APTB1615ESGC-F01 TO-GRACE | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 4

Technical content

© 2018 Kingbright. All Rights Reserved. Spec No: DSAF1101 / 1203002079 Rev No: V.13A Date: 06/21/2018 Page 1 / 4 Part Number Emitting Color (Material) Lens Type Iv (mcd) @ 20mA [2] Viewing Angle [1] Min. Typ. 2θ1/2 APTB1615ESGC-F01 ■ High Efficiency Red (GaAsP/GaP) Water Clear 8 15 *3 *7 ■ Super Bright Green (GaP) 5 12 *5 *12 150° DESCRIPTIONS z The High Efficiency Red source color devices are made with Gallium Arsenide Phosphide on Gallium Phosphide Orange Light Emitting Diode z The Super Bright Green source color devices are made with Gallium Phosphide Green Light Emitting Diode

FEATURES

z 1.6 mm x 1.5 mm SMD LED, 0.7 mm thickness z Low power consumption z Wide viewing angle z Ideal for backlight and indicator z Package: 2000 pcs / reel z Moisture sensitivity level: 3 z Tinned pads for improved solderability z RoHS compliant

APPLICATIONS

z Home and smart appliances z Wearable and portable devices z Healthcare applications PACKAGE DIMENSIONS SELECTION GUIDE Notes: 1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 of the optical peak value. 2. Luminous intensity / luminous flux: +/-15%. * Luminous intensity value is traceable to CIE127-2007 standards. APTB1615ESGC-F01 1.6 x 1.5 mm Bi-Color SMD Chip LED Lamp RECOMMENDED SOLDERING PATTERN (units : mm; tolerance : ± 0.1) Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.2(0.008") unless otherwise noted. 3. The specifications, characteristics and technical data described in the datasheet are subject to change without prior notice. 4. The device has a single mounting surface. The device must be mounted according to the specifications. A ll data sheet.com

© 2018 Kingbright. All Rights Reserved. Spec No: DSAF1101 / 1203002079 Rev No: V.13A Date: 06/21/2018 Page 2 / 4 ABSOLUTE MAXIMUM RATINGS at TA=25°C ELECTRICAL / OPTICAL CHARACTERISTICS at TA=25°C APTB1615ESGC-F01 Notes: 1. The dominant wavelength (λd) above is the setup value of the sorting machine. (Tolerance λd : ±1nm. ) 2. Forward voltage: ±0.1V. 3. Wavelength value is traceable to CIE127-2007 standards. 4. Excess driving current and / or operating temperature higher than recommended conditions may result in severe light degradation or premature failure. Notes: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. 2. Relative humidity levels maintained between 40% and 60% in production area are recommended to avoid the build-up of static electricity – Ref JEDEC/JESD625-A and JEDEC/J-STD-033. Parameter Symbol Emitting Color Value Unit Typ. Max. Wavelength at Peak Emission IF = 20mA λpeak High Efficiency Red Super Bright Green 627 565 - nm Dominant Wavelength IF = 20mA λdom [1] High Efficiency Red Super Bright Green 617 568 - nm Spectral Bandwidth at 50% Φ REL MAX IF = 20mA Δλ High Efficiency Red Super Bright Green - nm Capacitance C High Efficiency Red Super Bright Green - pF Forward Voltage IF = 20mA VF [2] High Efficiency Red Super Bright Green 2.0 2.2 2.5 2.5 V Reverse Current (VR = 5V) IR High Efficiency Red Super Bright Green - 10 uA Parameter Symbol Value Unit High Efficiency Red Super Bright Green Power Dissipation PD 75 62.5 mW Reverse Voltage VR 5 5 V Junction Temperature TJ 125 110 °C Operating Temperature Top -40 To +85 °C Storage Temperature Tstg -40 To +85 °C DC Forward Current IF 30 25 mA Peak Forward Current IFM [1] 160 140 mA Electrostatic Discharge Threshold (HBM) - 8000 8000 V A ll data sheet.com

