ASSR-1420

ASSR-1410-003E AVAGO | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 15

Technical content

Features

• Compact Solid-State Bi-directional Signal Switch
• Single and Dual Channel Normally-off Single-Pole- Single-Throw (SPST) Relay
• 60V Output Withstand Voltage
• 0.6A or 1.2A Current Rating (See Schematic for ASSR-1411 Connection A and B)
• Low Input Current: CMOS Compatibility
• Low On-Resistance: 0.2 Ω Typical for DC-only, 0.7 Ω Typical for AC/DC
• Very High Output Off-state Impedance:

10 Teraohms Typical

• High Speed Switching: 0.1ms (Ton), 0.02ms (Toff ) Typical
• High Transient Immunity: >1kV/µs
• High Input-to-Output Insulation Voltage (Safety and Regulatory Approvals) - 3750 Vrms for 1 min per UL1577 - CSA Component Acceptance

Applications

• Telecommunication SwitchingTelecommunication Switching
• Data CommunicationsData Communications
• Industrial ControlsIndustrial Controls
• MedicalMedical
• SecuritySecurity
• EMR / Reed Relay ReplacementEMR / Reed Relay Replacement Truth Table Opto-isolation Turn-off Circuit Single Channel, SPST Relay,

1 Form A in 4-Pin SO Package

CAUTION: It is advised that normal static precautions be taken in handling and assembly of this component to prevent damage and/or degradation which may be induced by ESD. Lead (Pb) Free RoHS 6 fully compliant RoHS 6 fully compliant options available; -xxxE denotes a lead-free product

Ordering Information

ASSR-xxxx is UL Recognized with 3750 Vrms for 1 minute per UL1577 and is approved under CSA Component Ac - ceptance Notice #5, File CA 88324. Part number Option Package Surface Mount Gull Wing Tape & Reel QuantityRoHS Compliant ASSR-1410 -003E SO-4 X 100 units per tube -503E X X 1500 units per reel ASSR-1411 -001E 300mil DIP-6 50 units per tube -301E X X 50 units per tube -501E X X X 1000 units per reel ASSR-1420 -002E 300 mil DIP-8 50 units per tube -302E X X 50 units per tube -502E X X X 1000 units per reel To order, choose a part number from the part number column and combine with the desired option from the op - tion column to form an order entry. Example 1: ASSR-1411-501E to order product of 300mil DIP-6 Gull Wing Surface Mount package in Tape and Reel packaging and RoHS Compliant. Example 2: ASSR-1420-002E to order product of 300mil DIP-8 package in tube packaging and RoHS Compliant. Option datasheets are available. Contact your Avago sales representative or authorized distributor for information.

ASSR-1410 4-Pin Small Outline Package DIMENSIONS IN MILLIMETERS AND [INCHES] OPTION NUMBER 500 AND UL RECOGNITION NOT MARKED 0.46 0.018 0.5 0.02 0.5 0.02 2.0±0.2 0.07±0.00 0.102±0.102 0.004±0.004 0.20 0.008 4.3 ±0.2 0.16±0.008 2.54 0.100 4.40±0.20 0.173±0.008 0.41 0.016 6.8±0.4 0.268±0.016 TYPE NUMBER DATE CODE LEAD FREE 0.80 0.031 2.540 0.10 4.80 0.18 1.20 0.047 0.375 0.015 YWW xxxx LAND PATTERN RECOMMENDATION ASSR-1411 6-Pin DIP Package .40 (0.370) .0 (0.30) PIN ONE DOT A XXXX YYWW TYPE NUMBER DATE CODE 2.16 (0.085) 2.80 (0.110) (0.020) (0.040) 0.45 (0.018) 0.65 (0.025) 4.70 (0.185) MAX. 2.66 (0.105) MIN. 6.10 (0.240) 6.60 (0.260) 0.20 (0.008) 0.33 (0.013) 5¡ TYP. 7.36 (0.20) 7.88 (0.310) DIMENSIONS IN MILLIMETERS AND (INCHES). 321 1.78 (0.070) MAX. RU UL RECOGNITION LEAD FREE

