APL1086-33UC-TR

APL1086 ANPEC | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 14

Technical content

Features

Applications

• •••• Active SCSI Terminators
• •••• Low Voltage Logic Supplies
• •••• Battery-Powered Circuitry
• •••• Post Regulator for Switching Power Supply General Description The APL1086 is a low dropout three-terminal adjust- able regulators with 1.5A output current capability. In order to obtain lower dropout voltage and faster transient response, which is critical for low voltage applications , the APL1086 has been optimized. The device is available in an adjustable version and fixed output voltages of 1.8V, 2.5V,2.85V and 3.3V, the output available voltage range is from 1.25~10. 7V with an input supply below 12V. Dropout voltage is guaranteed at a maximum of 1.45V at 1.5A. Current limit is trimmed to ensure specified output current and controlled short-circuit current. On-chip thermal limiting provides protection against any com- bination of overload that would create excessive junc- tion temperatures. The APL1086 is available in the industry standard 3- pin SOT-223, TO-252, TO-220 or TO-263 power packages. Pin Description Front View for TO-252 TAB IS VOUT 123 INOUTADJ/GND TAB IS VOUT INOUTADJ/GND 123 Front View for SOT-223

Copyright  ANPEC Electronics Corp. Rev. A.4 - Jun., 2003 APL1086 www.anpec.com.tw2 Ordering and Marking Information Symbol Parameter Rating Unit VI Input Voltage 12 V TJ Operating Junction Temperature Range Control Section Power Transistor 0 to 125 0 to 150 TSTG Storage Temperature Range -65 to +150 °C TL Lead Temperature (Soldering, 10 second) 260 °C Pin Description Front View for TO-220 Front View for TO-263

3 VIN

F : TO -220 G : TO -263 U : TO-252 V : SOT-223 Temp. Range C : 0 to 70 C Handling Code TU : Tube TR : Tape & Reel Voltage Code 18 : 1.8V 25 : 2.5V 285 : 2.85V 33 : 3.3V Blank : Adjustable Version APL1086- Handling Code Temp. Range Package Code Voltage Code APL1086 XXXXX25 XXXXX - Date CodeAPL1086- 25V : APL1086 XXXXX33 XXXXX - Date CodeAPL1086- 33V :APL1086 -33F/G/U: APL1086 XXXXX APL1086 -25F/G/U: APL1086 XXXXX APL1086 -18F/G/U: APL1086 XXXXX - Date CodeXXXXX

18 APL1086

XXXXX18 XXXXX - Date CodeAPL1086- 18V : APL1086 XXXXX285 XXXXX - Date CodeAPL1086- 285V APL1086 -285F/G/U: APL1086 XXXXX 285 APL1086 F/G/U : APL1086 XXXXX XXXXX - Date CodeAPL1086 V : - Date CodeXXXXX - Date CodeXXXXX - Date CodeXXXXX APL1086 XXXXX - Date CodeXXXXX Absolute Maximum Ratings

Copyright  ANPEC Electronics Corp. Rev. A.4 - Jun., 2003 APL1086 www.anpec.com.tw3

