DATASHEET SEARCH SITE | WWW.ALLDATASHEET.COM
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 14
Technical content
Features
Compact Solid-State Bi-directional Signal Switch Single and Dual Channel Normally-off Single-Pole- Single-Throw (SPST) Relay 250V Output Withstand Voltage 0.2A or 0.4A Current Rating (See Schematic for ASSR-3211 Connections A & B) Low Input Current: CMOS Compatibility Low On-Resistance: 2 Typical for DC-only, 8 Typical for AC/DC Very High Output Off -state Impedance:
10 Teraohms Typical
High Speed Switching: 0.25ms (Ton), 0.02ms (Toff ) Typical High Transient Immunity: >1kV/ s High Input-to-Output Insulation Voltage (Safety and Regulatory Approvals) - 3750 Vrms for 1 min per UL1577 - CSA Component Acceptance Functional Diagram CAUTION: It is advised that normal static precautions be taken in handling and assembly of this component to prevent damage and/or degradation which may be induced by ESD. Lead (Pb) Free RoHS 6 fully compliant RoHS 6 fully compliant options available; -xxxE denotes a lead-free product Truth Table Opto-isolation Turn -off Circuit Single Channel, SPST Relay,
1 Form A in 4-Pin SO Package
Ordering Information
ASSR-xxxx is UL Recognized with 3750 Vrms for 1 minute per UL1577 and is approved under CSA Component Accept- ance Notice #5. Part number Option Package Surface Mount Gull Wing Tape & Reel QuantityRoHS Compliant ASSR-3210 -003E SO-4 X 100 units per tube -503E X X 1500 units per reel ASSR-3211 -001E 300mil DIP-6 50 units per tube -301E X X 50 units per tube -501E X X X 1000 units per reel ASSR-3220 -002E 300 mil DIP-8 50 units per tube -302E X X 50 units per tube -502E X X X 1000 units per reel To order, choose a part number from the part number column and combine with the desired option from the option column to form an order entry. Example 1: ASSR-3211-501E to order product of 300mil DIP-6 Gull Wing Surface Mount package in Tape and Reel packaging and RoHS Compliant. Example 2: ASSR-3220-002E to order product of 300mil DIP-8 package in tube packaging and RoHS Compliant. Option datasheets are available. Contact your Avago sales representative or authorized distributor for information.
ASSR-3211 6-Pin DIP Package 4.19 (0.165) 2.29 (0.090) 2.54 (0.100) TYP. 0.635 ± 0.130 (0.025 ± 0.005) 9.65 ± 0.25 (0.380 ± 0.010) 7.62 ± 0.25 (0.300 ± 0.010) 0.635 ± 0.25 (0.025 ± 0.010) 12¡ NOM. 0.20 (0.008) 0.30 (0.013) 1.78 (0.070) MAX. 9.65 ± 0.25 (0.380 ± 0.010) 6.35 ± 0.25 (0.250 ± 0.010) 1.27 (0.050) 10.9 (0.430) MAX. 2.0 (0.080) NOTE: FLOATING LEAD PROTRUSION IS 0.25 mm (10 mils) MAX. LAND PATTERN RECOMMENDATION ASSR-3210 4-Pin Small Outline Package DIMENSIONS IN MILLIMETERS AND [INCHES] OPTION NUMBER 500 AND UL RECOGNITION NOT MARKED 0.46 0.018 0.5 0.02 0.5 0.02 2.0±0.2 0.079±0.009 0.102±0.102 0.004±0.004 0.20 0.008 4.3 ±0.2 0.169±0.008 2.54 0.100 4.40±0.20 0.173±0.008 0.41 0.016 6.8±0.4 0.268±0.016 TYPE NUMBER DATE CODE LEAD FREE 0.80 0.031 2.540 0.10 4.80 0.189 1.20 0.047 0.375 0.015 YWW xxxx LAND PATTERN RECOMMENDATION
ASSR-3220 8-Pin DIP Package 1.080 ± 0.320 (0.043 ± 0.013) 2.54 ± 0.25 (0.100 ± 0.010) 0.51 (0.020) MIN. 0.65 (0.025) MAX. 4.70 (0.185) MAX. 2.92 (0.115) MIN. 5° TYP. 0.254 + 0.076 - 0.051 (0.010+ 0.003) - 0.002) 7.62 ± 0.25 (0.300 ± 0.010) 6.35 ± 0.25 (0.250 ± 0.010) 9.65 ± 0.25 (0.380 ± 0.010) A XXXX YYWW DATE CODE DIMENSIONS IN MILLIMETERS AND (INCHES). 5678 4321 OPTION CODE* UL RECOGNITION UR TYPE NUMBER OPTION NUMBERS 300 AND 500 NOT MARKED. 3.56 ± 0.13 (0.140 ± 0.005) LEAD FREE 9.40 (0.370) 9.90 (0.390) PIN ONE DOT A XXXX YYWW TYPE NUMBER DATE CODE 2.16 (0.085) 2.80 (0.110) (0.020) (0.040) 0.45 (0.018) 0.65 (0.025) 4.70 (0.185) MAX. 2.66 (0.105) MIN. 6.10 (0.240) 6.60 (0.260) 0.20 (0.008) 0.33 (0.013) 5¡ TYP. 7.36 (0.290) 7.88 (0.310) DIMENSIONS IN MILLIMETERS AND (INCHES). 321 1.78 (0.070) MAX. RU UL RECOGNITION LEAD FREE ASSR-3211 6-Pin DIP Package with Gull Wing Surface Mount Option 300
