APW703615KC-TU

APW7036 ANPEC | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 11

Technical content

/G43/G6F/G70/G79/G72/G69/G67/G68/G74/G20 /G41/G4E/G50/G45/G43/G20/G45/G6C/G65/G63/G74/G72/G6F/G6E/G69/G63/G73/G20/G43/G6F/G72/G70/G2E /G52/G65/G76/G2E/G20/G41/G2E/G31/G20/G2D/G20/G4D/G61/G79/G2C/G20/G32/G30/G30/G31 /G41/G50/G57/G37/G30/G33/G36 /G77/G77/G77/G2E/G61/G6E/G70/G65/G63/G2E/G63/G6F/G6D/G2E/G74/G77/G31 /G41/G4E/G50/G45/G43/G20/G72/G65/G73/G65/G72/G76/G65/G73/G20/G74/G68/G65/G20/G72/G69/G67/G68/G74/G20/G74/G6F/G20/G6D/G61/G6B/G65/G20/G63/G68/G61/G6E/G67/G65/G73/G20/G74/G6F/G20/G69/G6D/G70/G72/G6F/G76/G65/G20/G72/G65/G6C/G69/G61/G62/G69/G6C/G69/G74/G79/G20/G6F/G72/G20/G6D/G61/G6E/G75/G66/G61/G63/G74/G75/G72/G61/G62/G69/G6C/G69/G74/G79/G20/G77/G69/G74/G68/G6F/G75/G74/G20/G6E/G6F/G74/G69/G63/G65/G2C/G20/G61/G6E/G64/G20/G61/G64/G76/G69/G73/G65 /G63/G75/G73/G74/G6F/G6D/G65/G72/G73/G20/G74/G6F/G20/G6F/G62/G74/G61/G69/G6E/G20/G74/G68/G65/G20/G6C/G61/G74/G65/G73/G74/G20/G76/G65/G72/G73/G69/G6F/G6E/G20/G6F/G66/G20/G72/G65/G6C/G65/G76/G61/G6E/G74/G20/G69/G6E/G66/G6F/G72/G6D/G61/G74/G69/G6F/G6E/G20/G74/G6F/G20/G76/G65/G72/G69/G66/G79/G20/G62/G65/G66/G6F/G72/G65/G20/G70/G6C/G61/G63/G69/G6E/G67/G20/G6F/G72/G64/G65/G72/G73/G2E /G41/G64/G76/G61/G6E/G63/G65/G64/G20/G44/G75/G61/G6C/G20/G50/G57/G4D/G20/G50/G6F/G77/G65/G72/G20/G43/G6F/G6E/G74/G72/G6F/G6C/G6C/G65/G72

• •••• 2 Regulated Voltage are provided − SYNC Switching Power Internal Reference Voltage (1.25V , 1.5V , 1.8V and 2.05V) − ASYNC Switching Power Internal Reference Voltage (1.5V)
• •••• Simple Single-Loop Control Design − Voltage-Mode PWM Control
• •••• Excellent Output Voltage Regulation − SYNC Output : ±1% Over Temperature − ASYNC Output : ±3% Over Temperature
• •••• Fast Transient Response − High-Bandwidth Error Amplifier − Full 0% to 100% Duty Ratio
• •••• Power-Good Output Voltage Monitor
• •••• Over-Voltage and Over-Current Fault Monitors
• •••• Small Converter Size − Constant Frequency Operation(200kHz) − Programmable Oscillator from 50kHz to 800kHz − Reduce External Component Count
• •••• 20Pin , SOIC Package /G46/G65/G61/G74/G75/G72/G65/G73 /G41/G70/G70/G6C/G69/G63/G61/G74/G69/G6F/G6E/G73
• •••• High Power 5V to 2.5 or 3.3V DC-DC Regulator
• •••• VGA Card Power Regulation /G47/G65/G6E/G65/G72/G61/G6C/G20/G44/G65/G73/G63/G72/G69/G70/G74/G69/G6F/G6E The APW7036 provides complete power control and protection for two DC-DC converter optimized in VGA Card applications. It integrates two PWM controllers , as well as the monitoring and protection function into a single package. The APW7036 provides simple , single feedback loop , voltage mode control with fast transient response. The output voltage of the SYNC converter can be pre- cisely regulated to as low as V 8V and 2.05V) , with a maximum tolerence of ±1.0% over temperature. The APW7036 can provides in excess of 14A of out- put current for an on-board DC/DC converter. It can monitors all the output voltage , and a single Power Good signal is issued when the SYNC output is within ±10% of the V REF setting and the ASYNC output lev- els is above under-voltage levels. Additional built-in over-voltage protection for the SYNC output uses the lower MOSFET to prevent output voltage above 115% of the V REF setting. The PWM controller’s over-cur- rent function monitor the output current by sensing the voltage drop across the upper MOSFET’s R DS(ON) , eliminating the need for a current sensing resistor . /G50/G69/G6E/G20/G44/G65/G73/G63/G72/G69/G70/G74/G69/G6F/G6E VCC GATE PHASE2 FB2 OCSET1 FB1 COMP OCSET2 PGOOD SS VSEN NC VAUX GND PGND NC UGATE LGATE PHASE1 FAULT/RT

