DATASHEET SEARCH SITE | WWW.ALLDATASHEET.COM
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 4
Technical content
This document contains data proprietary to PUI Audio Inc. Any use or reproduction, in any form, without prior written permission of PUI Audio Inc. is prohibited. ©2018, PUI Audio Inc. PUI Audio, Inc., 3541 Stop Eight Road, Dayton, OH 45414 Tel: (937) 415-5901 Fax: (937) 415-5925 Data Sheet AS06606SR-R More than ever before, high quality audio is the determining factor that distinguishes your product from the fray. When the sound quality of your product is on the line, choose High Fidelity speakers from PUI Audio. The AS06606SR-R is a small, high-output, silk dome tweeter designed for frequencies above 2 kHz, allowing it to be used for siren applications and can also be used in combination with other speakers for high fidelity applications. Features:
- Silk dome diaphragm
- 30W max power handling (with 18 dB/octave 2 kHz high-pass filter)
- High-energy shielded motor design with large heatsink
- Capable of over 100 dB of output at 1 meter
- Three screw-hole mounting flange with waveguide
- Amplifier-friendly 6 ohm impedance Specifications Parameters Values Units Rated Input Power 15 Watts Max Input Power 30 Watts Impedance 6 ± 15% Ohms Sensitivity (SPL @ 1W/1m) Average 3, 5, 10, 15 kHz 90 ± 3 dB Resonant Frequency 1,800± 20% Hz Frequency Range 1,500 ~ 20,000 Hz Frame Material ABS - Magnet Material NdFeB - Weight 63 Grams
This document contains data proprietary to PUI Audio Inc. Any use or reproduction, in any form, without prior written permission of PUI Audio Inc. is prohibited. ©2018, PUI Audio Inc. PUI Audio, Inc., 3541 Stop Eight Road, Dayton, OH 45414 Tel: (937) 415-5901 Fax: (937) 415-5925 Specifications (continued) Buzz, Rattle, etc. Should not be audible with 6.7V sine wave from 1.5 kHz to 20 kHz with series 3.3µF non- polarized capacitor Polarity When positive voltage is applied to the positive terminal, the diaphragm will move outward Operating Temperature -10 ~ +60 °C Frequency and Impedance Response (IEC baffle with 2.45V input and microphone spaced at 1m)
This document contains data proprietary to PUI Audio Inc. Any use or reproduction, in any form, without prior written permission of PUI Audio Inc. is prohibited. ©2018, PUI Audio Inc. PUI Audio, Inc., 3541 Stop Eight Road, Dayton, OH 45414 Tel: (937) 415-5901 Fax: (937) 415-5925 Reliability Testing Type of Test Test Specifications High Temperature Test 48 hours at +60°C ± 2°C followed by three hours in normal room temperature Low Temperature Test 48 hours at -10°C ± 2°C followed by three hours in normal room temperature Humidity Test 48 hours at +40°C ± 3°C with relative humidity at 90%~95% followed by 6 hours in normal room temperature Drop Test 600mm ±25mm at 60°±5° Load Test 9.84V white noise signal applied for 48 hours with a series 3.3µF non-polarized capacitor After each test, the speaker’s SPL shall be ±3 dB of the original SPL Dimensions (Larger terminal is positive)
This document contains data proprietary to PUI Audio Inc. Any use or reproduction, in any form, without prior written permission of PUI Audio Inc. is prohibited. ©2018, PUI Audio Inc. PUI Audio, Inc., 3541 Stop Eight Road, Dayton, OH 45414 Tel: (937) 415-5901 Fax: (937) 415-5925 Specifications Revisions Revision Description Date - Released from Engineering 5/11/2018 Note: 1. Unless otherwise specified: A. All dimensions are in millimeters. B. Default tolerances are ±0.5mm and angles are ±3°. 2. Specifications subject to change or withdrawal without notice. 3. This part is RoHS 2011/65/EU Compliant.