DATASHEET SEARCH SITE | WWW.ALLDATASHEET.COM
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 12
Technical content
Features
Compact Solid-State Bi-directional Signal Switch Dual Channel Normally-off Single-Pole-Single-Throw (SPST) Relay 250V Output Withstand Voltage 0.2A Current Rating Low Input Current: CMOS Compatibility Low C x R: 340pF typical Low Output Off -state Leakage Current: 30pA typical Fast Speed Switching: 0.2ms (Ton), 0.02ms (Toff ) typical High Transient Immunity: >1kV/ s High Input-to-Output Insulation Voltage (Safety and Regulatory Approvals Pending) - 3750 Vrms for 1 min per UL1577 - CSA Component AcceptanceCAUTION: It is advised that normal static precautions be taken in handling and assembly of this component to prevent damage and/or degradation which may be induced by ESD. Lead (Pb) Free RoHS 6 fully compliant RoHS 6 fully compliant options available; -xxxE denotes a lead-free product
Ordering Information
ASSR-xxxx is UL Recognized with 3750 Vrms for 1 minute per UL1577 and is approved under CSA Component Accept- ance Notice #5. Part number Option Package Surface Mount Gull Wing Tape & Reel QuantityRoHS Compliant ASSR-322R -002E 300 mil DIP-8 50 units per tube -302E X X 50 units per tube -502E X X X 1000 units per reel To order, choose a part number from the part number column and combine with the desired option from the option column to form an order entry. Example 1: ASSR-322R-002E to order product of 300mil DIP-8 package in tube packaging and RoHS Compliant. Option datasheets are available. Contact your Avago sales representative or authorized distributor for information.
1.080 ± 0.320 (0.043 ± 0.013) 2.54 ± 0.25 (0.100 ± 0.010) 0.51 (0.020) MIN. 0.65 (0.025) MAX. 4.70 (0.185) MAX. 2.92 (0.115) MIN. 5° TYP. 0.254 + 0.076 - 0.051 (0.010+ 0.003) - 0.002) 7.62 ± 0.25 (0.300 ± 0.010) 6.35 ± 0.25 (0.250 ± 0.010) 9.65 ± 0.25 (0.380 ± 0.010) A XXXX YYWW DATE CODE DIMENSIONS IN MILLIMETERS AND (INCHES). 5678 4321 OPTION CODE* UL RECOGNITION UR TYPE NUMBER OPTION NUMBERS 300 AND 500 NOT MARKED. 3.56 ± 0.13 (0.140 ± 0.005) LEAD FREE ASSR-322R 8-Pin DIP Package
217°C RAMP-DOWN 6°C/SEC. MAX. RAMP-UP 3°C/SEC. MAX. 150 - 200°C 260 +0/-5°C t 25°C to PEAK 60 to 150 SEC. 20-40 SEC. TIME WITHIN 5°C of ACTUAL PEAK TEMPERATUREtp ts PREHEAT 60 to 180 SEC. tL TL Tsmax Tsmin Tp TIME (SECONDS) TEMPERATURE (°C) NOTES: THE TIME FROM 25°C to PEAK TEMPERATURE = 8 MINUTES MAX. Tsmax = 200°C, Tsmin = 150°C Use of non-chlorine-activated fluxes is highly recommended. ASSR-322R 8-Pin DIP Package with Gull Wing Surface Mount Option 300 0.635 ± 0.25 (0.025 ± 0.010) 12° NOM. 9.65 ± 0.25 (0.380 ± 0.010) 0.635 ± 0.130 (0.025 ± 0.005) 7.62 ± 0.25 (0.300 ± 0.010) 5678 4321 9.65 ± 0.25 (0.380 ± 0.010) 6.350 ± 0.25 (0.250 ± 0.010) 1.016 (0.040) 1.27 (0.050) 10.9 (0.430) 2.0 (0.080) LAND PATTERN RECOMMENDATION 1.080 ± 0.320 (0.043 ± 0.013) 3.56 ± 0.13 (0.140 ± 0.005) 1.780 (0.070) MAX.1.19 (0.047) MAX. 2.54 (0.100) BSC DIMENSIONS IN MILLIMETERS (INCHES). LEAD COPLANARITY = 0.10 mm (0.004 INCHES). NOTE: FLOATING LEAD PROTRUSION IS 0.25 mm (10 mils) MAX. 0.254 + 0.076 - 0.051 (0.010 + 0.003) - 0.002)
The ASSR-322R is approved by the following organizations: UL Approved under UL 1577, component recognition program up to VISO = 3750 VRMS CSA Approved under CSA Component Acceptance Notice #5. Insulation and Safety Related Specifi cations Parameter Symbol ASSR-322R Units Conditions Minimum External Air Gap (Clearance) L(101) 7.1 mm Measured from input terminals to output terminals, shortest distance through air. Minimum External Tracking (Creepage) L(102) 7.4 mm Measured from input terminals to output terminals, shortest distance path along body. Minimum Internal Plastic Gap (Internal Clearance) 0.08 mm Through insulation distance conductor to conductor, usually the straight line distance thickness between the emitter and detector. Tracking Resistance (Compara- tive Tracking Index) CTI 175 V DIN IEC 112/VDE 