/G43/G6F/G70/G79/G72/G69/G67/G68/G74/G20 /G41/G4E/G50/G45/G43/G20/G45/G6C/G65/G63/G74/G72/G6F/G6E/G69/G63/G73/G20/G43/G6F/G72/G70/G2E /G52/G65/G76/G2E/G20/G41/G2E/G31/G20/G2D/G20/G4D/G61/G79/G2C/G20/G32/G30/G30/G31 /G41/G50/G57/G37/G30/G33/G36 /G77/G77/G77/G2E/G61/G6E/G70/G65/G63/G2E/G63/G6F/G6D/G2E/G74/G77/G32 /G4F/G72/G64/G65/G72/G69/G6E/G67/G20/G49/G6E/G66/G6F/G72/G6D/G61/G74/G69/G6F/G6E /G41/G62/G73/G6F/G6C/G75/G74/G65/G20/G4D/G61/G78/G69/G6D/G75/G6D/G20/G52/G61/G74/G69/G6E/G67/G73 Symbol Parameter Rating Unit VCC Supply Voltage 15 V VI , VO Input , Output or I/O Voltage GND -0.3 V to V12 +0.3 V TA Operating Ambient Temperature Range 0 to 70 °C TJ Junction Temperature Range 0 to 125 °C TSTG Storage Temperature Range -65 to +150 °C TS Soldering Temperature 300 ,10 seconds °C /G42/G6C/G6F/G63/G6B/G20/G44/G69/G61/G67/G72/G61/G6D GATE CONTROL SOFT-START AND FAULT LOGIC GATE CONTROL OCSET2 GATE PHASE2 FB2 GND PGND LGATE PHASE1 UGATE PGOOD OCSET1VSEN FB1SSFAULT 200uA VCC DRIVE2 OC2 INHIBIT PWM2 1.5V ERROR AMP2 1.05V VCC OSCILLATOR 4.5V V REF ERROR AMP1 0VFAULT OC1 PWM1 VCC LOWER DRIVE VCC DRIVE1 INHIBIT 115% 90% 110% 200uA COMP 28uA POR VAUX VCC APW7036 Voltage Code 12 : 1.25V 15 : 1.50V 18 : 1.80V 20 : 2.05V Package Code K : SOP-20 Temp. Range C : 0 to 70 C Handling Code TU : Tube TR : Tape & Reel Lead Free Code L : Lead Free Device Blank : Original Device Handling Code Temp. Range Package Code Voltage Code Lead Free Code

