APTB1612CGKQWDF-AMT

APTB1612CGKQWDF-AMT TO-GRACE | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 9

Technical content

Features

LED package. z 1.6mm x1.25mm SMD LED, 0.65mm thickness. z Bi-color,low power consumption. z Wide viewing angle. z Ideal for backlight and indicator. z Package : 2000pcs / reel. z Moisture sensitivity level : level 3. z RoHS compliant. Des cription z Th e Green source color devices are made with AlGaInP on GaAs substrate Light Emitting Diode. z The source color devices are made with InGaN Light Emitting Diode. z Electrostatic discharge and power surge could damage the LEDs. z It is recommended to use a wrist band or anti- electrostatic glove when handling the LEDs. z All devices, equipments and machineries must be electrically grounded. Packag e Dimensions Not es: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.2(0.008") unless otherwise noted. 3.The specifications, characteristics and technical data described in the datasheet are subject to change without prior notice. 4.The device has a single mounting surface. The device must be mounted according to the specifications. Applica tions z T raffic signaling. z Backlighting (illuminated advertising , general lighting). z Interior and exterior automotive lighting. z Substitution of micro incandescent lamps. z Reading lamps. z Signal and symbol luminaire for orientation. z Marker lights (e.g. Steps, exit ways, etc). z Decorative and entertainment lighting. z Indoor and outdoor commercial and residential architectural lighting. GREEN WHITE 香港至恩科技有限公司 www.to-grace.com 公司授权代理销售LITE-ON:光耦，贴片LED灯等 进口原装，现货供应，价格优势，技术支持 电话：0755-83464948 传真：0755-83464076 A ll data sheet.com

SPEC NO: DSAL3635 REV NO: V.3B DATE: SEP/01/2015 PAGE: 2 OF 9 APPROVED: Wynec CHECKED: Allen Liu DRAWN: L.Q.Xie ERP: 1203012071 Selection Guide Notes: 1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 of the optical peak value. 2. Luminous intensity / luminous Flux: +/-15%. 3. Luminous intensity value is traceable to the CIE127-2007 compliant national standards. Part No. Emitting Color (Material) Lens Type Iv (mcd) [2] @ 20mA Viewing Angle [1] Code. Min. Max. 2 θ1/2 APTB1612CGKQWDF-AMT Green (AlGaInP) Yellow Fluorescent F 20 40 120° G 40 55 H 55 80 M 80 120 White (InGaN) N 120 200 P 200 300 Q 300 400 Parameter Symbol Value Unit Green White Power dissipation PD 75 80 mW Operating Temperature Top -40 To+ 100 °C Storage Temperature Tstg °C Junction temperature T J 115 115 °C DC Forward Current (TA=25°C) I F 30 20 mA Peak Forward Current [1] (TA=25°C) IFM 150 150 mA Reverse Voltage (TA=25°C) V R 5 5 V Electrostatic Discharge Threshold (HBM) 3000 250 V -40 To+ 110 Thermal resistance 1 chip on (typ.) (Junction/ambient) 2 chip on (typ.) 600 730 560 660 °C/W R th j-a Rth j-a Absolute Maximum Ratings at TA=25°C Note: 1.1/10 Duty Cycle, 0.1ms Pulse Width. A ll data sheet.com

