2012F FPE | Alldatasheet
Document overview
- Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
- PDF pages: 2
Technical content
http://www.fpe.com.cn2012F Series Series A B C 1.10 2.70 0.40 1.45 suggested PCB layout 1、Features Operating temperature -40℃~150℃ Suitable for lead-free reflow soldering Compliance with RoHS and Halogen Free Bifilar winding AEC-Q200 qualified 2、Application Used radiation noise suppression for automotive CAN-BUS / Flex Ray systems Used for Industrial field bus systems 3、外形尺寸 SHAPES AND DIMENSIONS (Unit:mm) 4、电路图 Schematic Diagram Series A B C D1 D2
http://www.fpe.com.cn 5、电性规格 Specification 6、焊接和安装 Soldering and Mounting 6-1. Soldering
6.2 Solder re-flow:
6.3 Soldering Iron(Figure 2):
7、包装信息 Packaging Information Part Number Common mode Impedance (Ω) [Test Frequency 100MHz] DC Resistance (Ω) Max. Capacitance (pF)Max Rated Current (mA)Max. Rated Volt. (Vdc)Max. Withstand Volt. (Vdc) Max. IR (Ω) Min. AC2012F-900Z 90±25% 0.19 5 400 50 125 10M AC2012F-121Z 120±25% 0.22 5 370 50 125 10M AC2012F-201Z 200±25% 0.25 5 350 50 125 10M AC2012F-361Z 360±25% 0.50 5 220 50 125 10M AC2012F-681Z 681±25% 1.30 5 200 50 125 10M AC2012F-102Z 1000±25% 1.50 5 190 50 125 10M AC2012F-222Z 2200±25% 2.50 5 150 50 125 10M Series Chip/Reel Carton 2012F 10000 100000 Recommended temperature profiles for re-flow soldering in Figure 1. Mildly activated rosin fluxes are preferred. FPE terminations are suitable for all wave and re-flow soldering systems. If hand soldering cannot be avoided, the preferred technique is the utilization of hot air soldering tools. Products attachment with a soldering iron is discouraged due to the inherent process control limitations. In the event that a soldering iron must be employed the following precautions are recommended. ‧Preheat circuit and products to 150℃ ‧Never contact the ceramic with the iron tip ‧Use a 20 watt soldering iron with tip diameter of 1.0mm ‧350℃ tip temperature (max) ‧1.0mm tip diameter (max) ‧Limit soldering time to 4~5 sec.