/G43/G6F/G70/G79/G72/G69/G67/G68/G74/G20 /G41/G4E/G50/G45/G43/G20/G45/G6C/G65/G63/G74/G72/G6F/G6E/G69/G63/G73/G20/G43/G6F/G72/G70/G2E /G52/G65/G76/G2E/G20/G41/G2E/G31/G20/G2D/G20/G4D/G61/G79/G2C/G20/G32/G30/G30/G31 /G41/G50/G57/G37/G30/G33/G36 /G77/G77/G77/G2E/G61/G6E/G70/G65/G63/G2E/G63/G6F/G6D/G2E/G74/G77/G33 /G54/G68/G65/G72/G6D/G61/G6C/G20/G43/G68/G61/G72/G61/G63/G74/G65/G72/G69/G73/G74/G69/G63/G73 Symbol Parameter Value Unit R θJA Thermal Resistance in Free Air SOIC SOIC (with 3in 2 of Copper) °C/W /G45/G6C/G65/G63/G74/G72/G69/G63/G61/G6C/G20/G43/G68/G61/G72/G61/G63/G74/G65/G72/G69/G73/G74/G69/G63/G73 (Recommended operating conditions , Unless otherwise noted) Refer to Block and Simplified Power System Diagrams , and Typical Application Schematic APW7036Symbol Parameter Test Conditions Min. Typ. Max. Unit VCC Supply Current ICC Nominal Supply Current UGATE , LGATE , GATE , open 9m A Power-on Reset Rising VCC Threshold Vocset=4.5V 10.4 V Falling VCC Threshold Vocset=4.5V 8.2 V Rising VAUX Threshold Vocset=4.5V 2.5 V VAUX Threshold Hysteresis Vocset=4.5V 0.5 V Rising VOCSET Threshold 1.26 V Oscillator FOCS Free Running Frequency RT= Open 185 200 215 kHz ∆VOSC Ramp Amplitude RT= Open 1.9 V P-P Switching Controller Reference Voltage VREF Reference Voltage APW7036-12 A P W 7 0 3 6 - 1 5 A P W 7 0 3 6 - 1 8 A P W 7 0 3 6 - 2 0 1.25 1.50 1.80 2.05 V Reference Voltage accuracy -1.0 +1.0 % VFB2 Reference Voltage 1.5 V Reference Voltage accuracy -3.0 +3.0 % Synchronous PWM Controller Error Amplifier DC Gain 88 dB GBWP Gain-Bandwidth Product 15 MHz SR Slew Rate COMP=10pF 6 V/µs PWM Controllers Gate Drivers IUGATE UGATE1,GATE Source V CC =12V, VUGATE 1,GATE =6V 1 A R UGATE UGATE1,GATE Sink V UGATE1,GATE =1V 3.5 Ω