SPEC NO: DSAL3635 REV NO: V.3B DATE: SEP/01/2015 PAGE: 3 OF 9 APPROVED: Wynec CHECKED: Allen Liu DRAWN: L.Q.Xie ERP: 1203012071 Electrical / Optical Characteristics at TA=25°C (Green) Parameter Symbol Value Unit Code. Min. Typ. Max. Wavelength at peak emission IF=20mA λ peak 574 nm Dominant Wavelength IF=20mA λ dom [1] nm 5 567 569 6 569 571 7 571 573 Spectral bandwidth at 50%Φ REL MAX IF=20mA Δλ 20 nm Forward Voltage IF=20mA VF [2] 2.1 2.5 V Reverse Current (VR = 5V) IR 10 uA Temperature coefficient of λ peak IF=20mA, -10 ° C≤ T≤100 ° C TC λ peak 0.12 nm/° C Temperature coefficient of λ dom IF=20mA, -10 ° C≤ T≤100 ° C TC λ dom 0.08 nm/° C Temperature coefficient of VF IF=20mA, -10 ° C≤ T≤100 ° C TCV -1.8 mV/° C Notes: 1.The dominant Wavelength (λ d) above is the setup value of the sorting machine. (Tolerance λ d : ±1nm. ) 2.Forward Voltage: +/-0.1V. 3.Wavelength value is traceable to the CIE127-2007 compliant national standards. 4.Excess driving current and/or operating temperature higher than recommended conditions may result in severe light degradation or premature failure. Electrical / Optical Characteristics at TA=25°C (White) Parameter Symbol Value Unit Chromaticity coordinate x acc.to CIE1931 IF=20mA [Typ.] x [1] 0.31 Chromaticity coordinate y acc.to CIE1931 IF=20mA [Typ.] y [1] 0.31 Forward Voltage IF=20mA [Min.] VF [2] V Forward Voltage IF=20mA [Typ.] 3.3 Forward Voltage IF=20mA [Max.] 4.0 Temperature coefficient of VF IF=20mA, -10 ° C≤ T≤100 ° C [Typ.] TCV -2.0 mV/° C Temperature coefficient of x IF=20mA, -10 ° C≤ T≤100 ° C [Typ.] TCX -0.18 10-3/° C Temperature coefficient of y IF=20mA, -10 ° C≤ T≤100 ° C [Typ.] TCy -0.20 10-3/° C Reverse Current (VR = 5V) [Max.] IR 50 uA Notes: 1.Measurement tolerance of the chromaticity coordinates is ±0.01. 2.Forward Voltage: +/-0.1V. 3.Excess driving current and/or operating temperature higher than recommended conditions may result in severe light degradation or premature failure. A ll data sheet.com

SPEC NO: DSAL3635 REV NO: V.3B DATE: SEP/01/2015 PAGE: 4 OF 9 APPROVED: Wynec CHECKED: Allen Liu DRAWN: L.Q.Xie ERP: 1203012071 APTB1612CGKQWDF-AMT Green A ll data sheet.com

SPEC NO: DSAL3635 REV NO: V.3B DATE: SEP/01/2015 PAGE: 5 OF 9 APPROVED: Wynec CHECKED: Allen Liu DRAWN: L.Q.Xie ERP: 1203012071 White A ll data sheet.com

SPEC NO: DSAL3635 REV NO: V.3B DATE: SEP/01/2015 PAGE: 6 OF 9 APPROVED: Wynec CHECKED: Allen Liu DRAWN: L.Q.Xie ERP: 1203012071 APTB1612CGKQWDF-AMT 0.20 0.25 0.30 0.35 0.40 x y White CIE x y x y x y 0.263 0.213 0.282 0.245 0.298 0.271 0.313 0.296 0.329 0.325 0.329 0.325 0.358 0.372 0.329 0.371 0.363 0.400 0.306 0.332 0.329 0.371 Notes: Shipment may contain more than one chromaticity regions. Orders for single chromaticity region are generally not accepted. Measurement tolerance of the chromaticity coordinates is ±0.01. A ll data sheet.com

SPEC NO: DSAL3635 REV NO: V.3B DATE: SEP/01/2015 PAGE: 7 OF 9 APPROVED: Wynec CHECKED: Allen Liu DRAWN: L.Q.Xie ERP: 1203012071 APTB1612CGKQWDF-AMT Reflow soldering is recommended and the soldering profile is shown below. Other soldering methods are not recommended as they might cause damage to the product. Recommended Soldering Pattern (Units : mm; Tolerance: ± 0.1) Reel Dimension Tape Dimensions (Units : mm) A ll data sheet.com