Electrical Characteristics

APL1086Symbol Parameter Test Conditions Min. Typ. Max. Unit VREF Reference Voltage 10mA ≤ IOUT ≤1.5A, 1.4V ≤(VIN -VOUT) ≤9.75V, TJ =0~125 °C 1.225 1.250 1.275 V Output Voltage APL1086-18 TJ =25°C, I OUT =0mA, TJ =0~125 °C, 0≤ IOUT≤ 1.5A, 3.5V ≤VIN≤9V, 1.782 1.764 1.800 1.800 1.818 1.836 APL1086-25 T J =25°C, I OUT =0mA, TJ =0~125 °C, 0≤ IOUT≤ 1.5A, 4V ≤VIN≤9V, 2.475 2.450 2.500 2.500 2.525 2.550 APL1086-28 T J =25°C, I OUT =0mA, TJ =0~125 °C, 0≤ IOUT≤ 1.5A, 4.25V ≤VIN≤9V, 2.822 2.792 2.850 2.850 2.878 2.910 VOUT APL1086-33 T J =25°C, I OUT =0mA, TJ =0~125 °C, 0≤ IOUT≤ 1.5A, 4.75V ≤VIN≤9V, 3.267 3.235 3.300 3.300 3.333 3.365 V Line Regulation APL1086 TJ =0~125 °C IOUT=10mA, 1.5V ≤VIN –VOUT≤9V, (note1) 0.03 0.2 APL1086-18 IOUT=0mA, 3.5V ≤VIN≤9V, (note1) 16 APL1086-25 IOUT=0A, 4V ≤VIN≤9V, (note 1) 16 APL1086-28 IOUT=0A, 4.25V ≤VIN ≤9V, (note 1) 16 REGLINE APL1086-33 IOUT=0A, 4.75V ≤VIN ≤ 9V, (note 1) 16 mV Load Regulation APL1086 TJ =0~125 °C (VIN -VOUT)=3V, 0≤ IOUT ≤1.5A ,(note 1) 0.1 0.4 APL1086-18 VIN=3.5V, 0≤ IOUT ≤1.5A ,(note 1) 11 0 APL1086-25 VIN=4V, 0≤ IOUT ≤1.5A ,(note 1) 11 0 APL1086-28 VIN=4.25V, 0 ≤ IOUT ≤1.5A ,(note 1) 11 0 REGLOAD APL1086-33 VIN=4.75V, 0 ≤ IOUT ≤1.5A ,(note 1) 11 0 mV VD Dropout Voltage IOUT=1.5A ,T J =0~125 °C 1.3 1.45 V ILIMIT Current Limit (VIN -VOUT)=5V, TJ=25°C 1500 mA IADJ Adjust Pin Current (VIN -VOUT)=3V, IOUT=10mA, T J=0~125 °C 60 120 µA ∆ IADJ Adjust Pin Current Change TJ=0~125 °C, 10mA ≤ IOUT ≤1.5A, 1.4V≤(VIN -VOUT) ≤7.75V 0.2 5 µA IO Minimum Load Current TJ=0~125 °C, (V IN -VOUT)=7.75V, (note 3) 1.7 mA PSRR Ripple Rejection FRIPPLE =120Hz, V RIPPLE =1VP-P , (VIN -VOUT)=3V, TJ=0~125 °C 60 75 dB TR Thermal Regulation TJ=25°C, 30ms Pulse 0.01 0.02 %/ W TS Temperature Stability 0.5 % LS Long -Term Stability TJ =125°C,1000Hrs. 0.3 %

Copyright  ANPEC Electronics Corp. Rev. A.4 - Jun., 2003 APL1086 www.anpec.com.tw4 APL1086Symbol Parameter Test Conditions Min. Typ. Max. Unit VN RMS Output Noise TJ=25°C,10Hz ≤F≤10kHz, (% of V OUT) 0.003 % θth Thermal Resistance Junction to Case, at Tab Junction to ambient 50 °C/ W OT Over Temperature Point 150 °C Quiescent Current APL1086-18 TJ=0~125 °C, VIN≤9V 5.5 10 APL1086-25 VIN≤9V 5.5 10 APL1086-28 VIN≤9V 5.5 10 APL1086-33 VIN≤9V 5.5 10 mA Application Circuits * C1 improves ripple rejection. XC should be approximately equal to R1 at ripple frequency* Needed if device is far from filter capacitors 1.25V to 10.7V Adjustable Regulator Impro ving Ripple Rejection /G52/G31 /G52/G32/G52/G31/G31/G2E/G32/G35/G30/G56/G56/G4F/G55/G54 +×= VIN 10µ F APL1086 OUTIN ADJ TTL 121 Ω 365 Ω 1k 100µ F 5V Regulator with Shutdown VIN 10µ F APL1086 OUTIN ADJ 121Ω 365Ω VOUT 150µ F 10µ F R2 + VIN 10µ F C1* VOUT1 APL1086 OUTIN ADJ + 100µ F 121 Ω Note 1: See thermal regulation specifications for changes in output voltage due to heating effects. Load line regulations are mea- sured at a constant junction temperature by low duty cycle pulse testing. Note 2: Dropout voltage is specified over the full output current range of the device. Dropout voltage is defined as the minimum input/ output differential measured at the specified output current. Test points and limits are also shown on the Dropout Voltage curv e. Note 3: Minimum load current is defined as the minimum output current required to maintain regulation. Electrical Characteristics (Cont.)

Copyright  ANPEC Electronics Corp. Rev. A.4 - Jun., 2003 APL1086 www.anpec.com.tw5 0.9 0.95 1.05 1.1 1.15 1.2 1.25 1.3 1.35 00 . 511 . 5 Dropout Voltage (V) 0.5 1.5 2.5 3.5 4.5 -100 100 300 500 700 900 -0.03 -0.02 -0.01 0.01 0.02 Typical Characteristics -20 30 80 130 180 -0.05 0.05 0.1 0.15 Dropout Voltage vs. Output Current 0.5 1.5 2.5 3.5 0123456789 Output Voltage (V) Output Voltage vs. Input Voltage Output Current (A) Input Voltage (V) Load Transient Response Output Current (A) Output Voltage Deviation (V) Time (µs) Line Transient Response Input Voltage (V) Output Voltage Deviation (V) Time (µs) CIN=10uF Cout=10uF Tantalum VIN=5V CIN=10uF Cout=10uF Tantalum IOUT=0.1A