/G43/G6F/G70/G79/G72/G69/G67/G68/G74/G20 /G41/G4E/G50/G45/G43/G20/G45/G6C/G65/G63/G74/G72/G6F/G6E/G69/G63/G73/G20/G43/G6F/G72/G70/G2E /G52/G65/G76/G2E/G20/G41/G2E/G31/G20/G2D/G20/G4D/G61/G79/G2C/G20/G32/G30/G30/G31 /G41/G50/G57/G37/G30/G33/G36 /G77/G77/G77/G2E/G61/G6E/G70/G65/G63/G2E/G63/G6F/G6D/G2E/G74/G77/G34 /G45/G6C/G65/G63/G74/G72/G69/G63/G61/G6C/G20/G43/G68/G61/G72/G61/G63/G74/G65/G72/G69/G73/G74/G69/G63/G73/G20/G43/G6F/G6E/G74/G2E /G46/G75/G6E/G63/G74/G69/G6F/G6E/G61/G6C/G20/G50/G69/G6E/G20/G44/G65/G73/G63/G72/G69/G70/G74/G69/G6F/G6E UGATE (Pin 1) Connect UGATE pin to the synchronous PWM converter’s upper MOSFET gate. This pin provides the gate drive for the upper MOSFET. VCC (Pin 2) Provide a 12V bias supply for the IC to this pin. This pin also provides the gate bias charge for all the MOSFETs controlled by the IC. The voltage at this pin is monitored for Power-On Reset purposes. GATE (Pin 3) Connect GATE pin to the standard BUCK PWM converter’s MOSFET gate. This pin provides the gate drive for the MOSFET. PHASE2 (Pin 4) Connect the PHASE2 pin to the standard BUCK PWM converter’s MOSFET source. This pin is used to moni- tor the voltage drop across the MOSFET for over-cur- rent protection. PGOOD (Pin 5) PGOOD is an open collector output used to indicate the status of the output voltages. This pin is pulled low when the synchronous regulator output is not within 10% of the reference voltage or the other output is below under-voltage thresholds. NC (Pin 10, 13) No Connection. OCSET1 , 2 (Pin 17 , 6) Connect a resistor (R OCSET ) from this pin to the drain of the PWM converter’s MOSFET. ROCSET , an internal 200µA current source (IOCSET ) , and the MOSFET’s on-resistance(rDS(ON) ) set the converter over-current APW7036Symbol Parameter Test Conditions Min. Typ. Max. Unit PWM Controllers Gate Drivers ILGATE LGATE Source V CC =12V, VLGATE =1V 1 A R LGATE LGATE Sink V LGATE = 1V 3 Ω Protection VSEN Over-Voltage (VSEN/VREF ) VSEN Rising 115 120 % IOVP FAULT Souring Current V FAULT/RT =2.0V 8.5 mA IOCSET OCSET1,2 Current Source V OCSET = 4.5VDC 170 200 230 µA ISS Soft Start Current 28 µA Power Good VSEN Upper Threshold (VSEN/VREF ) VSEN1 Rising 110 % VSEN Under Voltage (VSEN/VREF )VSEN1 Rising 94 % VSEN Hysteresis (VSEN/VREF ) Upper /Lower Threshold 2 % VPGOOD PGOOD Voltage Low I PGOOD = -4mA 0.8 V

/G43/G6F/G70/G79/G72/G69/G67/G68/G74/G20 /G41/G4E/G50/G45/G43/G20/G45/G6C/G65/G63/G74/G72/G6F/G6E/G69/G63/G73/G20/G43/G6F/G72/G70/G2E /G52/G65/G76/G2E/G20/G41/G2E/G31/G20/G2D/G20/G4D/G61/G79/G2C/G20/G32/G30/G30/G31 /G41/G50/G57/G37/G30/G33/G36 /G77/G77/G77/G2E/G61/G6E/G70/G65/G63/G2E/G63/G6F/G6D/G2E/G74/G77/G35 /G46/G75/G6E/G63/G74/G69/G6F/G6E/G61/G6C/G20/G50/G69/G6E/G20/G44/G65/G73/G63/G72/G69/G70/G74/G69/G6F/G6E/G20/G43/G6F/G6E/G74/G2E (OC) trip point according to the following equation: I PEAK An over-current trip cycles the soft-start function. FB2 (Pin 7) This pin provides the feedback for the non-synchro- nous switching regulator. A resistor driver is con- nected from this pin to regulator output and GND that sets the output voltage. The value of the resistor con- nected from regulator output to FB2 must be less than 150Ω . SS (Pin 8) Connect a capacitor from this pin to ground. This capacitor , along with an internal 28µA current source , sets the soft-start interval of the converter. FAULT / RT (Pin 9) This pin provides oscillator switching frequency adjustment. By placing a resistor (R T ) from this pin to GND , the nominal 200kHz switching frequency is increased. Conversely , connecting a pull-up resistor T ) from this pin to VCC reduces the switching frequency. Nominally , the voltage at this pin is 1.26V. In the event of an over-voltage or over-current condition , this pin is internally pulled to VCC. VAUX (Pin 11) The +3.3V input voltage at this pin is monitored for power-on reset (POR) purposes. GND (Pin 12) Signal ground for the IC. All voltage levels are mea- sured with respect to this pin. COMP and FB1 (Pins 14 , and 15) COMP and FB1 are the available external pins of the synchronous PWM regulator error amplifier. The FB1 pin is the inverting input of the error amplifier. Simi- larly , the COMP pin is the error amplifier output. These pins are used to compensate the voltage-mode con- trol feedback loop of the synchronous PWM converter. VSEN (Pin 16) This pin is connected to the synchronous PWM converters’s output voltage. The PGOOD and OVP comparator circuits use this signal to report output voltage status and for over-voltage protection. PGND (Pin 18) This is the power ground connection. Tie the syn- chronous PWM converter’s lower MOSFET source to this pin. LGATE (Pin19) Connect LGATE to the synchronous PWM converter’s lower MOSFET gate. This pin provides the gate drive for the lower MOSFET. PHASE1 (Pin 20) Connect the PHASE1 pin to the synchronous PWM converter’s upper MOSFET source. This pin is used to monitor the voltage drop across the upper MOSFET for over-current protection. I OCSET * ROCSET rDS(ON)

