APC2010A

APC TTELEC | Alldatasheet

Document overview

• Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
• PDF pages: 3

Technical content

Precision thin film technology Two grades of sulphur protection Precision to ±0.05% and ±10ppm/°C AEC-Q200 qualified option Anti-sulphur tested to EIA-977 cond. B & ASTM-B-809-95 modified 08.20 General Note TT Electronics reserves the right to make changes in product specification without notice or liability. All information is subject to TT Electronics’ own data and is considered accurate at time of going to print. © TT Electronics plc www.ttelectronics.com/resistors BI Technologies IRC Welwyn Range Sulphur protection grade Test applied AEC-Q200 qualified High power option SR Sulphur Resistant ASTM-B-809-95 modified AS Anti-Sulphur EIA-977 cond. B Summary of Types Electrical Data – SR Range Electrical Data – AS High Power Range Electrical Data – AS Range Type TCR (ppm/°C) Power (W) Limiting Element Voltage (V) Ohmic Value Range APC0402R 25, 50 0.063 50 10 -100K APC0603R 25, 50 0.063 50 4.7 330K APC0805R 25, 50 0.1 100 10 APC1206R 25, 50 0.125 200 10 APC1210R 25, 50 0.25 200 10 APC2010R 25, 50 0.5 200 10 1.5M APC2512R 25, 50 0.75 200 10 1.5M Type TCR (ppm/°C) Power (W) Limiting Element Voltage (V) Ohmic Value Range APC0603AH 10, 15, 25, 50 0.1 75 10 49.9K 10 332K APC0805AH 10 0.125 150 10 100K 10 511K 15, 25, 50 10 APC1206AH 10, 15, 25, 50 0.25 200 10 200K 10 APC1210AH 10, 15, 25, 50 0.33 200 10 499K 10 APC2010AH 10, 15, 25, 50 0.33 200 10 499K 10 Type TCR (ppm/°C) Power (W) Limiting Element Voltage (V) Ohmic Value Range APC0402A 0.063 25 49.9 – 10K 15 49.9 – 10K 49.9 – 69.8K 25, 50 49.9 – 10K 49.9 – 100K APC0603A 10, 15, 25, 50 0.063 50 10 – 49.9K 10 – 332K APC0805A 10 0.1 100 10 – 100K 10 – 511K 15, 25, 50 10 – 1M APC1206A 10, 15, 25, 50 0.125 150 10 – 200K 10 – 1M APC1210A 10, 15, 25, 50 0.25 150 10 – 499K 10 – 1M APC2010A 10, 15, 25, 50 0.25 150 10 – 499K 10 – 1M APC2512A 10, 15, 25, 50 0.5 150 10 – 499K 10 – 1M All parts are Pb-free and comply with EU Directive 2011/65/EU amended by (EU) (RoHS3) Resistors Anti-Sulphur Precision Chip APC Series

A thin- film ma terial is selectiv ely deposit ed on an alumina sub strate t ogether with me tallic c ontacts a t each end of the r esistor. The unadjus ted r esistors ar e hea t tr eated t o giv e the r equired T CR and s tability, then a pr ecisely c ontrolled laser trim pr ocess adjus ts the r esistance v alue. Epo xy pr otection is applied, and wr ap-around t erminations ar e added and pla ted. E ach resistor is measured immediately before packing into tape. Marking APC r esistors siz e 0603 and lar ger ar e mark ed whit e on black with 3 or 4 char acters indic ating ohmic v alue. APC0402 is not marked. Anti-Sulphur Precision Chip APC Series 08.20 General Note TT Electronics reserves the right to make changes in product specification without notice or liability. All information is subject to TT Electronics’ own data and is considered accurate at time of going to print. © TT Electronics plc www.ttelectronics.com/resistors BI Technologies IRC Welwyn Physical Data Performance Data Dimensions (mm) and weight (mg) Size L W C A T Wt 0402 1 ±0.1 0.5 ±0.05 0.3 ±0.15 0.25 0603 1.55 ±0.1 0.8 ±0.1 0.3 ±0.2 0.3 ±0.2 0.45 ±0.1 1.8 0805 2 ±0.15 1.25 ±0.15 0.3 ±0.2 0.4 ±0.2 0.55 ±0.1 4.7 1206 3.05 ±0.15 1.55 ±0.15 0.42 ±0.2 0.35 ±0.25 0.55 ±0.1 9.0 1210 3.1 ±0.15 2.6 ±0.15 0.5 ±0.2 0.5 ±0.25 0.55 ±0.1 10 2010 4.9 ±0.15 2.5 ±0.15 0.6 ±0.3 0.6 ±0.25 0.55 ±0.1 24 2512 6.3 ±0.15 3.2 ±0.15 0.6 ±0.3 0.9 ±0.25 0.55 ±0.1 38 Test Condition SR Range ±ΔR% AS Range (AEC-Q200) ±ΔR% 0.05% tol. ≥0.1% tol. High Temperature Exposure MIL-STD-202 Method 108 0.3 0.2 Temperature Cycling JESD22 Method JA-104 0.3 0.1 Biased Humidity MIL-STD-202 Method 103 0.3 0.1 Operational Life MIL-STD-202 Method 108 0.3 ≤7K0: 0.05 >7K0: 0.2 0.2 High Power range: 0.5 Terminal Strength MIL-STD202 Method 211 No Damage No Damage Resistance to Solvents MIL-STD202 Method