Copyright  ANPEC Electronics Corp. Rev. A.4 - Jun., 2003 APL1086 www.anpec.com.tw6 0.9 1.4 1.9 2.4 2.9 3.4 0369 1 2 Typical Characteristics Cont. 02468 1 0 Current Limit vs. Input Voltage 2.7 2.8 3.1 3.2 3.3 3.4 3.0 2.9 -50 -25 0 25 50 75 100 125 Output Voltage vs. Temperature Output Voltage (V) Temperature (°C) Input Voltage (V) Input Current vs. Input Voltage Input Voltage (V) Input Current (mA) Current Limit (A) Vout=1.25V Output Voltage vs. Temperature Output Voltage (V) Temperature (°C) 1.6 1.7 1.8 1.9 2.1 2.2 2.3 2.4 2.5 2.6 -50 -25 0 25 50 75 100 125

Copyright  ANPEC Electronics Corp. Rev. A.4 - Jun., 2003 APL1086 www.anpec.com.tw7 Adjustable Pin Current vs. Temperature Adjustable Pin Current ( µ A) Temperature ( C)° -50 0 50 100 125-25 25 75 Typical Characteristics Cont. Temperature ( C)° Input Current vs. Temperature Input Current (mA) -50 0 50 100 125-25 25 75 /G20 1.5 1.7 1.9 2.1 2.3 2.5 2.7 2.9 -5 0 -3 0 -1 0 1 0 3 0 5 0 7 0 9 0 1 10 1 30 1 50 Current Limit vs. Temperature Temperature (°C) Current Limit (mA) Vin-Vout=5V

Copyright  ANPEC Electronics Corp. Rev. A.4 - Jun., 2003 APL1086 www.anpec.com.tw8

Package Information

SOT-223( Reference JEDEC Registration SOT-223) D H E K e A c L a B b Millimeters InchesDim Min. Max. Min. Max. A 1.50 1.80 0.06 0.07 A1 0.02 0.08 B 0.60 0.80 0.02 0.03 B1 2.90 3.10 0.11 0.12 c 0.28 0.32 0.01 0.01 D 6.30 6.70 0.25 0.26 E 3.30 3.70 0.13 0.15 e 2.3 BSC 0.09 BSC e1 4.6 BSC 0.18 BSC H 6.70 7.30 0.26 0.29 L 0.91 1.10 0.04 0.04 K 1.50 2.00 0.06 0.08 α 0° 10° 0° 10° β 13° 13°

Copyright  ANPEC Electronics Corp. Rev. A.4 - Jun., 2003 APL1086 www.anpec.com.tw9 Package Informaion TO-252( Reference JEDEC Registration TO-252) Millimeters InchesDim Min. Max. Min. Max. A 2.18 2.39 0.086 0.094 A1 0.89 1.27 0.035 0.050 b 0.508 0.89 0.020 0.035 b2 5.207 5.461 0.205 0.215 C 0.46 0.58 0.018 0.023 C1 0.46 0.58 0.018 0.023 D 5.334 6.22 0.210 0.245 D1 5.2 REF 0.205 REF E 6.35 6.73 0.250 0.265 E1 5.3 REF 0.209 REF e1 3.96 5.18 0.156 0.204 H 9.398 10.41 0.370 0.410 L 0.51 0.020 L1 0.64 1.02 0.025 0.040 L2 0.89 2.032 0.035 0.080 D b E A H L C

Copyright  ANPEC Electronics Corp. Rev. A.4 - Jun., 2003 APL1086 www.anpec.com.tw10 Package Informaion TO-220 ( Reference JEDEC Registration TO-220) Q D R E F J1 e e1b1 A c b L Millimeters Inches Dim Min. Max. Min. Max. A 3.56 4.83 0.140 0.190 b1 1.14 1.78 0.045 0.070 b 0.51 1.14 0.020 0.045 c 0.31 1.14 0.012 0.045 D 14.23 16.51 0.560 0.650 e 2.29 2.79 0.090 0.110 e1 4.83 5.33 0.190 0.210 E 9.65 10.67 0.380 0.420 F 0.51 1.40 0.020 0.055 H1 5.84 6.86 0.230 0.270 J1 2.03 2.92 0.080 0.115 L 12.7 14.73 0.500 0.580 L1 3.65 6.35 0.143 0.250 R 3.53 4.09 0.139 0.161 Q 2.54 3.43 0.100 0.135