/G43/G6F/G70/G79/G72/G69/G67/G68/G74/G20 /G41/G4E/G50/G45/G43/G20/G45/G6C/G65/G63/G74/G72/G6F/G6E/G69/G63/G73/G20/G43/G6F/G72/G70/G2E /G52/G65/G76/G2E/G20/G41/G2E/G31/G20/G2D/G20/G4D/G61/G79/G2C/G20/G32/G30/G30/G31 /G41/G50/G57/G37/G30/G33/G36 /G77/G77/G77/G2E/G61/G6E/G70/G65/G63/G2E/G63/G6F/G6D/G2E/G74/G77/G36 /G53/G69/G6D/G70/G6C/G69/G66/G69/G65/G64/G20/G50/G6F/G77/G65/G72/G20/G53/G79/G73/G74/G65/G6D/G20/G44/G69/G61/G67/G72/G61/G6D /G54/G79/G70/G69/G63/G61/G6C/G20/G43/G68/G61/G72/G61/G63/G74/G65/G72/G69/G73/G74/G69/G63/G73 APW7036 +5 VIN Q3 Synchronous PWM Controller Standard Buck PWM Controller V OUT2 V OUT1 +5V VOUT2 (3.3V) VOUT1 (2.5V) +5V +12V C10 330uF R12 1.2K 220pF R13 5.1R APM9410 FM5800R9 120RF C11 330uF R10 100RF 5.1R Q1B APM7313 330uF 330uF 330uF 7.8uH Q1A APM7313 220pF 1.2KR3 5.1R 1uF 10R 7.8uH 1uH 10pF 2700pF R6 100RF 67RF 150K UGATE OCSET2 PGOOD PHASE2 GATE VCC NC SS FB2 FAULT GND FB1 COMP NC VAUX PGND OCSET1 VSEN LGATE PHASE1 APW7036-15 LP1 LED R11 750 +5V 0.1uF +3.3V

/G43/G6F/G70/G79/G72/G69/G67/G68/G74/G20 /G41/G4E/G50/G45/G43/G20/G45/G6C/G65/G63/G74/G72/G6F/G6E/G69/G63/G73/G20/G43/G6F/G72/G70/G2E /G52/G65/G76/G2E/G20/G41/G2E/G31/G20/G2D/G20/G4D/G61/G79/G2C/G20/G32/G30/G30/G31 /G41/G50/G57/G37/G30/G33/G36 /G77/G77/G77/G2E/G61/G6E/G70/G65/G63/G2E/G63/G6F/G6D/G2E/G74/G77/G37 /G54/G79/G70/G69/G63/G61/G6C/G20/G43/G68/G61/G72/G61/G63/G74/G65/G72/G69/G73/G74/G69/G63/G73 VREF Voltage deviation (%) Junction Temperature (oC) Junction Temperature ( oC) VFB2 Reference Voltage deviation (%) -1.0% -0.8% -0.6% -0.4% -0.2% 0.0% 0.2% 0.4% 0.6% 0.8% 1.0% 0 1 02 03 04 05 06 07 08 09 0 1 0 0 -1.0% -0.8% -0.6% -0.4% -0.2% 0.0% 0.2% 0.4% 0.6% 0.8% 1.0% 0 1 02 03 04 05 06 07 08 09 0 1 0 0 Note : The Referance Voltage(VREF ) Deviation is VREF (TJ) - VREF (25oC) VREF (25oC) x 100% Switching Frequency ( kHz ) 100 1000 10000 50 150 250 350 450 550 650 750 RT ( kΩ ) RT pull down to GND to +12V RT pull up