1.080 ± 0.320 (0.043 ± 0.013) 2.54 ± 0.25 (0.100 ± 0.010) 0.51 (0.020) MIN. 0.65 (0.025) MAX. 4.70 (0.185) MAX. 2.2 (0.115) MIN. 5° TYP. 0.254 + 0.076 - 0.051 (0.010+ 0.003) - 0.002) 7.62 ± 0.25 (0.300 ± 0.010) 6.35 ± 0.25 (0.250 ± 0.010) .65 ± 0.25 (0.380 ± 0.010) A XXXX YYWW DATE CODE DIMENSIONS IN MILLIMETERS AND (INCHES). 5678 4321 OPTION CODE* UL RECOGNITION UR TYPE NUMBER OPTION NUMBERS 300 AND 500 NOT MARKED. 3.56 ± 0.13 (0.140 ± 0.005) LEAD FREE ASSR-1420 8-Pin DIP Package ASSR-1411 6-Pin DIP Package with Gull Wing Surface Mount Option 300 4.1 (0.165) 2.2 (0.00) 2.54 (0.100) TYP. 0.635 ± 0.130 (0.025 ± 0.005) .65 ± 0.25 (0.380 ± 0.010) 7.62 ± 0.25 (0.300 ± 0.010) 0.635 ± 0.25 (0.025 ± 0.010) 12¡ NOM. 0.20 (0.008) 0.30 (0.013) 1.78 (0.070) MAX. .65 ± 0.25 (0.380 ± 0.010) 6.35 ± 0.25 (0.250 ± 0.010) 1.27 (0.050) 10. (0.430) MAX. 2.0 (0.080) NOTE: FLOATING LEAD PROTRUSION IS 0.25 mm (10 mils) MAX. LAND PATTERN RECOMMENDATION

217°C RAMP-DOWN 6°C/SEC. MAX. RAMP-UP 3°C/SEC. MAX. 150 - 200°C 260 +0/-5°C t 25°C to PEAK 60 to 150 SEC. 20-40 SEC. TIME WITHIN 5°C of ACTUAL PEAK TEMPERATUREtp ts PREHEAT 60 to 180 SEC. tL TL Tsmax Tsmin Tp TIME (SECONDS) TEMPERATURE (°C) NOTES: THE TIME FROM 25°C to PEAK TEMPERATURE = 8 MINUTES MAX. Tsmax = 200°C, Tsmin = 150°C ASSR-1420 8-Pin DIP Package with Gull Wing Surface Mount Option 300 0.635 ± 0.25 (0.025 ± 0.010) 12° NOM. .65 ± 0.25 (0.380 ± 0.010) 0.635 ± 0.130 (0.025 ± 0.005) 7.62 ± 0.25 (0.300 ± 0.010) 5678 4321 .65 ± 0.25 (0.380 ± 0.010) 6.350 ± 0.25 (0.250 ± 0.010) 1.016 (0.040) 1.27 (0.050) 10. (0.430) 2.0 (0.080) LAND PATTERN RECOMMENDATION 1.080 ± 0.320 (0.043 ± 0.013) 3.56 ± 0.13 (0.140 ± 0.005) 1.780 (0.070) MAX.1.1 (0.047) MAX. 2.54 (0.100) BSC DIMENSIONS IN MILLIMETERS (INCHES). LEAD COPLANARITY = 0.10 mm (0.004 INCHES). NOTE: FLOATING LEAD PROTRUSION IS 0.25 mm (10 mils) MAX. 0.254 + 0.076 - 0.051 (0.010 + 0.003) - 0.002) Non-halide flux should be used.

The ASSR-1410, ASSR-1411 and ASSR-1420 are approved by the following organizations: UL Approval under UL 1577, component recognition program up to VISO = 3750 VRMS CSA Approval under CSA Component Acceptance Notice #5. Parameter Symbol ASSR-1410 ASSR-1411 ASSR-1420 Units Conditions Minimum External Air Gap (Clearance) L(101) 4.9 7.1 mm Measured from input terminals to output terminals, shortest distance through air. Minimum External Tracking (Creepage) L(102) 4.9 7.4 mm Measured from input terminals to output terminals, shortest distance path along body. Minimum Internal Plastic Gap (Internal Clearance) 0.08 0.08 mm Through insulation distance conductor to conductor, usually the straight line distance thickness between the emitter and detector. Tracking Resistance (Comparative Tracking Index) CTI 175 175 V DIN IEC 112/VDE 0303 Part 1 Isolation Group (DIN VDE0109) IIIa IIIa Material Group (DIN VDE 0109) Insulation and Safety Related Specifications

Parameter Symbol Min. Max. Units Note Storage Temperature TS -55 125 °C Operating Temperature TA -40 85 °C Junction Temperature TJ 125 °C Lead Soldering Cycle Temperature 260 °C Time 10 s Input Current Average IF 25 mA Surge 50 Transient 1000 Reversed Input Voltage VR 5 V Input Power Dissipation ASSR-1410 PIN 40 mW ASSR-1411 PIN 40 mW ASSR-1420 PIN 80 mW Output Power Dissipation ASSR-1410 PO 360 mW ASSR-1411 PO 720 mW ASSR-1420 PO 720 mW Average Output Current (TA = 25°C, TC ≤ 100°C) IO 0.6 A 1 ASSR-1411 Connection B IO 1.2 A Output Voltage (TA = 25°C) VO -60 60 V 2 ASSR-1411 Connection B VO 0 60 V Solder Reflow Temperature Profile See Lead Free IR Profile Recommended Operating Conditions Parameter Symbol Min. Max. Units Note Input Current (ON) IF(ON) 3 20 mA 3 Input Voltage (OFF) VF(OFF) 0 0.8 V Operating Temperature TA -40 +85 °C

