AP3216SURCK TO-GRACE | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 4

Technical content

© 2018 Kingbright. All Rights Reserved. Spec No: DSAD0981 / 1203000423 Rev No: V.11A Date: 11/13/2018 Page 1 / 4 DESCRIPTIONS z The Hyper Red source color devices are made with AlGaInP on GaAs substrate Light Emitting Diode z Electrostatic discharge and power surge could damage the LEDs z It is recommended to use a wrist band or anti-electrostatic glove when handling the LEDs z All devices, equipments and machineries must be electrically grounded

FEATURES

z 3.2 mm x 1.6 mm SMD LED, 1.1 mm thickness z Low power consumption z Wide viewing angle z Ideal for backlight and indicator z Package: 2000 pcs / reel z Moisture sensitivity level: 3 z RoHS compliant

APPLICATIONS

z Home and smart appliances z Wearable and portable devices z Healthcare applications ATTENTION Observe precautions for handling electrostatic discharge sensitive devices PACKAGE DIMENSIONS SELECTION GUIDE Notes: 1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 of the optical peak value. 2. Luminous intensity / luminous flux: +/-15%. * Luminous intensity value is traceable to CIE127-2007 standards. AP3216SURCK 3.2 x 1.6 mm SMD Chip LED Lamp RECOMMENDED SOLDERING PATTERN (units : mm; tolerance : ± 0.1) Part Number Emitting Color (Material) Lens Type Iv (mcd) @ 20mA [2] Viewing Angle [1] Min. Typ. 2θ1/2 AP3216SURCK ■ Hyper Red (AlGaInP) Water Clear 120 230 *40 *80 140° Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.2(0.0079") unless otherwise noted. 3. The s pecifications, characteristics and technical data described in the datasheet are subject to change without prior notice. 4. The device has a single mounting surface. The device must be mounted according to the specifications. 香港至恩科技有限公司 www.to-grace.com 公司授权代理销售LITE-ON:光耦，贴片LED灯等 进口原装，现货供应，价格优势，技术支持 电话：0755-83464948 传真：0755-83464076 A ll data sheet. com

© 2018 Kingbright. All Rights Reserved. Spec No: DSAD0981 / 1203000423 Rev No: V.11A Date: 11/13/2018 Page 2 / 4 ABSOLUTE MAXIMUM RATINGS at TA=25°C ELECTRICAL / OPTICAL CHARACTERISTICS at TA=25°C AP3216SURCK Parameter Symbol Emitting Color Value Unit Typ. Max. Wavelength at Peak Emission IF = 20mA λpeak Hyper Red 645 - nm Dominant Wavelength IF = 20mA λdom [1] Hyper Red 630 - nm Spectral Bandwidth at 50% Φ REL MAX IF = 20mA Δλ Hyper Red 28 - nm Capacitance C Hyper Red 35 - pF Forward Voltage IF = 20mA VF [2] Hyper Red 1.95 2.5 V Reverse Current (VR = 5V) IR Hyper Red - 10 uA Parameter Symbol Value Unit Power Dissipation PD 75 mW Reverse Voltage VR 5 V Junction Temperature Tj 115 °C Operating Temperature Top -40 to +85 °C Storage Temperature Tstg -40 to +85 °C DC Forward Current IF 30 mA Peak Forward Current IFM [1] 185 mA Electrostatic Discharge Threshold (HBM) - 3000 V Notes: 1. The dominant wavelength (λd) above is the setup value of the sorting machine. (Tolerance λd : ±1nm. ) 2. Forward voltage: ±0.1V. 3. Wavelength value is traceable to CIE127-2007 standards. 4. Excess driving current and / or operating temperature higher than recommended conditions may result in severe light degradation or premature failure. Notes: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. 2. Relative humidity levels maintained between 40% and 60% in production area are recommended to avoid the build-up of static electricity – Ref JEDEC/JESD625-A and JEDEC/J-STD-033. A ll data sheet. com

© 2018 Kingbright. All Rights Reserved. Spec No: DSAD0981 / 1203000423 Rev No: V.11A Date: 11/13/2018 Page 3 / 4 20% 40% 60% 80% 100% 350 400 450 500 550 600 650 700 750 800 Ta = 25 °C Red Wavelength (nm) Relative Intensity (a. u.) 0.5 0.5 90° 15°0° 30° 45° 60° 75° -15° -30° -45° -60° -75° -90° 0.01.0 1.0 Ta = 25 °C TECHNICAL DATA RELATIVE INTENSITY vs. WAVELENGTH HYPER RED TAPE SPECIFICATIONS (units : mm) REEL DIMENSION (units : mm) REFLOW SOLDERING PROFILE for LEAD-FREE SMD PROCESS SPATIAL DISTRIBUTION AP3216SURCK Ta = 25 °C Forward voltage (V) Forward current (mA) 0.0 0.5 1.0 1.5 2.0 2.5 0 1 02 03 04 05 0 T a = 25 °C Forward current (mA) Luminous intensity normalised at 20 mA -40 -20 0 20 40 60 80 100 Ambient temperature (°C) Permissible forward current (mA) 0.0 0.5 1.0 1.5 2.0 2.5 -40 -20 0 20 40 60 80 100 Ambient temperature (°C) Luminous intensity normalised at T a = 25 °C Forward Current vs. Forward Voltage Luminous Intensity vs. Forward Current Forward Current Derating Curve Luminous Intensity vs. Ambient Temperature Notes: 1. Don't cause stress to the LEDs while it is exposed to high temperature. 2. The maximum number of reflow soldering passes is 2 times. 3. Reflow soldering is recommended. Other soldering methods are not recommended as they might cause damage to the product. A ll data sheet. com

© 2018 Kingbright. All Rights Reserved. Spec No: DSAD0981 / 1203000423 Rev No: V.11A Date: 11/13/2018 Page 4 / 4 PACKING & LABEL SPECIFICATIONS AP3216SURCK PRECAUTIONARY NOTES 1. The information included in this document reflects representative usage scenarios and is in tended for technical reference only. 2. The part number, type, and specifications mentioned in this document are subject to future change and improvement without notice. Before production usage customer should refer to the latest datasheet for the updated specifications. 3. When using the products referenced in this document, please make sure the product is being operated within the environmental and electrical limits specified in the datasheet. If customer usage exceeds the specified limits, Kingbright will not be responsible for any subsequent issues. 4. The information in this document applies to typical usage in consumer electronics applications. If customer's application has special reliability requirements or have life-threatening liabilities, such as automotive or medical usage, please consult with Kingbright representative for further assistance. 5. The contents and information of this document may not be reproduced or re-transmitted without permission by Kingbright. 6. All design applications should refer to Kingbright application notes available at https://www.KingbrightUSA.com/ApplicationNotes A ll data sheet. com