8066F FPE | Alldatasheet

Document overview

  • Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
  • PDF pages: 2

Technical content

http://www.fpe.com.cn8060F Series Series 1、Features  Operating temperature -40℃~130℃  Suitable for lead-free reflow soldering  Compliance with RoHS and Halogen Free  Bifilar winding  AEC-Q200 qualified 2、Application  Used radiation noise suppression for automotive CAN-BUS / Flex Ray systems  Used for Industrial field bus systems 3、外形尺寸 SHAPES AND DIMENSIONS (Unit:mm) 4、电路图 Schematic Diagram Series A B C D1 D2

http://www.fpe.com.cn 5、电性规格 Specification 6、焊接和安装 Soldering and Mounting 6-1. Soldering

6.2 Solder re-flow:

6.3 Soldering Iron(Figure 2):

7、包装信息 Packaging Information Part Number Inductance(uH) [100kHz/0.1V] 测量端 1--3，min DC Resistance (Ω)Max. 测量端 1--3 Q 值 测量端 1--3 min 绝缘电阻(MΩ) 500V DC 测量端绕组～磁芯 min 耐电压 (VDC) ,1mA/3s 测量端绕组～绕组) min AP8066F-301L 300 1.0 3 100 1000 AP8066F-401L 400 1.0 3 100 1000 Series Chip/Reel Carton 8066F 1000 10000 Recommended temperature profiles for re-flow soldering in Figure 1. Mildly activated rosin fluxes are preferred. FPE terminations are suitable for all wave and re-flow soldering systems. If hand soldering cannot be avoided, the preferred technique is the utilization of hot air soldering tools. Products attachment with a soldering iron is discouraged due to the inherent process control limitations. In the event that a soldering iron must be employed the following precautions are recommended. ‧Preheat circuit and products to 150℃ ‧Never contact the ceramic with the iron tip ‧Use a 20 watt soldering iron with tip diameter of 1.0mm ‧350℃ tip temperature (max) ‧1.0mm tip diameter (max) ‧Limit soldering time to 4~5 sec.