APTB1612SGNC-F01 TO-GRACE | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 6
Technical content
SPEC NO: DSAF1098 REV NO: V.7A DATE: DEC/07/2016 PAGE: 1 OF 6 APPROVED: Wynec CHECKED: Allen Liu DRAWN: W.Q.Zhong ERP: 1203002044 1.6X1.25mm BI-COLOR SMD CHIP LED LAMP Part Number: APTB1612SGNC-F01 Super Bright Green Pure Orange Features z 1.6mmx1.25mm SMD LED, 0.65mm thickness. z Bi-color,low power consumption. z Wide viewing angle. z Ideal for backlight and indicator. z Package : 2000pcs / reel. z Moisture sensitivity level : level 3. z RoHS compliant. Descriptions z The Super Bright Green source color devices are made with Gallium Phosphide Green Light Emitting Diode. z The Pure Orange source color devices are made with Gallium Arsenide Phosphide on Gallium Phosphide Pure Orange Light Emitting Diode. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.2(0.008") unless otherwise noted. 3.The specifications, characteristics and technical data described in the datasheet are subject to change without prior notice. 4.The device has a single mounting surface. The device must be mounted according to the specifications. GREEN ORANGE 香港至恩科技有限公司 www.to-grace.com 公司授权代理销售LITE-ON:光耦，贴片LED灯等 进口原装，现货供应，价格优势，技术支持 电话：0755-83464948 传真：0755-83464076 A ll data sheet.com
SPEC NO: DSAF1098 REV NO: V.7A DATE: DEC/07/2016 PAGE: 2 OF 6 APPROVED: Wynec CHECKED: Allen Liu DRAWN: W.Q.Zhong ERP: 1203002044 Selection Guide Absolute Maximum Ratings at TA=25°C Electrical / Optical Characteristics at TA=25°C Part No. Emitting Color (Material) Lens Type Iv (mcd) [2] @ 20mA Viewing Angle [1] Min. Typ. 2 θ1/2 APTB1612SGNC-F01 Super Bright Green (GaP) Water Clear 5 12 150° *5 *12 8 15 *3 *8 Pure Orange (GaAsP/GaP) Symbol Parameter Emitting Color Typ. Max. Units Test Conditions λpeak Peak Wavelength Super Bright Green Pure Orange 565 607 nm I F=20mA λD [1] Dominant Wavelength Super Bright Green Pure Orange 568 602 nm I F=20mA Δλ1/2 Spectral Line Half-width Super Bright Green Pure Orange 35 nm I F=20mA C Capacitance Super Bright Green Pure Orange 15 pF V F=0V;f=1MHz VF [2] Forward Voltage Super Bright Green Pure Orange 2.2 2.05 2.5
2.5 V I
F=20mA IR Reverse Current Super Bright Green Pure Orange 10 10 uA V R = 5V Parameter Super Bright Green Pure Orange Units Power dissipation 62.5 62.5 mW DC Forward Current 25 25 mA Peak Forward Current [1] 140 145 mA Reverse Voltage 5 V Operating Temperature -40°C To +85°C Storage Temperature -40°C To +85°C Notes: 1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 of the optical peak value. 2. Luminous intensity / luminous Flux: +/-15%. * Luminous intensity value is traceable to CIE127-2007 standards. Notes: 1. Wavelength: +/-1nm. 2. Forward Voltage: +/-0.1V. 3. Wavelength value is traceable to CIE127-2007 standards. 4. Excess driving current and / or operating temperature higher than recommended conditions may result in severe light degradation or premature failure. Notes: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. 2. Relative humidity levels maintained between 40% and 60% in production area are recommended to avoid the build-up of static electricity – Ref JEDEC/JESD625-A and JEDEC/J-STD-033. A ll data sheet.com
SPEC NO: DSAF1098 REV NO: V.7A DATE: DEC/07/2016 PAGE: 3 OF 6 APPROVED: Wynec CHECKED: Allen Liu DRAWN: W.Q.Zhong ERP: 1203002044 0.50.5 0.0 -90° -75° -60° -45° -30° -15° 75° 60° 45° 30° 0° 15° 90° 1.01.0 Ta = 25 °C APTB1612SGNC-F01 Super Bright Green 20% 40% 60% 80% 100% 350 400 450 500 550 600 650 700 750 800 Ta = 25 °C Super Bright Green Wavelength (nm) Relative Intensity (a. u.) Pure Orange A ll data sheet.com
SPEC NO: DSAF1098 REV NO: V.7A DATE: DEC/07/2016 PAGE: 4 OF 6 APPROVED: Wynec CHECKED: Allen Liu DRAWN: W.Q.Zhong ERP: 1203002044 Pure Orange A ll data sheet.com
SPEC NO: DSAF1098 REV NO: V.7A DATE: DEC/07/2016 PAGE: 5 OF 6 APPROVED: Wynec CHECKED: Allen Liu DRAWN: W.Q.Zhong ERP: 1203002044 APTB1612SGNC-F01 Reflow soldering is recommended and the soldering profile is shown below. Other soldering methods are not recommended as they might cause damage to the product. Recommended Soldering Pattern (Units : mm; Tolerance: ± 0.1) Reel Dimension Tape Dimensions (Units : mm) A ll data sheet.com
SPEC NO: DSAF1098 REV NO: V.7A DATE: DEC/07/2016 PAGE: 6 OF 6 APPROVED: Wynec CHECKED: Allen Liu DRAWN: W.Q.Zhong ERP: 1203002044 PACKING & LABEL SPECIFICATIONS APTB1612SGNC-F01 Terms and conditions for the usage of this document 1. The information included in this document reflects representative usage scenarios and is intended for technical reference only. 2. The part number, type, and specificatio ns mentioned in this document are subjec t to future change and improvement without notice. Before production usage customer should refer to the latest datasheet for the updated specifications. 3. When using the products referenced in this document, please make sure the product is being operated within the environmental and electrical limits specified in the datasheet. If customer us age exceeds the specified limits, Kingbright will not be responsible for any subsequent issues. 4. The information in this document applies to typical usage in consumer electronics applicati ons. If customer's application ha s special reliability requirements or have life-threatening liabilitie s, such as automotive or medical usage, please consult with Kingbright representative for further assistance. 5. The contents and information of this document may not be reproduced or re-transmitted without permission by Kingbright. 6. All design applications should refer to Kingbright application notes available at http://www.KingbrightUSA.com/ApplicationNotes A ll data sheet.com