AS72651 AMSOSRAM | Alldatasheet
Document overview
- Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
- PDF pages: 10
Technical content
DN [Document ID] ams Errata Sheet Page 1 [v1-07] 2018-May-15 Document Feedback AS72651 Errata Document of Datasheet Version 1-03 or later in combination with firmware Version V1.2.7 or later
[v1-07] 2018-May-15 Document Feedback Content Guide
[v1-07] 2018-May-15 Document Feedback Issues have been identified which can affect performance and are described in this Errata Sheet. 1. Deviation 1: AT co mmands page 50 figure 51 Description: This functionality will not work and a not a valid AT Command for new firmware update AT command ATLED0 Command Response Description and Parameters ATLED0=<value> OK Sets AS72651 LED_ IND: 100=ON,0=OFF(default value =0) ATLED0 <100|0>OK Reads AS72651 LED_IND setting: 100=ON, 0=OFF Workaround: This functionality cannot be implemented using the current firmware update and will be updated in the next firmware release 11Vx.x and later. 2. Deviation 2: AT co mmands page 50 figure 51 Description: This functionality will not work. AT command ATLED4 Command Response Description and Parameters ATLED4=<value> OK Sets AS72651 LED_IND: 100=ON,0=OFF(default value =0) ATLED4 <100|0>OK Reads AS72653 LED_IND setting: 100=ON, 0=OFF Workaround: This functionality cannot be implemented using the current firmware update and will be updated in the next firmware release 11Vx.x and later. 3. Deviation 3: AT co mmands page 51 figure 51 Description: This functionality will not work. AT command ATLED5 Command Response Description and Parameters ATLED5=<value> OK Sets AS72653 LED_DRV: 100=ON,0=OFF(default va lue =0)
[v1-07] 2018-May-15 Document Feedback Command Response Description and Parameters ATLED5 <100|0>OK Reads AS72653 LE D_DRV setting: 100=ON, 0=OFF Workaround This functionality cannot be implemented using the current firmware update and will be updated in the next firmware release 11Vx.x and later. 4. Deviation 4: AT comma nds page 51 figure. 51 Description: Software reset functionality- ATRST is replaced by new command in new firmware update. AT command ATRST Command Response Description and Parameters ATRST None Software Reset- no response Workaround: This functionality is cannot be implemented using the current firmware update and is replaced with a new command. ATRST replaced by ATSRST for the software reset. 5. Deviation 5: AT comma nds page 51 figure. 51 Description: This functionality will not work. AT command ATINTRP Command Response Description and Parameters ATINTRP= <value> OK Enables AS72651 interrupt operation; 1=ON, 0=OFF ATINTRP <100|0>OK Reads AS72651 Interrupt mode; 1=ON, 0=OFF Workaround: This functionality cannot be implemented using the current firmware update and will be updated in the next firmware release 11Vx.x and later.
[v1-07] 2018-May-15 Document Feedback 6. Deviation 6: Filter nam es in overview on page 3 Description: Same used filter names for AS72652 and AS72653 Workaround: Correction: the correct filter definition per AS7265x is listened here.
[v1-07] 2018-May-15 Document Feedback 7. Deviation 7: Typical AS7265x 18-Channel Application Circuit, page 52 Description: failed names in pins or connections (INT, ADDR, SDA, SCL)
[v1-07] 2018-May-15 Document Feedback Workaround: Correction: see the schematic for the reference design here.
[v1-07] 2018-May-15 Document Feedback 8. Contact Information For further information and requests, e-mail us at: ams_sales@ams.com For sales offices, distributors and representatives, please visit: www.ams.com/contact Headquarters ams AG Tobelbader Strasse 30
8141 Premstaetten
Austria, Europe Tel: +43 (0) 3136 500 0 Website: www.ams.com
[v1-07] 2018-May-15 Document Feedback 9. Copyrights & Disclaimer Copyright ams AG, Tobelbader Strasse 30, 8141 Premstaetten, Austria-Europe. Trademarks Registered. All rights reserved. The material herein may not be reproduced, adapted, merged, translated, stored, or used without the prior written consent of the copyright owner. Information in this document is believed to be accurate and reliable. However, ams AG does not give any representations or warranties, expressed or implied, as to the accuracy or completeness of such information and shall have no liability for the consequences of use of such information. Applications that are described herein are for illustrative purposes only. ams AG makes no representation or warranty that such applications will be appropriate for the specified use without further testing or modification. ams AG takes no responsibility for the design, operation and testing of the applications and end-products as well as assistance with the applications or end -product designs when using ams AG products. ams AG is not liable for the suitability and fit of a ms AG products in applications and end- products planned. ams AG shall not be liable to recipient or any third party for any damages, including but not limited to personal injury, property damage, loss of profits, loss of use, interruption of business or indirect, special, incidental or consequential damages, of any kind, in connection with or arising out of the furnishing, performance or use of the technical data or applications descri bed herein. No obligat ion or liability to recipient or any third party shall arise or flow out of ams AG rendering of technical or other services. ams AG reserves the right to change information in this document at any time and without notice.