Unless otherwise specified, TA = 25°C. Electrical Specifications (DC) Over recommended operating TA = -40°C to 85°C, IF = 5mA to 10mA, unless otherwise specified. Parameter Sym. Min. Typ. Max. Units Conditions Note Input-Output Momentary With- stand Voltage VISO 3750 Vrms RH ≤ 50%, t = 1 min 4, 5 Input-Output Resistance RI-O 1012 Ω VI-O = 500 Vdc Input-Output Capacitance ASSR-1410 CI-O 0.4 pF f = 1 MHz; VI-O = 0 Vdc ASSR-1411 CI-O 0.5 pF f = 1 MHz; VI-O = 0 Vdc ASSR-1420 CI-O 0.8 pF f = 1 MHz; VI-O = 0 Vdc Output Withstand Voltage |VO(OFF)| 60 65 V VF =0.8V, IO=250 µA, TA=25°C 55 V VF =0.8V, IO=250 µA 5 Output Leakage Current IO(OFF) 0.5 100 nA VF =0.8V, VO=60V, TA=25°C 1 µA VF =0.8V, VO=60V 6 Output Offset Voltage |V(OS)| 1 µV IF =5mA, IO=0mA Input Reverse Breakdown Voltage VR 5 V IR =10 µA Input Forward Voltage VF 1.1 1.3 1.65 V IF =5mA 7, 8 Output On-resistance R(ON) 0.7 1 Ω IF =5mA, IO=600mA, Pulse ≤30ms, TA=25°C 9, 10 6 ASSR-1411 Connection B R(ON) 0.2 0.5 Ω IF =5mA, IO=1.2A, Pulse ≤30ms, TA=25°C

Switching Specifications (AC) Over recommended operating TA = -40°C to 85°C, IF = 5mA to 10mA, unless otherwise specified. Notes: 1. For derating, refer to Figure 1, 2, 3 and 4. 2. The voltage across the output terminals of the relay should not exceed this rated withstand voltage. Over-voltage protection circuits should be added in some applications to protect against over-voltage transients. 3. Threshold to switch device is IF ≥ 0.5mA, however, for qualified device performance over temperature range, it is recommended to operate at IF =5mA. 4. Device is considered as a two terminal device: ASSR-1410 - pin 1, 2 shorted and pin 3, 4 shorted. ASSR-1411 - pin 1, 2, 3 shorted and pin 4, 5, 6 shorted. ASSR-1420 - pin 1, 2, 3, 4 shorted and pin 5, 6, 7, 8 shorted. 5. The Input-Output Momentary Withstand Voltage is a dielectric voltage rating that should not be interpreted as an input-output continuous voltage rating. For the continuous voltage rating refer to the IEC/EN/DIN EN 60747-5-2 Insulation Characteristics Table (if applicable), your equipment level safety specification, or Avago Technologies Application Note 1074, “Optocoupler Input-Output Endurance Voltage. ” 6. During the pulsed R(ON) measurement ( IO duration ≤30ms), ambient (TA) and case temperature (TC) are equal. Turn On Time TON 0.25 0.5 ms IF =5mA, IO=600mA, TA=25°C 11, 1.0 ms IF =5mA, IO=600mA 12 0.1 0.25 ms IF =10mA, IO=600mA, TA=25°C 0.5 ms IF =10mA, IO=600mA Turn Off Time TOFF 0.02 0.2 ms IF =5mA, IO=600mA, TA=25°C 13, 0.5 ms IF =5mA, IO=600mA 14 0.02 0.15 ms IF =10mA, IO=600mA, TA=25°C 0.2 ms IF =10mA, IO=600mA Output Transient Rejection dVO/dt 1 7 kV/µs DVO=60V, TA=25°C 16 Input-Output Transient Rejection dVI-O/dt 1 ≥10 kV/µs DVI-O=1000V, TA=25°C 17

Figure 15. Switching Test circuit for tON , tOFF

Figure 16. Output Transient Rejection Test Circuit

Avago, Avago Technologies, and the A logo are trademarks of Avago Technologies, Limited, in the United States and other countries. Figure 17. Input - Output Transient Rejection Test Circuit