217°C RAMP-DOWN 6°C/SEC. MAX. RAMP-UP 3°C/SEC. MAX. 150 - 200°C 260 +0/-5°C t 25°C to PEAK 60 to 150 SEC. 20-40 SEC. TIME WITHIN 5°C of ACTUAL PEAK TEMPERATUREtp ts PREHEAT 60 to 180 SEC. tL TL Tsmax Tsmin Tp TIME (SECONDS) TEMPERATURE (°C) NOTES: THE TIME FROM 25°C to PEAK TEMPERATURE = 8 MINUTES MAX. Tsmax = 200°C, Tsmin = 150°C ASSR-3220 8-Pin DIP Package with Gull Wing Surface Mount Option 300 0.635 ± 0.25 (0.025 ± 0.010) 12° NOM. 9.65 ± 0.25 (0.380 ± 0.010) 0.635 ± 0.130 (0.025 ± 0.005) 7.62 ± 0.25 (0.300 ± 0.010) 5678 4321 9.65 ± 0.25 (0.380 ± 0.010) 6.350 ± 0.25 (0.250 ± 0.010) 1.016 (0.040) 1.27 (0.050) 10.9 (0.430) 2.0 (0.080) LAND PATTERN RECOMMENDATION 1.080 ± 0.320 (0.043 ± 0.013) 3.56 ± 0.13 (0.140 ± 0.005) 1.780 (0.070) MAX.1.19 (0.047) MAX. 2.54 (0.100) BSC DIMENSIONS IN MILLIMETERS (INCHES). LEAD COPLANARITY = 0.10 mm (0.004 INCHES). NOTE: FLOATING LEAD PROTRUSION IS 0.25 mm (10 mils) MAX. 0.254 + 0.076 - 0.051 (0.010 + 0.003) - 0.002) Non-halide fl ux should be used.
The ASSR-3210, ASSR-3211 and ASSR-3220 are approved by the following organizations: UL Approved under UL 1577, component recognition program up to VISO = 3750 VRMS CSA Approved under CSA Component Acceptance Notice #5. Parameter Symbol ASSR-3210 ASSR-3211, ASSR-3220 Units Conditions Minimum External Air Gap (Clearance) L(101) 4.9 7.1 mm Measured from input terminals to output ter- minals, shortest distance through air. Minimum External Tracking (Creepage) L(102) 4.9 7.4 mm Measured from input terminals to output ter- minals, shortest distance path along body. Minimum Internal Plastic Gap (Internal Clearance) 0.08 0.08 mm Through insulation distance conductor to conductor, usually the straight line distance thickness between the emitter and detector. Tracking Resistance (Comparative Tracking Index) CTI 175 175 V DIN IEC 112/VDE 0303 Part 1 Isolation Group (DIN VDE0109) IIIa IIIa Material Group (DIN VDE 0109) Insulation and Safety Related Specifi cations
Parameter Symbol Min. Max. Units Note Storage Temperature T S -55 125 C Operating Temperature T A -40 85 C Junction Temperature T J 125 C Lead Soldering Cycle Temperature 260 C Time 10 s Input Current Average I F 25 mA Surge 50 Transient 1000 Reversed Input Voltage V R 5V Input Power Dissipation ASSR-3220 P IN 80 mW ASSR-3211, ASSR-3210 P IN 40 mW Output Power Dissipation ASSR-3220 P O 800 mW ASSR-3211, ASSR-3210 P O 400 mW Average Output Current (TA = 25°C, TC 100°C) IO 0.2 A 1 ASSR-3211 Connection B I O 0.4 A Output Voltage (TA = 25°C) V O -250 250 V 2 ASSR-3211 Connection B V O 0 250 V 2 Solder Refl ow Temperature Profi le See Lead Free IR Profi le Recommended Operating Conditions Parameter Symbol Min. Max. Units Note Input Current (ON) I F(ON) 32 0 m A 3 Input Voltage (OFF) V F(OFF) 0 0.8 V Operating Temperature T A -40 +85 C
Unless otherwise specifi ed, TA = 25°C. Input-Output Momentary Withstand Voltage VISO 3750 Vrms RH 50%, t = 1 min 4, 5 Input-Output Resistance R I-O 1012 VI-O = 500 Vdc Input-Output Capacitance ASSR-3210 C I-O 0.4 pF f = 1 MHz; VI-O = 0 Vdc ASSR-3211 C I-O 0.5 pF ASSR-3220 C I-O 0.8 pF Electrical Specifi cations (DC) Over recommended operating TA = -40°C to 85°C, IF = 5mA to 10mA, unless otherwise specifi ed. Output Withstand Voltage |VO(OFF)| 250 280 V VF =0.8V, IO=250 A, TA=25C 230 V VF =0.8V, IO=250 A 3 Output Leakage Current IO(OFF) 0.3 100 nA V F =0.8V, VO=250V, TA=25C 1 A VF =0.8V, VO=250V 4 Output Off set Voltage |V(OS)|1 V IF =5mA, IO=0mA Input Reverse Breakdown Voltage VR 5V IR =10 A Input Forward Voltage VF 1.1 1.3 1.65 V I F =5mA 5, 6 Output On-resistance R(ON) 81 0 IF =5mA, IO=200mA, Pulse 30ms, TA=25C 7, 8 6 ASSR-3211 Connection B R (ON) 2.0 2.5 IF =5mA, IO=400mA, Pulse 30ms, TA=25C
