APT2012SF4C-PRV TO-GRACE | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 5

Technical content

Features

z 2.0mm x1.25mm SMD LED,0.75mm thickness. z Mechanically and spectrally matched to the phototransistor. z Package: 2000pcs / reel. z Moisture sensitivity level : level 3. z RoHS compliant. 香港至恩科技有限公司 www.to-grace.com 公司授权代理销售LITE-ON:光耦，贴片LED灯等 进口原装，现货供应，价格优势，技术支持 电话：0755-83464948 传真：0755-83464076 A ll data sheet.com

SPEC NO: DSAJ1371 REV NO: V.5B DATE: JAN/04/2017 PAGE: 2 OF 5 APPROVED: Wynec CHECKED: Allen Liu DRAWN: W.Q.Zhong ERP: 1203008893 Selection Guide Absolute Maximum Ratings at TA=25°C Electrical / Optical Characteristics at TA=25°C Part No. Emitting Color (Material) Lens Type Viewing Angle [1] Min. Typ. 2 θ1/2 APT2012SF4C-PRV Infrared (GaAlAs) Water Clear 0.8 1.5 160° Po (mW/sr) [2] @ 20mA Parameter P/N Symbol Typ. Max. Units Test Conditions Forward Voltage [1] SF4 VF 1.3 1.6 V I F=20mA Reverse Current SF4 I R 10 uA V R = 5V Capacitance SF4 C 90 pF V F=0V;f=1MHz Peak Spectral Wavelength SF4 λP 880 nm I F=20mA Spectral Bandwidth SF4 Δλ1/2 50 nm I F=20mA Parameter Symbol Values Units Power dissipation PD 80 mW DC Forward Current I F 50 mA Peak Forward Current [1] i FS 1.2 A Reverse Voltage V R 5 V Operating Temperature T A -40 To +85 °C Storage Temperature TSTG -40 To +85 °C Notes: 1. Forward Voltage: +/-0.1V. 2. Wavelength value is traceable to CIE127-2007 standards. 3. Excess driving current and/or operating temperature higher than recommended conditions may result in severe light degradation or premature failure. Notes: 1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 of the optical peak value. 2. Radiant Intensity/ luminous flux: +/-15%. 3. Radiant intensity value is traceable to CIE127-2007 standards. Notes: 1. 1/100 Duty Cycle, 10μs Pulse Width. 2. Relative humidity levels maintained between 40% and 60% in production area are recommended to avoid the build-up of static electricity – Ref JEDEC/JESD625-A and JEDEC/J-STD-033. A ll data sheet.com

SPEC NO: DSAJ1371 REV NO: V.5B DATE: JAN/04/2017 PAGE: 3 OF 5 APPROVED: Wynec CHECKED: Allen Liu DRAWN: W.Q.Zhong ERP: 1203008893 APT2012SF4C-PRV 20% 40% 60% 80% 100% 600 650 700 750 800 850 900 950 1000 1050 T a = 25 °C SF4 Wavelength (nm) Relative Intensity (a. u.) 0.5 0.5 90° 15°0° 30° 45° 60° 75° -15° -30° -45° -60° -75° -90° 0.01.0 1.0 Ta = 25 °C A ll data sheet.com

SPEC NO: DSAJ1371 REV NO: V.5B DATE: JAN/04/2017 PAGE: 4 OF 5 APPROVED: Wynec CHECKED: Allen Liu DRAWN: W.Q.Zhong ERP: 1203008893 APT2012SF4C-PRV Recommended Soldering Pattern (Units : mm; Tolerance: ± 0.1) Reel Dimension Tape Specifications (Units : mm) Reflow soldering is recommended and the soldering profile is shown below. Other soldering methods are not recommended as they might cause damage to the product. A ll data sheet.com

SPEC NO: DSAJ1371 REV NO: V.5B DATE: JAN/04/2017 PAGE: 5 OF 5 APPROVED: Wynec CHECKED: Allen Liu DRAWN: W.Q.Zhong ERP: 1203008893 PACKING & LABEL SPECIFICATIONS APT2012SF4C-PRV Terms and conditions for the usage of this document 1. The information included in this document reflects representative usage scenarios and is intended for technical reference only. 2. The part number, type, and specifications mentioned in this document are subject to future change and improvement without notice. Before production usage customer should refer to the latest datasheet for the updated specifications. 3. When using the products referenced in this document, please make sure the produc t is being operated within the environmental and electrical limits specified in the datasheet. If customer usage exceeds the specified limits, Kingbright will not be responsible for any subsequent issues. 4. The information in this document applies to typical usage in consumer electronics applicati ons. If customer's application ha s special reliability requirements or have life-threatening liabilities, such as automotive or m edical usage, please consult with Kingbright representative for further assistance. 5. The contents and information of this document may not be reproduced or re-transmitted without permission by Kingbright. 6. All design applications should refer to Kingbright application notes available at http://www.KingbrightUSA.com/ApplicationNotes A ll data sheet.com