DATASHEET SEARCH SITE | WWW.ALLDATASHEET.COM
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 15
Technical content
Features
Compact Solid-State Bi-directional Signal Switch Single and Dual Channel Normally-off Single-Pole- Single-Throw (SPST) Relay 60V Output Withstand Voltage 1.0A or 2.0A Current Rating (See Schematic for ASSR-1511 Connections A & B) Low Input Current: CMOS Compatibility Low On-Resistance: 0.12 Typical for DC-only, 0.35 Typical for AC/DC Very High Output Off -state Impedance:
10 Teraohms Typical
High Speed Switching: 0.25ms (Ton), 0.02ms (Toff ) Typical High Transient Immunity: >1kV/ s High Input-to-Output Insulation Voltage (Safety and Regulatory Approvals) - 3750 Vrms for 1 min per UL1577 - CSA Component Acceptance
Applications
Industrial Controls Factory Automation Data Acquisition System Measuring Instrument Medical System Security System EMR / Reed Relay Replacement Lead (Pb) Free RoHS 6 fully compliant RoHS 6 fully compliant options available; -xxxE denotes a lead-free product CAUTION: It is advised that normal static precautions be taken in handling and assembly of this component to prevent damage and/or degradation which may be induced by ESD. Truth Table Opto-isolation Turn-off Circuit Single Channel, SPST Relay,
1 Form A in 4-Pin SO Package
Ordering Information
ASSR-xxxx is UL Recognized with 3750 Vrms for 1 minute per UL1577 and is approved under CSA Component Ac- ceptance Notice #5. Part number Option Package Surface Mount Gull Wing Tape & Reel QuantityRoHS Compliant ASSR-1510 -003E SO-4 X 100 units per tube -503E X X 1500 units per reel ASSR-1511 -001E 300mil DIP-6 50 units per tube -301E X X 50 units per tube -501E X X X 1000 units per reel ASSR-1520 -002E 300 mil DIP-8 50 units per tube -302E X X 50 units per tube -502E X X X 1000 units per reel ASSR-1530 -005E SO-8 X 50 units per tube -505E X X 1000 units per reel To order see attached table, choose a part number from the part number column and combine with the desired option from the option column to form an order entry. Example 1: ASSR-1511-501E to order product of 300mil DIP-6 Gull Wing Surface Mount package in Tape and Reel packaging and RoHS Compliant. Example 2: ASSR-1520-002E to order product of 300mil DIP-8 package in tube packaging and RoHS Compliant. Option datasheets are available. Contact your Avago sales representative or authorized distributor for information. Opto-isolation Equivalent Relay Diagram Opto-isolation Circuit Turn-o-
Schematics (Cont.) ASSR-1511 Connection A Opto-isolation 3 4 Opto-isolation Equivalent Relay DiagramVo Circuit Turn-o- 4 and 6 Vo Circuit Turn-o- Opto-isolation Opto-isolation Equivalent Relay Diagram Opto-isolation Equivalent Opto-isolation Circuit Relay Diagram Turn-o- Circuit Turn-o-