Switching Specifi cations (AC) Over recommended operating TA = -40°C to 85°C, IF = 5mA to 10mA, unless otherwise specifi ed. Turn On Time T ON 0.25 1.0 ms I F =5mA, IO=200mA, TA=25C 9, 13 2.0 ms I F =5mA, IO=200mA 10 Turn Off Time T OFF 0.02 0.2 ms I F =5mA, IO=200mA, TA=25C 11, 13 0.5 ms I F =5mA, IO=200mA 12 Output Transient Rejection dVO/dt 1 7 kV/s VO=250V, TA=25C Input-Output Transient Rejection dVI-O/dt 1 10 kV/ s VI-O=1000V, TA=25C Notes: 1. For derating, refer to Figure 1 and 2. 2. The voltage across the output terminals of the relay should not exceed this rated withstand voltage. Over-voltage protection circuits should be added in some applications to protect against over-voltage transients. ” 3. Threshold to switch device is I F 0.5mA, however, for qualifi ed device performance over temperature range, it is recommended to operate at IF =5mA. Refer to application information in next section of this datasheet. 4. Device is considered as a two terminal device: ASSR-3210 - pin 1, 2 shorted and pin 3, 4 shorted. ASSR-3211 - pin 1, 2, 3 shorted and pin 4, 5, 6 shorted. ASSR-3220 - pin 1, 2, 3, 4 shorted and pin 5, 6, 7, 8 shorted. 5. The Input-Output Momentary Withstand Voltage is a dielectric voltage rating that should not be interpreted as an input-outpu t continuous voltage rating. For the continuous voltage rating refer to the IEC/EN/DIN EN 60747-5-2 Insulation Characteristics Table (if app licable), your equipment level safety specifi cation, or Avago Technologies Application Note 1074, “Optocoupler Input-Output Endurance Voltage. ” 6. During the pulsed R (ON) measurement ( IO duration 30ms), ambient (TA) and case temperature (TC) are equal. Applications Information On-Resistance and Derating Curves The Output On-Resistance, R (ON), specifi ed in this data sheet, is the resistance measured across the output contact when a pulsed current signal (Io=0.2A) is ap- plied to the output pins. The use of a pulsed signal (≤ 30ms) implies that each junction temperature is equal to the ambient and case temperatures. The steady-state resistance, Rss, on the other hand, is the value of the re- sistance measured across the output contact when a DC current signal is applied to the output pins for a duration suffi cient to reach thermal equilibrium. Rss includes the eff ects of the temperature rise in the device. Derating curves are shown in Figures 1 and 2, specify ing the maximum output current allowable for a given am- bient temperature. The maximum allowable output cur- rent and power dissipation are related by the ex pression Rss=Po(max)/(Io(max)) 2 from which Rss can be calculated. Staying within the safe area assures that the steady state MOSFET junction temperature remains less than 125°C. Turn On Time and Turn Off Time Variation The ASSR-32XX Series exhibits a very fast turn on and turn off time. Both the turn on and turn off time can be adjusted by choosing proper forward current as depicted in Figures 9 and 11. The changes of the turn on and turn off time with ambient temperature are also shown in Figures 10 and 12.
Figure. 14. Output Transient Rejection Test Circuit PULSE GEN. Zo = 50 ASSR-3220 OUTPUT Vo MONITORING NODE CM RM CM INCLUDES PROBE AND FIXTURE CAPACITANCE RM INCLUDES PROBE AND FIXTURE RESISTANCE V PEAK tR VPEAK 90% 10% tF 90% 10% INPUT OPEN VO (MAX) < 3V F PEAK R PE AK t VOR t V dt dV ) 8.0()8.0(0 = OVER SHOOT ON V PEAK IS TO BE 10%
Figure 15. Input-Output Transient Rejection Test Circuit Avago, Avago Technologies, and the A logo are trademarks of Avago Technologies in the United States and other countries.