© 2018 Kingbright. All Rights Reserved. Spec No: DSAF1101 / 1203002079 Rev No: V.13A Date: 06/21/2018 Page 3 / 4 TECHNICAL DATA 20% 40% 60% 80% 100% 350 400 450 500 550 600 650 700 750 800 T a = 25 °C Green Red Wavelength (nm) Relative Intensity (a. u.) RELATIVE INTENSITY vs. WAVELENGTH HIGH EFFICIENCY RED 0.50.5 0.0 -90° -75° -60° -45° -30° -15° 75° 60° 45° 30° 0° 15° 90° 1.01.0 Ta = 25 °C SPATIAL DISTRIBUTION APTB1615ESGC-F01 SUPER BRIGHT GREEN Ta = 25 °C Forward voltage (V) Forward current (mA) 0.0 0.5 1.0 1.5 2.0 2.5 0 1 02 03 04 05 0 T a = 25 °C Forward current (mA) Luminous intensity normalised at 20 mA - 4 0 - 2 0 0 2 04 06 08 0 1 0 0 Ambient temperature (°C) Permissible forward current (mA) 0.0 0.5 1.0 1.5 2.0 2.5 - 4 0 - 2 00 2 04 06 08 0 1 0 0 Ambient temperature (°C) Luminous intensity normalised at Ta = 25 °C Forward Current vs. Forward Voltage Luminous Intensity vs. Forward Current Forward Current Derating Curve Luminous Intensity vs. Ambient Temperature Ta = 25 °C Forward voltage (V) Forward current (mA) 0.0 0.5 1.0 1.5 2.0 2.5 0 1 02 03 04 05 0 T a = 25 °C Forward current (mA) Luminous intensity normalised at 20mA - 4 0 - 2 0 0 2 04 06 08 0 1 0 0 Ambient temperature (°C) Permissible forward current (mA) 0.0 0.5 1.0 1.5 2.0 2.5 - 4 0 - 2 00 2 04 06 08 0 1 0 0 Ambient temperature (°C) Luminous intensity normalised at Ta = 25 °C Forward Current vs. Forward Voltage Luminous Intensity vs. Forward Current Forward Current Derating Curve Luminous Intensity vs. Ambient Temperature A ll data sheet.com

© 2018 Kingbright. All Rights Reserved. Spec No: DSAF1101 / 1203002079 Rev No: V.13A Date: 06/21/2018 Page 4 / 4 APTB1615ESGC-F01 TAPE SPECIFICATIONS (units : mm) REEL DIMENSION (units : mm) PACKING & LABEL SPECIFICATIONS REFLOW SOLDERING PROFILE for LEAD-FREE SMD PROCESS Notes: 1. Don't cause stress to the LEDs while it is exposed to high temperature. 2. The maximum number of reflow soldering passes is 2 times. 3. Reflow soldering is recommended. Other soldering methods are not recommended as they might cause damage to the product. PRECAUTIONARY NOTES 1. The information included in this document reflects representative usage scenarios and is intended for technical reference on ly. 2. The part number, type, and specifications mentioned in this document are subject to future change and improvement without notice. Before production usage customer should refer to the latest datasheet for the updated specifications. 3. When using the products referenced in this document, please make sure the product is being operated within the environmental and electrical limits specified in the datasheet. If customer usage exceeds the specified limits, Kingbright will not be responsible for any subsequent issues. 4. The information in this document applies to typical usage in consumer electronics applications. If customer's application has special reliability requirements or have life-threatening liabilities, such as automotive or medical usage, please consult with Kingbright representative for further assistance. 5. The contents and information of this document may not be reproduced or re-transmitted without permission by Kingbright. 6. All design applications should refer to Kingbright application notes available at http://www.KingbrightUSA.com/ApplicationNotes A ll data sheet.com