ASDX015A24R-A SENSORTECHNICS | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 5
Technical content
Signal conditioned high precision pressure transducers 1/5February 2009 / 609 www.sensortechnics.com ELECTRICAL CONNECTION
FEATURES
- Absolute, gage or differential pressure
- 0.5 to 4.5 V ratiometric output
- Precision ASIC conditioning
- Temperature compensated
- Total accuracy ±0.5 to ±1.0 %FSS SPECIFICATIONS Maximum ratings Supply voltage VS 4.75 V to 5.25 VDC max. 6.50 VDC Output current Sink 2 mA Source 2 mA Lead temperature (2 - 4 sec.) 250°C Temperature ranges Compensated 0 to +85 °C Operating -20 to +105 °C Storage -40 to +125 °C Vibration 10 g at 20 - 2000 Hz Shock 100 g for 11 ms Caution!The sensor is not reverse polarity protected. Incorrect applications of excitation voltage or ground to the wrong pin can cause electrical failure. Application of supply voltage above the maximum can cause electrical failure. ASDX A-grade 15 nF 220 nF 5 6 7 8 4 +Vs Vout GND3 N/C N/C Note: Capacitor 220 nF required between +Vs and GND and 15 nF between Vout and GND. It is important to place the capacitors as close to the pins as possible! Pins 4, 5, 6, 7 and 8 are internal device connections and should not be connected for any reason!
Signal conditioned high precision pressure transducers 2/5February 2009 / 609 www.sensortechnics.com PRESSURE RANGES SPECIFICATIONS (VS = 5.0 VDC , TA = 25°C) traPr ebmune gnarerusserPt sruBe russerp 1 ).pyt(ytivitisneS A-R42A510XDSA5 1ot0 )a(isp )a(isp 72.0 isp/V A-R42A030XDSA0 3ot00 63 1.0 A-R42A001XDSA0 01ot00 514 0.0 A-R44D/A-R42G100XDSA1 ot0 )d,g(isp )d,g(isp 00.4 A-R44D/A-R42G500XDSA5 ot00 20 8.0 A-R44D/A-R42G510XDSA5 1ot00 37 2.0 A-R44D/A-R42G030XDSA0 3ot00 63 1.0 A-R44D/A-R42G001XDSA0 01ot00 514 0.0 A-D44D100XDSA1 ±ot05 0 0.2 A-D44D500XDSA5 ±ot00 20 4.0 A-D44D510XDSA5 1±ot00 33 1.0 Specification notes: 1. If maximum burst pressure is exceeded, even momentarily, the package may leak or burst, or the pressure sensing die may fracture. 2. Full Scale Span (FSS) is the algebraic difference between the output signal for the highest and lowest specified pressure. Span is ratiometric to the supply voltage. 3. Total accuracy is the combined error of offset and span calibration, linearity, pressure hysteresis and temperature effects. Linearity is the measured deviation based on a straight line. Hysteresis is the maximum output difference at any point within the operating pressure range for increasing and decreasing pressure. Calibration errors include the deviation of offset and full scale from nominal values. 4. Delay time between sampling and signal change at the output. 5. The smallest change in the output voltage, given any change in pressure.
Signal conditioned high precision pressure transducers 3/5February 2009 / 609 www.sensortechnics.com PERFORMANCE CHARACTERISTICS 0.5 to 4.5 ratiometric output (VS = 5.0 VDC , TA = 25°C) scitsiretcarahC. niM. pyT. xaMs tinU V srehtolla8 4.20 5.22 5.2 )SSF(napselacslluF 2 00.4 srehtolla8 4.40 5.42 5.4 srehtolla8 4.00 5.02 5.0 )C°58ot0(ycaruccalatoT 3 ...100XDSA0 .1± SSF% srehtolla5 .0± etarelpmaS0 01z H 4yaledesnopseR 5 37.21 1.41s m petsnoitazitnauQ 5 2V m noitpmusnoctnerruC 6A m scitsiretcarahC. niM. pyT. xaMs tinU V srehtolla8 4.00 5.02 5.0 )SSF(napselacslluF 2 00.4 srehtolla8 4.40 5.42 5.4 )C°58ot0(ycaruccalatoT 3 ...100XDSA0 .1± SSF% srehtolla5 .0± etarelpmaS0 01z H yaledesnopseR 4 37.21 1.41s m petsnoitazitnauQ 5 2V m noitpmusnoctnerruC 6A m All ASDX...D44D-A
Signal conditioned high precision pressure transducers 4/5February 2009 / 609 www.sensortechnics.com PHYSICAL DIMENSIONS D4 package G2 package A2 package third angle projection dimensions in mm (inches) 16.89 (0.665) 1.27 typ (0.050 typ) 13.97 (0.550) 16.64 ±0.64 (0.655 ±0.025) 8.89 (0.350) 7.87 typ (0.310 typ) 4.5 (0.177) 2.54 typ (0.100 typ) 8.26 typ (.325 typ) 1.78 (0.070) 3.63 (0.143) 3.38 (0.133) 8.13 (0.320) 0.51 typ (0.02 typ) Low pressure port High pressure port 2.29 (0.090) 4.5 (0.177) 16.64 ±0.64 (0.655 ±0.025) 16.89 (0.665)1.27 typ (0.050 typ) 13.97 (0.550) 8.89 (0.350) 8.0 typ (0.315 typ) 2.29 typ (0.090 typ) 8.46 (0.333) 2.54 typ (0.100 typ) 0.51 typ (0.02 typ) 2 ° typ 16.89 (0.665) 1.27 typ (0.050 typ) 13.97 (0.550) 3.15 (0.124) 4.9 (0.193) 16.64 ±0.64 (0.655 ± 0.025) 8.89 (0.350)5.08 (0.200) 2.29 typ (0.090 typ) 4.5 (0.177) 2.54 typ (0.100 typ) 0.51 typ (0.02 typ) 6.99 (0.275) 1.19 typ (0.047 typ) 2.79 typ (0.11 typ)
Signal conditioned high precision pressure transducers 5/5February 2009 / 609 www.sensortechnics.com
ORDERING INFORMATION
egnarerusserPe tulosbAe gaGe gaG/laitnereffiD isp1ot0A -R42G100XDSAA -R44D100XDSA isp5ot0A -R42G500XDSAA -R44D500XDSA isp51ot0A -R42A510XDSAA -R42G510XDSAA -R44D510XDSA isp03ot0A -R42A030XDSAA -R42G030XDSAA -R44D030XDSA isp001ot0A -R42A001XDSAA -R42G001XDSAA -R44D001XDSA isp1±ot0 A-D44D100XDSA isp5±ot0 A-D44D500XDSA isp51±ot0 A-D44D510XDSA ELECTRICAL CONNECTIONS ASDX...A24R-A Other pressure ranges or calibrations are available on request Sensortechnics reserves the right to make changes to any products herein. Sensortechnics does not assume any liability arising out of the application or use of any product or circuit described herein, neither does it convey any license under its patent rights nor the rights of others. Note: Pins 4, 5, 6, 7 and 8 are internal device connections and should not be connected for any reason! Vs (pin 1) identifier Vs (pin 1) identifier N/C N/C N/C N/C N/C N/C N/C N/C +Vs Vout GND N/C +Vs Vout GND N/C Vs (pin 1) identifier N/C N/C N/C N/C +Vs Vout GND N/C