/G43/G6F/G70/G79/G72/G69/G67/G68/G74/G20 /G41/G4E/G50/G45/G43/G20/G45/G6C/G65/G63/G74/G72/G6F/G6E/G69/G63/G73/G20/G43/G6F/G72/G70/G2E /G52/G65/G76/G2E/G20/G41/G2E/G31/G20/G2D/G20/G4D/G61/G79/G2C/G20/G32/G30/G30/G31 /G41/G50/G57/G37/G30/G33/G36 /G77/G77/G77/G2E/G61/G6E/G70/G65/G63/G2E/G63/G6F/G6D/G2E/G74/G77/G38 /G50/G61/G63/G6B/G61/G67/G65/G20/G49/G6E/G66/G6F/G72/G6D/G61/G74/G69/G6F/G6E SO – 300mil ( Reference JEDEC Registration MS-013) Millimeters Variations Inches Variations C 0.23 0.32 C 0.0091 0.0125 D See variations D See variations E 7.40 7.60 E 0.2914 0.2992 e 1.27BSC e 0.050BSC H 10 10.65 H 0.394 0.419 h 0.25 0.75 h 0.010 0.029 L 0.40 1.27 L 0.016 0.050 φ 10 ° 8°φ 10 ° 8° 12 3 EH D L GAUGE PLANE e B A1 A C h*45

/G43/G6F/G70/G79/G72/G69/G67/G68/G74/G20 /G41/G4E/G50/G45/G43/G20/G45/G6C/G65/G63/G74/G72/G6F/G6E/G69/G63/G73/G20/G43/G6F/G72/G70/G2E /G52/G65/G76/G2E/G20/G41/G2E/G31/G20/G2D/G20/G4D/G61/G79/G2C/G20/G32/G30/G30/G31 /G41/G50/G57/G37/G30/G33/G36 /G77/G77/G77/G2E/G61/G6E/G70/G65/G63/G2E/G63/G6F/G6D/G2E/G74/G77/G39 /G50/G68/G79/G73/G69/G63/G61/G6C/G20/G53/G70/G65/G63/G69/G66/G69/G63/G61/G74/G69/G6F/G6E/G73 Terminal Material Solder-Plated Copper (Solder Material : 90/10 or 63/37 SnPb) Lead Solderability Meets EIA Specification RSI86-91, ANSI/J-STD-002 Category 3. Packaging 1000 devices per reel t 25 C to Peak tp Ramp-up tL Ramp-down ts Preheat Tsmax Tsmin T L T P Temperature Time Critical Zone T L to TP °/G20 Sn-Pb Eutectic Assembly Pb-Free Assembly Profile Feature Large Body Small Body Large Body Small Body Average ramp-up rate (TL to TP) 3°C/second max. 3 °C/second max. Preheat /G2D/G20Temperature Min (Tsmin) /G2D/G20Temperature Mix (Tsmax) /G2D/G20Time (min to max)(ts) 100°C 150°C 60-120 seconds 150°C 200°C 60-180 seconds Tsmax to TL - Ramp-up Rate 3°C/second max Tsmax to TL /G2D/G20Temperature(TL) /G2D/G20Time (tL) 183°C 60-150 seconds 217°C 60-150 seconds Peak Temperature(Tp) 225 +0/-5°C 240 +0/-5 °C 245 +0/-5 °C 250 +0/-5 °C Time within 5°C of actual Peak Temperature(tp) 10-30 seconds 10-30 seconds 10-30 seconds 20-40 seconds Ramp-down Rate 6°C/second max. 6 °C/second max. Time 25°C to Peak Temperature 6 minutes max. 8 minutes max. Note: All temperatures refer to topside of the package. Measured on the body surface. /G52/G65/G66/G6C/G6F/G77/G20/G43/G6F/G6E/G64/G69/G74/G69/G6F/G6E/G20(IR/Convection or VPR Reflow) /G43/G6C/G61/G73/G73/G69/G66/G69/G63/G61/G74/G69/G6E/G20/G52/G65/G66/G6C/G6F/G77/G20/G50/G72/G6F/G66/G69/G6C/G65/G73