ASSR-1510 4-Pin Small Outline Package 9.40 (0.370) 9.90 (0.390) PIN ONE DOT A XXXX YYWW TYPE NUMBER DATE CODE 2.16 (0.085) 2.80 (0.110) (0.020) (0.040) 0.45 (0.018) 0.65 (0.025) 4.70 (0.185) MAX. 2.66 (0.105) MIN. 6.10 (0.240) 6.60 (0.260) 0.20 (0.008) 0.33 (0.013) 5 ° TYP. 7.36 (0.290) 7.88 (0.310) DIMENSIONS IN MILLIMETERS AND (INCHES). 321 1.78 (0.070) MAX. RU UL RECOGNITION LEAD FREE ASSR-1511 6-Pin DIP Package DIMENSIONS IN MILLIMETERS AND (INCHES) OPTION NUMBER 500 AND UL RECOGNITION NOT MARKED TYPE NUMBER DATE CODE LEAD FREE xxxx LAND PATTERN RECOMMENDATION YWW 2.54 (0.100) 6.8 ± 0.016 (0.268 ± 0.016) 4.40 ± 0.20 (0.173 ± 0.008 ) 4.3 ± 0.2 (0.169 ± 0.008 ) 0.375 (0.015) 0.41 (0.016) 0.20 (0.008) 0.5 (0.02) 2.0 ± 0.2 (0.079 ± 0.009 ) 0.102 ± 0.102 (0.004 ± 0.004 ) 0.5 (0.02) 0.46 (0.018) 4.80 (0.189) 2.540 (0.10) 0.80 (0.031) 1.20 (0.047)
ASSR-1511 6-Pin DIP Package with Gull Wing Surface Mount Option 300 ASSR-1520 8-Pin DIP Package 4.19 (0.165) 2.29 (0.090) 2.54 (0.100) TYP. 0.635 ± 0.130 (0.025 ± 0.005) 9.65 ± 0.25 (0.380 ± 0.010) 7.62 ± 0.25 (0.300 ± 0.010) 0.635 ± 0.25 (0.025 ± 0.010) 12 ° NOM. 0.20 (0.008) 0.30 (0.013) 1.78 (0.070) MAX. 9.65 ± 0.25 (0.380 ± 0.010) 6.35 ± 0.25 (0.250 ± 0.010) 1.27 (0.050) 10.9 (0.430) MAX. 2.0 (0.080) NOTE: FLOATING LEAD PROTRUSION IS 0.25 mm (10 mils) MAX. LAND PATTERN RECOMMENDATION 1.080 ± 0.320 (0.043 ± 0.013) 2.54 ± 0.25 (0.100 ± 0.010) 0.51 (0.020) MIN. 0.65 (0.025) MAX. 4.70 (0.185) MAX. 2.92 (0.115) MIN. 5° TYP. 0.254 + 0.076 - 0.051 (0.010 + 0.003) - 0.002) 7.62 ± 0.25 (0.300 ± 0.010) 6.35 ± 0.25 (0.250 ± 0.010) 9.65 ± 0.25 (0.380 ± 0.010) A XXXX YYWW DATE CODE DIMENSIONS IN MILLIMETERS AND (INCHES). 5678 4321 OPTION CODE* UL RECOGNITION UR TYPE NUMBER OPTION NUMBERS 300 AND 500 NOT MARKED. 3.56 ± 0.13 (0.140 ± 0.005) LEAD FREE
ASSR-1520 8-Pin DIP Package with Gull Wing Surface Mount Option 300 ASSR-1530 8-Pin Surface Mount Package 4.40 ± 0.20 0.173 ± 0.008 0.41 0.016 6.81 ± 0.40 0.268 ± 0.016 0.375 [0.015] 2.54
0.100 TYPE NUMBER
A 9.4 ± 0.2 0.369 ± 0.008 0.51 0.020 0.20 0.008 0.46 0.018 2 ± 0.2 0.079 ± 0.008 0.102 ± 0.102 0.004 ± 0.004 DIMENSIONS IN MILLIMETERS AND [INCHES] 0.80 0.0311.20 0.047 2.54 0.100 4.80 0.189 LAND PATTERN RECOMMENDATION 0.635 ± 0.25 (0.025 ± 0.010) 12° NOM. 9.65 ± 0.25 (0.380 ± 0.010) 0.635 ± 0.130 (0.025 ± 0.005) 7.62 ± 0.25 (0.300 ± 0.010) 5678 4321 9.65 ± 0.25 (0.380 ± 0.010) 6.350 ± 0.25 (0.250 ± 0.010) 1.016 (0.040) 1.27 (0.050) 10.9 (0.430) 2.0 (0.080) LAND PATTERN RECOMMENDATION 1.080 ± 0.320 (0.043 ± 0.013) 3.56 ± 0.13 (0.140 ± 0.005) 1.780 (0.070) MAX.1.19 (0.047) MAX. 2.54 (0.100) BSC DIMENSIONS IN MILLIMETERS (INCHES). LEAD COPLANARITY = 0.10 mm (0.004 INCHES). NOTE: FLOATING LEAD PROTRUSION IS 0.25 mm (10 mils) MAX. 0.254 + 0.076 - 0.051 (0.010 + 0.003) - 0.002)
