AS098C100W ROITHNER | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 2
Technical content
20.09.2010 AS098C100W 1 of 2
High Power Stacked Infrared Laser Diode Array Features Applications
- Output Power: 100 W
- 920-980 nm Emission Wavelength
- Spectral Width: ≤4 nm
- High Reliability, High Efficiency
- CW stack arrays adopt micro-channel package
- Laser Pumping
- Medical Usage
- High power laser diode applications Specifications (25°C) Item Symbol Value Unit Optical Specifications CW Output Power PO 100 W Output Power / Bar PS 20 W Array Length L 10 mm Center Wavelength λC 920-980 nm Wavelength Tolerance ± 5 nm Spectral Width Δλ ≤ 4 nm Package Style Micro Channel Bar Length 1.6 mm Number of Bars 5 Wavelength Temperature Coefficient 0.3 nm/°C Beam Divergence θ┴×θ║ 40x8 deg Electrical Specifications Slope Efficiency ES ≥ 0.8 W/A Conversion Efficiency NS ≥ 30% Threshold Current ITH ≤ 10 A Operating Current IF ≤ 30 A Operating Voltage UF ≤ 10 V Absolute Maximum Ratings Reverse Voltage UR 2.5 V Operating Temperature TOP +10 … +40 °C Storage Temperature TSTG -40 ... +85 °C
20.09.2010 AS098C100W 2 of 2
Micro Channel (Unit:mm) Notes 1. Caution! Don't look at the laser beam directly, because it's harmful to eyes. 2. The storage temperature is between -40 and 85 °C. 3. Under normal circumstances, the higher the temperature is, the shorter the life of semiconductor laser will be. It is recommended to use lasers under TEC cooling or in air- conditioned room. 4. To use a laser diode in following sequences: Turn on the power supply; connect to the laser diode; and then increase the current gradually to the specified operating value. To shut down the laser diode, please decrease the current to zero gradually, and then turn off the power. Please make sure that the power supply has no current overshoot at any time. The current overshoot can damage the laser diodes permanently. 5. The high power laser diode arrays are very sensitive to electrostatic. Please wear anti- static bracelet during operating with the laser diodes (arrays). 6. Be sure that the operating current does not exceed the specified operating current. Otherwise, it will accelerate laser aging, shorten lifetime or even damage devices permanently. 7. A clean, dry and ventilated environment should be available when storing and operating laser diodes (arrays). Dust may degrade the laser diodes (arrays). 8. Constant-current power supply with voltage regulator should be used to avoid surge.