/G43/G6F/G70/G79/G72/G69/G67/G68/G74/G20 /G41/G4E/G50/G45/G43/G20/G45/G6C/G65/G63/G74/G72/G6F/G6E/G69/G63/G73/G20/G43/G6F/G72/G70/G2E /G52/G65/G76/G2E/G20/G41/G2E/G31/G20/G2D/G20/G4D/G61/G79/G2C/G20/G32/G30/G30/G31 /G41/G50/G57/G37/G30/G33/G36 /G77/G77/G77/G2E/G61/G6E/G70/G65/G63/G2E/G63/G6F/G6D/G2E/G74/G77/G31/G30 /G54/G61/G70/G65/G20/G26/G20/G52/G65/G65/G6C/G20/G44/G69/G6D/G65/G6E/G73/G69/G6F/G6E/G73 /G52/G65/G6C/G69/G61/G62/G69/G6C/G69/G74/G79/G20/G74/G65/G73/G74/G20/G70/G72/G6F/G67/G72/G61/G6D Test item Method Description SOLDERABILITY MIL-STD-883D-2003 245°C , 5 SEC HOLT MIL-STD-883D-1005.7 1000 Hrs Bias @ 125 °C PCT JESD-22-B, A102 168 Hrs, 100 % RH , 121°C TST MIL-STD-883D-1011.9 -65°C ~ 150°C, 200 Cycles ESD MIL-STD-883D-3015.7 VHBM > 2KV, VMM > 200V Latch-Up JESD 78 10ms , I tr > 100mA t Ao E W Po P Ko Bo D F A J B C Application ABCJ T 1 T 2 WPE SOP-20 330±1 62 ± 1.5 12.75 Application F D D1 Po P1 Ao Bo Ko t ( m m )

/G43/G6F/G70/G79/G72/G69/G67/G68/G74/G20 /G41/G4E/G50/G45/G43/G20/G45/G6C/G65/G63/G74/G72/G6F/G6E/G69/G63/G73/G20/G43/G6F/G72/G70/G2E /G52/G65/G76/G2E/G20/G41/G2E/G31/G20/G2D/G20/G4D/G61/G79/G2C/G20/G32/G30/G30/G31 /G41/G50/G57/G37/G30/G33/G36 /G77/G77/G77/G2E/G61/G6E/G70/G65/G63/G2E/G63/G6F/G6D/G2E/G74/G77/G31/G31 /G43/G6F/G76/G65/G72/G20/G54/G61/G70/G65/G20/G44/G69/G6D/G65/G6E/G73/G69/G6F/G6E/G73 /G43/G75/G73/G74/G6F/G6D/G65/G72/G20/G53/G65/G72/G76/G69/G63/G65 Anpec Electronics Corp. Head Office : 5F, No. 2 Li-Hsin Road, SBIP, Hsin-Chu, Taiwan, R.O.C. Tel : 886-3-5642000 Fax : 886-3-5642050 Taipei Branch : 7F, No. 137, Lane 235, Pac Chiao Rd., Hsin Tien City, Taipei Hsien, Taiwan, R. O. C. Tel : 886-2-89191368 Fax : 886-2-89191369 Application Carrier Width Cover Tape Width Devices Per Reel SOP- 20 24 21.3 1000 /G20