The ASSR-1510, ASSR-1511, ASSR-1520 and ASSR-1530 are approved by the following organizations: UL Approved under UL 1577, component recognition program up to VISO = 3750 VRMS CSA Approved under CSA Component Acceptance Notice #5. Insulation and Safety Related Specifi cations Parameter Symbol ASSR-1510 ASSR-1511 ASSR-1520 ASSR-1530 Units Conditions Minimum External Air Gap (Clearance) L(101) 4.9 7.1 4.9 mm Measured from input terminals to output terminals, shortest distance through air. Minimum External Tracking (Creepage) L(102) 4.9 7.4 4.8 mm Measured from input terminals to output terminals, shortest distance path along body. Minimum Internal Plastic Gap (Internal Clearance) 0.08 0.08 0.08 mm Through insulation distance conductor to conductor, usually the straight line distance thickness between the emitter and detector. Tracking Resistance (Comparative Tracking Index) CTI 175 175 175 V DIN IEC 112/VDE 0303 Part 1 Isolation Group (DIN VDE0109) IIIa IIIa IIIa Material Group (DIN VDE 0109) Lead Free IR Profi le 217°C RAMP-DOWN 6°C/SEC. MAX. RAMP-UP 3°C/SEC. MAX. 150 - 200°C 260 +0/-5°C t 25°C to PEAK 60 to 150 SEC. 20-40 SEC. TIME WITHIN 5°C of ACTUAL PEAK TEMPERATUREtp ts PREHEAT 60 to 180 SEC. tL TL Tsmax Tsmin Tp TIME (SECONDS) TEMPERATURE (°C) NOTES: THE TIME FROM 25°C to PEAK TEMPERATURE = 8 MINUTES MAX. Tsmax = 200°C, Tsmin = 150°C Use of non-chlorine-activated fluxes is highly recommended.
Parameter Symbol Min. Max. Units Note Storage Temperature T S -55 125 C Operating Temperature T A -40 85 C Junction Temperature T J 125 C Lead Soldering Cycle Temperature 260 C Time 10 s Input Current Average I F 25 mA Surge 50 Transient 1000 Reversed Input Voltage V R 5V Input Power Dissipation ASSR-1510 P IN 40 mW ASSR-1511 P IN 40 mW ASSR-1520 ASSR-1530 PIN 80 mW Output Power Dissipation ASSR-1510 P O 500 mW ASSR-1511 P O 800 mW ASSR-1520 ASSR-1530 PO 700 mW Average Output Current (TA = 25°C, TC 100°C) IO 1.0 A 1 ASSR-1511 Connection B IO 2.0 A Output Voltage (TA = 25°C) V O -60 60 V 2 ASSR-1511 Connection B VO 06 0 V 2 Solder Refl ow Temperature Profi le See Lead Free IR Profi le Recommended Operating Conditions Parameter Symbol Min. Max. Units Note Input Current (ON) I F(ON) 32 0 m A 3 Input Voltage (OFF) V F(OFF) 0 0.8 V Operating Temperature T A -40 +85 C Package Characteristics Unless otherwise specifi ed, TA = 25°C. Parameter Sym. Min. Typ. Max. Units Conditions Note Input-Output Momentary Withstand Voltage VISO 3750 Vrms RH 50%, t = 1 min 4, 5 Input-Output Resistance R I-O 1012 VI-O = 500 Vdc Input-Output Capacitance ASSR-1510 C I-O 0.4 pF f = 1 MHz; V I-O = 0 Vdc 4 ASSR-1511 C I-O 0.5 pF f = 1 MHz; V I-O = 0 Vdc ASSR-1520 ASSR-1530 CI-O 0.8 pF f = 1 MHz; V I-O = 0 Vdc
