX. 2.54 (0.100) BSC DIMENSIONS IN MILLIMETERS (INCHES). LEAD COPLANARITY = 0.10 mm (0.004 INCHES). NOTE: FLOATING LEAD PROTRUSION IS 0.25 mm (10 mils) MAX. 0.254 + 0.076 - 0.051 (0.010 + 0.003) - 0.002)
The ASSR-V621-002E and ASSR-V622-002E are approved by the following organizations: UL Approved under UL 1577, component recognition program up to VISO = 3750 VRMS CSA Approved under CSA Component Acceptance Notice #5. 217°C RAMP-DOWN 6°C/SEC. MAX. RAMP-UP 3°C/SEC. MAX. 150 - 200°C 260 +0/-5°C t 25°C to PEAK 60 to 150 SEC. 20-40 SEC. TIME WITHIN 5°C of ACTUAL PEAK TEMPERATUREtp ts PREHEAT 60 to 180 SEC. tL TL Tsmax Tsmin Tp TIME (SECONDS) TEMPERATURE (°C) NOTES: THE TIME FROM 25°C to PEAK TEMPERATURE = 8 MINUTES MAX. Tsmax = 200°C, Tsmin = 150°C Use of non-chlorine-activated fluxes is highly recommended. Note: Non-Halide fl ux should be used. Insulation and Safety Related Specifi cations Parameter Symbol ASSR-V621-002E ASSR-V622-002E Units Conditions Minimum External Air Gap (Clearance) L(101) 7.1 mm Measured from input terminals to output terminals, shortest distance through air. Minimum External Tracking (Creepage) L(102) 7.4 mm Measured from input terminals to output terminals, shortest distance path along body. Minimum Internal Plastic Gap (Internal Clearance) 0.08 mm Through insulation distance conductor to conductor, usually the straight line distance thickness between the emitter and detector. Tracking Resistance (Comparative Tracking Index) CTI 175 V DIN IEC 112/VDE 0303 Part 1 Isolation Group (DIN VDE0109) IIIa Material Group (DIN VDE 0109)
Parameter Symbol Min. Max. Units Note Storage Temperature T S -55 125 °C Operating Temperature T A -40 85 °C Lead Soldering Cycle Temperature 260 °C Time 10 s Input Current Average I F 30 mA Surge 300 Transient 1000 Reversed Input Voltage V R 5V Input Power Dissipation P IN 100 mW Solder Refl ow Temperature Profi le See Lead Free IR Profi le Recommended Operating Conditions Parameter Symbol Min. Max. Units Note Input Current (ON) I F(ON) 33 0 m A Input Voltage (OFF) V F(OFF) 0 0.8 V Operating Temperature T A -40 +85 °C Package Characteristics Unless otherwise specifi ed, operating temperature TA = 25°C. Parameter Symbol Min. Typ. Max. Units Conditions Fig. Note Input-Output Momentary Withstand Voltage VISO 3750 Vrms RH ≤ 50%, t = 1 min 1 Input-Output Resistance R I-O 1012 ΩV I-O = 500 Vdc Input-Output Capacitance C I-O 0.6 pF f = 1 MHz; V I-O = 0 Vdc Electrical Specifi cations (DC) For operating TA = +25°C Parameter Symbol Min. Typ. Max. Units Conditions Fig. Note Open Circuit Voltage V OC 6.5 7 V I F =10mA, IO=0mA Short Circuit Current I SC 15 20 A IF =10mA, VO=0V Input Reverse Breakdown Voltage VR 5V IR =10A Input Forward Voltage V F 1.1 1.3 1.7 V I F =10mA Switching Specifi cations (AC) For operating TA = +25°C Parameter Symbol Min. Typ. Max. Units Conditions Fig. Note Turn On Time T ON 0.28 ms I F =10mA, CL=1nF Turn Off Time T OFF 0.03 ms I F =10mA, CL=1nF Note: 1. Device is considered as a two terminal device; pin 1, 2, 3, 4 shorted and pin 5, 6, 7, 8 shorted.