Copyright  ANPEC Electronics Corp. Rev. A.4 - Jun., 2003 APL1086 www.anpec.com.tw11 Package Informaion TO-263 ( Reference JEDEC Registration TO-263) E D L b e c A Millimeters Inches Dim Min. Max. Min. Max. A 4.06 4.83 0.160 0.190 b 0.51 0.992 0.02 0.039 b2 1.14 1.399 0.045 0.055 c 0.38 TYP. 0.015 TYP . c2 1.14 1.40 0.045 0.055 D 8.64 9.65 0.340 0.380 E 9.66 10.299 0.380 0.405 e 2.543 BSC. 0.100 BSC. L 14.60 15.88 0.575 0.625 L1 2.24 2. 84 0.090 0.110 L2 -2 . 9 2 -0 . 1 1 5 L3 1.20 1.78 0.050 0.070

Copyright  ANPEC Electronics Corp. Rev. A.4 - Jun., 2003 APL1086 www.anpec.com.tw12 Physical Specifications Pre-heat temperature 183 C Peak temperature Time temperature Classification Reflow Profiles Convection or IR/ Convection VPR Average ramp-up rate(183°C to Peak) 3 °C/second max. 10 °C /second max. Preheat temperature 125 ± 25°C) 120 seconds max Temperature maintained above 183°C 60 – 150 seconds Time within 5°C of actual peak temperature 10 –20 seconds 60 seconds Peak temperature range 220 +5/-0°C or 235 +5/-0°C 215-219 °C or 235 +5/-0°C Ramp-down rate 6 °C /second max. 10 °C /second max. Time 25°C to peak temperature 6 minutes max. Package Reflow Conditions pkg. thickness ≥≥≥≥ 2.5mm and all bgas pkg. thickness < 2.5mm and pkg. volume ≥≥≥≥ 350 mm³ pkg. thickness < 2.5mm and pkg. volume < 350mm³ Convection 220 +5/-0 °C Convection 235 +5/-0 °C VPR 215-219 °C VPR 235 +5/-0 °C IR/Convection 220 +5/-0 °C IR/Convection 235 +5/-0 °C Terminal Material Solder-Plated Copper (Solder Material : 90/10 or 63/37 SnPb) Lead Solderability Meets EIA Specification RSI86-91, ANSI/J-STD-002 Category 3. Reference JEDEC Standard J-STD-020A APRIL 1999 Reflow Condition (IR/Convection or VPR Reflow)

Copyright  ANPEC Electronics Corp. Rev. A.4 - Jun., 2003 APL1086 www.anpec.com.tw13 Reliability test program Test item Method Description SOLDERABILITY MIL-STD-883D-2003 245°C , 5 SEC HOLT MIL-STD-883D-1005.7 1000 Hrs Bias @ 125 °C PCT JESD-22-B, A102 168 Hrs, 100 % RH , 121 °C TST MIL-STD-883D-1011.9 -65°C ~ 150 °C, 200 Cycles ESD MIL-STD-883D-3015.7 VHBM > 2KV, VMM > 200V Latch-Up JESD 78 10ms , I tr > 100mA t Ao E W Po P Ko Bo D F Carrier Tape & Reel Dimensions A J B C Application A B C J T1 T2 W P E 330 ±3 100 ± 2 13 ± 0. 5 2 ± 0.5 16.4 + 0.3 F D D1 Po P1 Ao Bo Ko tTO-252 Application A B C J T1 T2 W P E 380 ±3 80 ± 2 13 ± 0. 5 2 ± 0.5 24 ± 42 ± 0.3 24 + 0.3 F D D1 Po P1 Ao Bo Ko tTO-263 ( m m )

Copyright  ANPEC Electronics Corp. Rev. A.4 - Jun., 2003 APL1086 www.anpec.com.tw14 Application Carrier Width Cover Tape Width Devices Per Reel TO- 252 16 13.3 2500 TO- 263 24 21.3 1000 SOT- 223 12 9.3 2500 Application A B C J T1 T2 W P E 330 ±16 2 ±1.5 12.75 ± F D D1 Po P1 Ao Bo Ko tSOT-223 ( m m ) Cover Tape Dimensions Customer Service Anpec Electronics Corp. Head Office : 5F, No. 2 Li-Hsin Road, SBIP, Hsin-Chu, Taiwan, R.O.C. Tel : 886-3-5642000 Fax : 886-3-5642050 Taipei Branch : 7F, No. 137, Lane 235, Pac Chiao Rd., Hsin Tien City, Taipei Hsien, Taiwan, R. O. C. Tel : 886-2-89191368 Fax : 886-2-89191369 Reel Dimensions (Cont.)