Electrical Specifi cations (DC) Over recommended operating TA = -40°C to 85°C, IF = 5mA to 10mA, unless otherwise specifi ed. Output Withstand Voltage |VO(OFF)|6 0 6 5 V VF =0.8V, IO=250 A, TA=25C 55 V VF =0.8V, IO=250 A 5 Output Leakage Current IO(OFF) 0.5 100 nA VF =0.8V, VO=60V, TA=25C 1 A VF =0.8V, VO=60V 6 Output Off set Voltage |V(OS)|1 V IF =5mA, IO=0mA Input Reverse Breakdown Volt- age V R 5V IR =10 A Input Forward Voltage VF 1.1 1.3 1.65 V I F =5mA 8, 9 Output On-resistance R(ON) 0.35 0.5 IF =5mA, IO=1A, Pulse 30ms, TA=25C 10, 11 6 ASSR-1511 Connection B R (ON) 0.12 0.2 IF =5mA, IO=2A, Pulse 30ms, TA=25C Switching Specifi cations (AC) Over recommended operating TA = -40°C to 85°C, IF = 5mA to 10mA, unless otherwise specifi ed. Turn On Time T ON 0.5 1.0 ms IF =5mA, IO=1A, TA=25C 12, 16 2.0 ms I F =5mA, IO=1A 13 0.25 0.5 ms IF =10mA, IO=1A, TA=25C 1.0 ms I F =10mA, IO=1A Turn Off Time T OFF 0.03 0.2 ms IF =5mA, IO=1A, TA=25C 14, 16 0.5 ms I F =5mA, IO=1A 15 0.02 0.15 ms IF =10mA, IO=1A, TA=25C 0.2 ms I F =10mA, IO=1A Output Transient Rejection dVO/dt 1 7 kV/s VO=60V, TA=25C 17 Input-Output Transient Rejection dVI-O/dt 1 10 kV/ s VI-O=1000V, TA=25C 18 Notes: 1. For derating, refer to Figure 1, 2, 3 and 4. 2. The voltage across the output terminals of the relay should not exceed this rated withstand voltage. Over-voltage protection circuits should be added in some applications to protect against over-voltage transients. 3. Threshold to switch device is I F 0.5mA, however, for qualifi ed device performance over temperature range, it is recommended to operate at IF =5mA. 4. Device is considered as a two terminal device: ASSR-1510 - pin 1, 2 shorted and pin 3, 4 shorted. ASSR-1511 - pin 1, 2, 3 shorted and pin 4, 5, 6 shorted. ASSR-1520 and ASSR-1530 - pin 1, 2, 3, 4 shorted and pin 5, 6, 7, 8 shorted. 5. The Input-Output Momentary Withstand Voltage is a dielectric voltage rating that should not be interpreted as an input-outpu t continuous voltage rating. For the continuous voltage rating refer to the IEC/EN/DIN EN 60747-5-2 Insulation Characteristics Table (if app licable), your equipment level safety specifi cation, or Avago Technologies Application Note 1074, “Optocoupler Input-Output Endurance Voltage. ” 6. During the pulsed R (ON) measurement ( IO duration 30ms), ambient (TA) and case temperature (TC) are equal.
Figure 16. Switching Test circuit for tON , tOFF
Figure 17. Output Transient Rejection Test Circuit
Avago, Avago Technologies, and the A logo are trademarks of Avago Technologies in the United States and other countries. Figure 18. Input - Output Transient Rejection Test Circuit