215 Marking

Mechanical Shock MIL-STD202 Method 213 0.25 0.05 0.1 Vibration MIL-STD202 Method 204 0.1 0.05 0.1 Resistance to Soldering Heat MIL-STD-202 Method 210 0.2 0.05 ESD AEC-Q200-002 or ISO/DIS 10605 - 0.5 Solder ability J-STD-002 >95% covered, no visible damage >95% covered, no visible damage Flammability UL-94 - No ignition Board Flex AEC Q200-005 0.1 0.1 Short Term Overload 2.5xRCWV for 5seconds 0.1 0.05 Sulphur Test EIA-977 cond. B 750hr 105°C, no humidity - 1 ASTM-B-809-95 modified 1000hr 105°C, 85% RH 4 - T WA A L Wrap-around terminations (3 faces) C

Anti-Sulphur Precision Chip APC Series 08.20 General Note TT Electronics reserves the right to make changes in product specification without notice or liability. All information is subject to TT Electronics’ own data and is considered accurate at time of going to print. © TT Electronics plc www.ttelectronics.com/resistors BI Technologies IRC Welwyn Application Notes APC resistors are ideally suited for handling by automatic methods due to their rectangular shape and the small dimensional tolerances. Electrical connection to a ceramic substrate or to a printed circuit board can be made by reflow or wave soldering of wrap-around terminations. Wrap-around terminations provide good leach properties and ensure reliable contact. Due to the robust construction, the APC can be immersed in the solder bath for 30 seconds at 260°C. This enables the resistor to be mounted on one side of a printed circuit board and wire-leaded components applied on the other side. General Note TT Electronics reserves the right to make changes in product specificaon without noce or liability. All informaon is subject to TTElectronics’ own data and is considered accurate atme of going to print. BI Technologies IRC Welwyn hps://www.electronics.com/resistors © TT Electronics plc An-Sulphur Precision Chip APC Series Resistors Applicaon Notes APC resistors are ideally suited for handling by automac methods due to their rectangular shape and the small dimensional tolerances. Electrical connecon to a ceramic substrate or to a printed circuit board can be made by reflow or wave soldering of wrap-around terminaons. Wrap-around terminaons provide good leach properes and ensure reliable contact. Due to the robust construcon, the PCF can be immersed in the solder bath f or 30 seco nds at 260°C. This enables the resist or to be mounted on one side of a printed circuit board and wire- leaded components applied on the other side. Ordering Procedure Example: APC1206AHY-1K54WT5 (1206, an sulphur grade, high power range, 15ppm/°C, 1.54 kilohms ±0.05%, Pb-free) Note – Se e Electrical Data for valid combinaons of size, sulphur grade and range A P C 1 2 0 6 A H Y - 1 K 5 4 W T 5 1 2 3 4 5 6 7 8 1 2 3 4 5 6 7 8 Type Size Sulp hur Grade Range TCR Value Tolerance Packing APC 0402 A = AS Range Omit for Standard T = ±10ppm/°C E24 / E96 3/4 characters R = ohms K = kilohms M = megohms W = ±0.05% T10 0402 10,000/reel 0603 R = SR Range H = High Power Y = ±15ppm/°C B = ±0.1% T5 0603 to 1210 5000/reel 0805 D = ±25ppm/°C C = ±0.25% T4 2010, 2512 4000/reel

1210 F = ±1%

TT Electronics reservesthe right to make changes in product specification without notice or liability. All information is subject to TT Electronics’ own data and is considered accurate at time of going to print. BI Technologies IRC Welwyn www.ttelectronics.com/resistors © TT Electronics plc 06.18 High Pulse Double-Sided Chip Resistors HDSC Series 1 2 H D S C 2 5 1 2 - 1 0 K J T 1 8 Thermal Performance Data Packaging 0603, 0805 and 1206 resistors are supplied on 8mm carrier tape and 2010 and 2512 resistors are supplied on 12 mm carrier tape, all on 7 inch reels as per IEC 286-3. Application Notes HDSC resistors are ideally suited for handling by automatic methods due to their rectangularshape and the small dimensionaltolerances. Electrical connection to aceramic substrate or to a printed circuit board can be made by reflow or wave soldering of wrap-around terminations. Wrap-around terminations providegood leach propertiesand ensurereliablecontact. Due to the robust construction, the HDSC can be immersed in the solder bath for 30 seconds at260°C. This enables the resistor to be mounted on one side Ordering Procedure of a printed circuit board and wire-leaded components applied on the other side. HDSC is compatible with typicalPb-freesolderingmaterialsandtemperature profiles. HDSC resistors themselves can operate at a maximum temperatureof 155°C. For solderedresistors,the joint temperatureshould not exceed 110°C. This condition is met when the stated power levels at 70°C and recommended pad and trace areasareused. Pad and trace area is defined as the total area of the solder pad plus all copper trace within two squares of the edge of the solder pad. Allowance should be made if smaller areasof copper are used. Example: HDSC2512-10KJT18 (HDSC2512, 10 kilohms ±5%, Pb-free) 3 4 5 Type Size 3 4 Tolerance Termination & Packing HDSC 0603 E24 = 3/4 characters R = ohms K = kilohms M = megohms J = ±5% Standard Pb-free finish

0805 K = ±10%

3000/reel standard1206 M = ±20% 1206 2010 2010

2512 T18 2512 1800/reel standard

T1 All sizes 1000/reel available SnPb finish PB All sizes Standard quantities as for Pb-free Thermal Performance Data