SPEC NO: DSAL3635 REV NO: V.3B DATE: SEP/01/2015 PAGE: 8 OF 9 APPROVED: Wynec CHECKED: Allen Liu DRAWN: L.Q.Xie ERP: 1203012071 PACKING & LABEL SPECIFICATIONS APTB1612CGKQWDF-AMT Terms and conditions for the usage of this document 1. The information included in this document reflects representative usage scenarios and is intended for technical reference only. 2. The part number, type, and specifications mentioned in this document are subject to future change and improvement without notice. Before production usage customer should refer to the latest datasheet for the updated specifications. 3. When using the products referenced in this document, please make sure the produc t is being operated within the environmental and electrical limits specified in the datasheet. If customer usage exceeds the specified limits, Kingbright will not be responsible for any subsequent issues. 4. The information in this document applies to typical usage in consumer electronics applicati ons. If customer's application ha s special reliability requirements or have life-threatening liabilities, such as automotive or m edical usage, please consult with Kingbright representative for further assistance. 5. The contents and information of this document may not be reproduced or re-transmitted without permission by Kingbright. 6. All design applications should refer to Kingbright application notes available at http://www.KingbrightUSA.com/ApplicationNotes A ll data sheet.com

SPEC NO: DSAL3635 REV NO: V.3B DATE: SEP/01/2015 PAGE: 9 OF 9 APPROVED: Wynec CHECKED: Allen Liu DRAWN: L.Q.Xie ERP: 1203012071 Reliability Test Items And Conditions The reliability of products shall be satisfied with items listed below Lot Tolerance Percent Defective (LTPD) : 10% No. Test Item Standards Test Condition Test Times / Cycles Number of Damaged

1 Continuous operating test - Ta =25°C ,IF = maximum rated current* 1,000 h 0 / 22

2 High Temp. operating test EIAJ ED- 4701/100(101) Ta = 100°C IF =derated current at 100°C 1,000 h 0 / 22 3 Low Temp. operating test - Ta = -40°C, IF = maximum rated current* 1,000 h 0 / 22 4 High temp. storage test EIAJ ED- 4701/100(201) Ta = maximum rated storage temperature 1,000 h 0 / 22 5 Low temp. storage test EIAJ ED- 4701/100(202) Ta = -40°C 1,000 h 0 / 22 6 High temp. & humidity storage test EIAJ ED- 4701/100(103) Ta = 60°C, RH = 90% 1,000 h 0 / 22 7 High temp. & humidity operating test EIAJ ED- 4701/100(102) Ta = 60°C, RH = 90% IF = derated current at 60°C 1,000 h 0 / 22

8 Resistance to Soldering Heat EIAJ ED-

4701/100(301) TSld=260±5°C, 10 sec 2 times 0 / 18

9 Thermal shock operating test - Ta = -40°C(15min) ~ 100°C(15min)

IF = derated current at 100°C 1,000 cycles 0 / 22

10 Thermal shock test - Ta = -40°C(15min) ~ 100°C(15min) 1,000 cycles 0 / 22

11 Electric Static Discharge (ESD) EIAJ ED-

4701/100(304) C = 100pF , R2 = 1.5KΩ V=3000V(Green) V = 250V(White) Once each Polarity 0 / 22

12 Vibration test - a = 196m/s² , f = 100~2KHz ,

t = 48min for all xyz axes 4 times 0 / 22 * : Refer to forward current vs. derating curve diagram Items Symbols Conditions Failure Criteria luminous Intensity lv IF = 20mA Testing Min. Value <Spec.Min.Value x 0.5 Forward Voltage VF IF = 20mA Testing Max. Value ≥Spec.Max.Value x 1.2 Reverse Current IR VR = Maximum Rated Reverse Voltage Testing Max. Value ≥Spec.Max.Value x 2.5 High temp. storage test - - Occurrence of notable decoloration, deformation and cracking Failure Criteria A ll data sheet.com