0303 Part 1 Isolation Group (DIN VDE0109) IIIa Material Group (DIN VDE0109) Absolute Maximum Ratings Parameter Symbol Min. Max. Units Note Storage Temperature T S -55 125 C Operating Temperature T A -40 85 C Junction Temperature T J 150 C Lead Soldering Cycle Temperature Time 260 s Input Current Average Surge Transient I F 25 1000 mA Reversed Input Voltage V R 5V Input Power Dissipation P IN 80 mW Output Power Dissipation P O 680 mW Average Output Current (TA = 25°C, TC 100°C) IO 0.2 A 1 Output Voltage (TA = 25°C) V O -250 250 V Solder Refl ow Temperature Profi le See Lead Free IR Profi le
Recommended Operating Conditions Parameter Symbol Min. Max. Units Note Input Current (ON) I F(ON) 32 0 m A 2 Input Voltage (OFF) V F(OFF) 0 0.8 V Operating Temperature T A -40 +85 C Package Characteristics Unless otherwise specifi ed, TA = 25°C. Input-Output Momentary Withstand Voltage VISO 3750 Vrms RH 50%, t = 1 min 3, 4 Input-Output Resistance R I-O 1012 VI-O = 500 Vdc Input-Output Capacitance C I-O 0.8 pF f = 1 MHz; VI-O = 0 Vdc Electrical Specifi cations (DC) Over recommended operating TA = -40°C to 85°C, IF = 5mA to 10mA, unless otherwise specifi ed. Output Withstand Voltage |VO(OFF)| 250 280 V VF =0.8V, IO=250 A, TA=25C 230 V VF =0.8V, IO=250 A 3 Output Leakage Current IO(OFF) 0.03 1 nA V F =0.8V, VO=250V, TA=25C 1 A VF =0.8V, VO=250V 4 5 Output Off -Capacitance C (OFF) 45 60 pF V F =0.8V, VO=0V, Freq=1 MHz Output Off set Voltage |V(OS)|1 V IF =5mA, IO=0mA Input Reverse Breakdown Voltage VR 5V IR =10 A Input Forward Voltage VF 1.1 1.3 1.65 V I F =5mA 6, 7 Output On-resistance R(ON) 7.5 8.5 IF =5mA, IO=200mA, Pulse 30ms, TA=25C 8, 9 6
Figure 13. Typical Turn Off Time vs. Temperature
Figure. 15. Output Transient Rejection Test Circuit PULSE GEN. Zo = 50 ASSR-322R OUTPUT Vo MONITORING NODE CM RM CM INCLUDES PROBE AND FIXTURE CAPACITANCE RM INCLUDES PROBE AND FIXTURE RESISTANCE V PEAK tR VPEAK 90% 10% tF 90% 10% INPUT OPEN VO (MAX) < 3V F PEAK R PE AK t VOR t V dt dV ) 8.0()8.0(0 = OVER SHOOT ON V PEAK IS TO BE 10%
Figure 16. Input-Output Transient Rejection Test Circuit
For product information and a complete list of distributors, please go to our web site: www.avagotech.com Avago, Avago Technologies, and the A logo are trademarks of Avago Technologies in the United States and other countries. Data subject to change. Copyright © 2005-2012 Avago Technologies. All rights reserved. AV01-0125EN - March 19, 2012 Applications Information On-Resistance and Derating Curves The Output On-Resistance, R (ON), specifi ed in this data sheet, is the resistance measured across the output contact when a pulsed current signal (Io=200mA) is ap- plied to the output pins. The use of a pulsed signal ( 30ms) implies that each junction temperature is equal to the ambient and case temperatures. The steady-state resistance, Rss, on the other hand, is the value of the re- sistance measured across the output contact when a DC current signal is applied to the output pins for a duration suffi cient to reach thermal equilibrium. Rss includes the eff ects of the temperature rise in the device. Derating curves are shown in Figures 1 and 2. Figure 1 specifi es the maximum average output current allow- able for a given ambient temperature. Figure 2 specifi cs the output power dissipation allowable for a given case temperature. Above a case temperature 102 C, the maxi- mum allowable output current and power dissipation are related by the expression Rss=Po(max)/(Io(max)) from which Rss can be calculated. Staying within the safe area assures that the steady state MOSFET junction temperature remains less than 150C. Turn On Time and Turn Off Time Variation The ASSR-322R exhibits a very fast turn on and turn off time. Both the turn on and turn off time can be adjusted by choosing proper forward current as depicted in Fig- ures 10 and 12. The changes of the turn on and turn off time with ambient temperature are also shown in Figures 11 and 13.